2007 KIA CARNIVAL 2.9 diesel

2007 > 2.7L V6 GASOLINE >
IDENTIFICATION NUMBER DESCRIPTION
VEHICLE IDENTIFICATION NUMBER
1 : Geographic zone
- K = Korea
2 : Manufacturer
- N = Kia motor company
3 : Vehicle type
- A = Passenger car
4 - 5 : Vehicle Line/Series
- MB = VQ
- MC = EP
6 - 7: Body type
- 75 = Coach & GVW 2271 ~ 2720 kg
- 76 = Long coach & GVW 2271 ~ 2720 kg
8 : Engine type
- 1 = J2.9 Diesel
- 2 = µ 2.7
- 3 = λ3.8 Gasoline
9 : Transmission type
- 2 : Manual
- 5 : Automatic
10 : Model year
- 5 = 2005, 6 = 2006, 7 = 2007
11 : Plant location
- 6 = Soha plant
12 - 17 : Production sequential number
- 000001 ~ 999999
ENGINE IDENTIFICATION NUMBER
GASOLINE
1. Engine fuel
- G : Gasoline
2. Engine range
- 4 : 4 cycle 4 cylinder
- 6 : 4 cycle 6 cylinder
3. Engine development order
- D : Lambda engine
4. Engine capacity
- E : 2656 cc (µ- engine)
5. Production year
- 5 : 2005, 6 : 2006
6. Engine production sequence number
- 000001 ~ 999999

(B) on the driveshaft splines (C).
8.Add the specified grease to the joint(UTJ) boot as mush as wiped away at inspection.
9. Install the boots.
10. To control the air in the UTJ boot, keep the specified distance between the boot bands when they are tightened.
Standard value [A]
Items Standard (A) mm(in)
LH RH
2.9 Diesel M/T 505.4 (19.90)466.8 (18.38)
2.9 Diesel A/T 507.5 (19.98)466.9 (18.38)
3.8 Gasoline A/T 557.1 (21.93)570.7 (22.47)
11. Install both sides of the boot bands by using SST (09495- 39100).

2007 > 2.7L V6 GASOLINE >
SPECIFICATIONS
FRONT SUSPENSION SYSTEM
Items Specification
Type Macpherson strut
Shock Absorber Type
Gas
Stroke mm (in) 195.5 (7.70)
Expansion mm (in) 595.5 ± 3 (23.44 ± 0.12)
Compression mm (in) 400 + 3, - Free (15.75 + 3,
Free)
I.D. Color DIESEL
WHITE
GASOLINE RED
Damping force (0.3 m/s) DIESEL
Expansion N(kgf)
1265 ± 186 (129 ± 19)
Compression N (kgf) 618 ± 108 (63 ± 11)
GASOLINEy Expansion N(kgf)
980 ± 220 (100 ± 15)
Compression N (kgf) 588 ± 118 (60 ± 12)
Spring DIESEL
Free height mm (in)
418.9 (16.49)
Load(kg) I.D. Color594.8~606.7
Yellow 2 point
y
582.9~594.7 yYellow 1 point
GASOLINE Free height mm (in)
415.9 (16.37)
Load(kg) I.D. Color550.0~561.2
Green 2 point
y
538.8~549.9 Green 1 point
REAR SUSPENSION SYSTEM Items Specification
Type Multi Link
Shock Absorber Type
Gas
Stroke mm (in) 170 (6.68)
Expansion mm (in) 478.0 ± 3 (18.82 ± 0.12)
Compression mm (in) 308 + 3, - Free
(12.13 + 0.12, - Free)
I.D. Color DIESEL
WHITE
GASOLINE RED
Damping force (0.3 m/s) DIESEL
Expansion N(kgf)
1540 ± 216 (157 ± 22)
Compression N (kgf) 647 ± 127 (66 ± 13)
GASOLINE Expansion N(kgf)
1422 ± 206 (145 ± 21)
Compression N (kgf) 549 ± 108 (56 ± 11)
DIESEL Free height mm (in)
286.7 (11.29)
Load(kg) I.D. Color642.2~674.7
Yellow 2 point
y

Tire wear and tire over or under inflation will increase the indication error.
[MPH]Velocity(MPH) 10
204060
Tolerance (MPH) +1.3
0 +1.7
0 +2.3
0 +3.0
0
Velocity (MPH) 80
100 120 -
Tolerance (MPH) +4.0
0 +5.0
0 +6.0
0 -
[KPH] Velocity(KPH) 20
406080100
Tolerance (KPH) +2.6
0 +2.9
0 +3.5
0 +4.1
0 +5
Velocity (KPH) 120
140160180220
Tolerance (KPH) +6
0 +7
0 +8
0 +9
0 +11
0
TACHOMETER
1. Connect the scan tool to the diagnostic link connector or install a tachometer.
2. With the engine started, compare the readings of the tester with that of the tachometer. Replace the tachometer if
the tolerance is exceeded.
a.Reversing the connections of the tachometer will damage the transistor and diodes inside.
b. When removing or installing the tachometer, be careful not to drop it or subject it to severe shock.
Revolution (rpm) 1,000
2,0003,0004,000Engine
Tolerance (rpm) ±100
±125±150±150Gasoline
±100 ±125±150±150Diesel