2007 KIA CARNIVAL gas type

2007 > 2.7L V6 GASOLINE >
DESCRIPTION
Inhibitor Switch
- Type: Rotary contact type
- Range of temperature : - 40°C~145°C( - 40°F~293°F)
Inhibitor Switch - Continuity check(Sports mode)

2007 > 2.7L V6 GASOLINE >
SPECIFICATION
Engine type µ 2.7
Manual transaxle type M5GF2
Gear ratio 1st 3.615
2nd 1.931
3rd 1.969
4th 1.273
5th 0.974
Reverse 3.416
Final gear ratio 5.071
3.737
T/M oil capacity(ℓ) ※ 1.9 liter (2.0077US qt, 1.6718mp qt)
※ The quantity in the chart above is for the reference. The actual filling quantity of the automatic transaxle fluid must
be set according to 'INSPECTION' or 'REPLACEMENT' procedure of the automatic transaxle fluid.
Recommended transaxle oil SAE75W/85 or API GL - 4
Check&Replenishment Every one year or every 100,000km
Replacement Private useNormal use
No service required
Severe use( ※)
Every 100,000 Km
Business use
※ Severe use(marked '※') is defined as:
1. Driving on rough road(bumpy road, gravel road, snowy road, unpaved road etc.).
2. Driving on mountain road, ascent/descent.
3. Repetition of short distance driving.
4. More than 50% operation in heavy city traffic during hot weather above 32°C(89.6°F).
5. Police car, Taxi, Commercial type operation or trailer towing, etc.
TIGHTENING TORQUE
Item Nmkgf.m lb- ft
Oil drain plug 30~353.0~3.521.7~25.3
Oil filler plug 30~353.0~3.521.7~25.3
Back up lamp switch 30~353.0~3.521.7~25.3
Control shaft assembly 10~121.0~1.2 7.2~8.7
Select lever 43~554.3~5.531.1~39.8
Shift link assembly 43~554.3~5.531.1~39.8
Transaxle mounting bracket assembly 65~856.5~8.547.0~61.5
Transaxle and enging mounting bolt 65~856.5~8.547.0~61.5
SERVICE STANDARD Item Specification [mm(inch)]

2007 > 2.7L V6 GASOLINE >
SERVICE ADJUSTMENT PROCEDURE
Transmission oil inspection and replacement
1. After parking the vehicle on a plain, stop the engine.
2. After removing the oil filler plug and washer, inspect the manual transaxle fluid condition and quantity.
3. If the manual transaxle fluid is contaminated, drain it out by removing the oil drain plug.
4. Tighten the new oil drain plug and feed manual transaxle fluid to a proper level.
TORQUE:
29.4~34.4 Nm(3.0~3.5kgf.m, 21.7~25.3lb - ft)
Oil type: SAE75W/85
Oil quantity:
1.9 liter(2.0077 US qt, 1.6718 lmp qt)
5. Retighten the oil filler plug with a new washer.
TORQUE:
29.4~34.4 Nm(3.0~3.5kgf.m, 21.7~25.3lb - ft)
Back up lamp switch inspection
1.Disconnect the back up lamp switch connector(B).
2.Inspect the continuity of the switch. When the shift lever is located in reverse range, it should be applied an electric
current.
3. Replace the back up lamp switch, if necessary.
TORQUE:
29.4~34.4 Nm(3.0~3.5kgf.m, 21.7~25.3lb - ft)

2007 > 2.7L V6 GASOLINE >
SPECIAL TOOLS
Tool(Number and name) IllustrationUse
Tie rod end puller
09568 - 4A000
Separation of a lower arm and a tie
rod end ball joint
Front hub remover and installer
09517 - 21500
Removal of a front hub from a
knuckle.
(use with 09517 - 21600)
Main shaft bearing puller
09432 - 11000
Removla of a tone wheel from a
driveshaft
09495 - 3K000
Band installer
Installation of ear type boot band
09495 - 39100
Band installer
Installation of hook type boot band

2007 > 2.7L V6 GASOLINE >
SPECIFICATIONS
Driveshaft
Engine Transaxle Joint type
Max. permissible angle
Inner Outer InnerOuter
2.9 CRDi M/T
TSJ#26 BJ#2846.5° 23°
A/T UTJ- II#25 BJ#2646.5° 23°
3.8 MPI A/TUTJ- II#25 BJ#2646.5° 23°
Front hub & bearing assembly
Starting torque 1.97 Nm (20 kgf.cm, 1.45 lb - ft)
Rear hub & bearing assembly
Starting torque y 1.97 Nm (20 kgf.cm, 1.45 lb - ft)
Inner: On transaxle side
Outer : On tire side
TGHTENING TORQUE
Items NmKgf.m lb- ft
Hub nut 90 ~ 1109.0 ~ 11.0 65 ~ 80
Driveshaft lock nut 245 ~ 27524.5 ~ 27.5 177 ~ 199
Tie rod end castle nut 60 ~ 806.0 ~ 8.0 43 ~ 58
Front lower arm to knuckle bolt & nut 90 ~ 1209.0 ~ 12.0 65 ~ 87
Inner shaft bearing & bracket assembly bolts
(DSL) 43 ~ 63
4.3 ~ 6.3 31 ~ 46
Inner shaft bearing & bracket assembly bolts
(GSL) 50 ~ 65
5.0 ~ 6.5 36 ~ 47
Front caliper assembly to knuckle bolts 85 ~ 1008.5 ~ 10.0 61 ~ 72
Front strut assembly to knuckle bolts 100 ~ 12010.0 ~ 12.0 72 ~ 87
Front hub & bearing assembly to knuckle
bolts 160 ~ 180
16.0 ~ 18.0 116 ~ 130
Rear lower arm to carrier bolt & nut 160 ~ 18016.0 ~ 18.0 116 ~ 130
Rear caliper assembly to carrier assembly
bolts 50 ~ 60
5.0 ~ 6.0y 36.2 ~ 43.4
Rear hub lock nut 200 ~ 26020.0 ~ 26.0 145 ~ 188
Rear brake assembly to carrier assembly bolts 50 ~ 605.0 ~ 6.0 36 ~ 43
Carrier assembly to assist arm bolt 90 ~ 1009.0 ~ 10.0 65 ~72
Carrier assembly to upper arm bolt 90 ~ 1009.0 ~ 10.0 65 ~72
LUBRICANTS
Joint type Recommended grease Quantity

2007 > 2.7L V6 GASOLINE >
SPECIFICATIONS
FRONT SUSPENSION SYSTEM
Items Specification
Type Macpherson strut
Shock Absorber Type
Gas
Stroke mm (in) 195.5 (7.70)
Expansion mm (in) 595.5 ± 3 (23.44 ± 0.12)
Compression mm (in) 400 + 3, - Free (15.75 + 3,
Free)
I.D. Color DIESEL
WHITE
GASOLINE RED
Damping force (0.3 m/s) DIESEL
Expansion N(kgf)
1265 ± 186 (129 ± 19)
Compression N (kgf) 618 ± 108 (63 ± 11)
GASOLINEy Expansion N(kgf)
980 ± 220 (100 ± 15)
Compression N (kgf) 588 ± 118 (60 ± 12)
Spring DIESEL
Free height mm (in)
418.9 (16.49)
Load(kg) I.D. Color594.8~606.7
Yellow 2 point
y
582.9~594.7 yYellow 1 point
GASOLINE Free height mm (in)
415.9 (16.37)
Load(kg) I.D. Color550.0~561.2
Green 2 point
y
538.8~549.9 Green 1 point
REAR SUSPENSION SYSTEM Items Specification
Type Multi Link
Shock Absorber Type
Gas
Stroke mm (in) 170 (6.68)
Expansion mm (in) 478.0 ± 3 (18.82 ± 0.12)
Compression mm (in) 308 + 3, - Free
(12.13 + 0.12, - Free)
I.D. Color DIESEL
WHITE
GASOLINE RED
Damping force (0.3 m/s) DIESEL
Expansion N(kgf)
1540 ± 216 (157 ± 22)
Compression N (kgf) 647 ± 127 (66 ± 13)
GASOLINE Expansion N(kgf)
1422 ± 206 (145 ± 21)
Compression N (kgf) 549 ± 108 (56 ± 11)
DIESEL Free height mm (in)
286.7 (11.29)
Load(kg) I.D. Color642.2~674.7
Yellow 2 point
y

2007 > 2.7L V6 GASOLINE >
SPECIFICATIONS
Items Specifications
Steering column/ shaft Type
Tilt
Tilt stroke +7°/ - 11.7°
Steering gear Type
Rack & pinion
Rack stroke VRS On
148 mm (5.827 in)
VRS Off 156 mm (6.142 in)
Power steering pump Type
Vane
Diesel Relief pressure
90 kgf/cm²
Discharge 9.6 cc/rev
Gasoline Relief pressure
90 kgf/cm²
Discharge 10.5 cc/rev
SERVICE STANDARD
Items Specifications
Steering wheel free play 30 mm (1.12 in)
Steering angle VRS on
Inner
38.64°
Outer 31.78°
VRS off Inner
41.91°
Outer 33.54°
TIGHTENING TORQUE
Items NmKgf.m Lb- ft
Steering wheel lock nut 40 ~ 504.0 ~ 5.0 29 ~ 36
Steering column mounting bolts and nut 13 ~ 181.3 ~ 1.89.4 ~ 13.0
Bolt connecting steering column to universal
joint 15 ~ 20
1.5 ~ 2.010.8 ~ 14.5
Bolt connecting universal joint to steering gear 13 ~ 181.3 ~ 1.89.4 ~ 13.0
Steering column mounting bolts and nut 13 ~ 181.3 ~ 1.89.4 ~ 13.0
Tie rod end castle nut 35 ~ 453.5 ~ 4.5 25 ~ 33
Front lower arm ball joint assembly bolts 90 ~ 1209.0 ~ 12.0 65 ~ 87
Stabilizer link to strut assembly nut 100 ~ 12010.0 ~ 12.0 72 ~ 87
Rear roll stopper to sub- frame bolts 50 ~ 605.0 ~ 6.0 36 ~ 43
Pressure tube to valve body housing nut 12 ~ 181.2 ~ 1.8 9 ~ 13
Pressure tube to oil pump eye bolt 65 ~ 756.5 ~ 7.5 47 ~ 54
Return tube to valve body housing nut 12 ~ 181.2 ~ 1.8 9 ~ 13
Power steering gear box to sub- frame bots 90 ~ 1109.0 ~ 11.0 65 ~ 80
LUBRICANT
Item Lubricant Quantity
Power steering fluid PSF - 31.1 L

2007 > 2.7L V6 GASOLINE >
SPECIFICATION
Air conditioner
Item Specification
Compressor Type
VS (Variable capacity)
Oil type & Capacity ND- OIL8 (PAG), 120 ± 10cc
Pulley type L5OS - TYPE
Displacement 180cc/rev
Condenser Heat rejection14,000 ± 5% kcal/hr
Dual pressure switch High [psi(kg/cm²)]
ON: 370 ± 2.8 (26.0 ± 0.2)
OFF: 455 ± 2.8 (32.0 ± 0.2)
Low ([psi(kg/cm²)] ON : 28.6 ~ 36.3 (2.00 ~ 2.55)
OFF : 28.4 ± 2.8 (2.0 ± 0.2)
Expansion valve TypeBlock
Refrigerant Type
R- 134a
Capacity [oz.(g)] 28.21 ± 0.88 (800 ± 25)
Blower unit
Item Specification
Fresh and recirculation Operating method Actuator
Blower Type
Sirocco
Speed step Auto + 8 speed (Automatic)
1~8speed (Manual)
Speed control Power mosfet
Air filter TypeParticle filter
Heater and evaporator unit
Item Specification
Heater Type
Pin & Tube type
Heating capacity 4,700 ± 5% kcal/hr
Mode operating method Actuator
Temperature operating method Actuator
Evaporator Temperature control type
Evaporator temperature sensor
A/C ON/OFF [°C(°F)] ON : 2.3 ± 0.5 (36.14 ± 32.9)
OFF: 1.3 ± 0.5 (34.34 ± 32.9)