2006 KIA Sorento Owner's Manual

Driver Seat Adjustment - Power
(If equipped)
The driver seat can be adjusted by
using the control knob on the outside
of the seat. Before driving, adjust the
seat to the proper position so as to
easily control the steering wheel,
pedals and switches on the instru-
ment panel.
Moving the Front Seat Forward
and Backward
Push the control knob forward or
backward to move the seat to the
desired position. Release the knob
and the seat will lock in that position.KNOWING YOUR VEHICLE3-16
S2BLA340A
CAUTION
Do not operate two knobs at the
same time.
WARNING -
Driver’s Seat
 Never attempt to adjust seat
while the vehicle is moving.
This could result in loss of
control, and an accident caus-
ing death, serious injury, or
property damage.
(Continued)
(Continued)
 In order to avoid unnecessary
airbag injuries including the
possibility of severe injury or
death, always sit as far back
as possible from the steering
wheel while still being able to
maintain comfortable control
of your vehicle.
 The Canadian Motor Vehicle
Safety Standards (CMVSS)
recommends that the driver
sit at least 10 inches (250 mm)
away from the steering wheel
to avoid the risk of serious
injury or death due to the
deployment of the driver’s
airbag.
 The power seats are operable
with the ignition OFF.
Therefore, children should
never be left unattended in the
car.
BL-ENG (CAN)-3.qxd 7/28/05 5:52 PM Page 16

Adjusting the Front Seatback
Recliner
Rotate the upper portion of the con-
trol knob forward or backward to
recline the seatback to the desired
position. Release the control knob
and the seatback will lock in position.Adjusting the Height of Front Seat
Cushion
Front height of front seat cushion
Move the front portion of the control
knob up to raise or down to lower the
front part of the seat cushion.
KNOWING YOUR VEHICLE
3-17
S2BLA340C
S2BLA340B
✽ ✽
NOTICEPrior to operating the vehicle,
ensure the seat is locked securely by
trying to move the seat forward or
backward without using the control
knob. If the seat moves, it is not
locked properly.
BL-ENG (CAN)-3.qxd 7/28/05 5:52 PM Page 17

Rear height of front seat cushion
Move the rear portion of the control
knob up to raise or down to lower the
rear part of the seat cushion.Height of front seat cushion
To raise or lower the seat cushion
totally, pull up and push down on the
center of the corresponding switch.KNOWING YOUR VEHICLE3-18
S2BLA340E
S2BLA340D
WARNING
To minimize the risk of possible
severe personal injury in the
event of a collision, both the dri-
ver's and passenger's seat-
backs should be in a normal
seating position while the car is
in motion. The protection pro-
vided by the vehicle’s restraint
system may be reduced signifi-
cantly when the seatbacks are
reclined. All parts of the
restraint system are designed
to absorb energy in an accident
and this can best be accom-
plished if the seatback is in a
normal seating position and the
seatbelt is in close proximity to
the occupant.
BL-ENG (CAN)-3.qxd 7/28/05 5:52 PM Page 18

Heating the Front Seats
(If equipped)
The front seats can be electrically
heated individually when the ignition
switch is ON. To heat one of the front
seats, depress the corresponding
switch on the center panel. To deac-
tivate the seat heater, press the
switch again.Headrest
All the seat headrests provide com-
fort and also help protect your head
and neck in the event of certain kinds
of collisions.
Hold the headrest and pull up to raise
it. It will lock into position. To lower the
headrest, push the lock lever on the
left side and push down on the head-
rest.
KNOWING YOUR VEHICLE
3-19
AUTO
AUTO AMB
OFF TEMPMODE
AMB
A/C
A/C
L
R
H
M
PASSENGER AIRBAG OFF
5BLC451
S1BLA257Release
lever
✽ ✽
NOTICEThe seat warmer will not operate if
ambient temperature is above
37±3°C (98.5±5.5°F).
BL-ENG (CAN)-3.qxd 7/28/05 5:52 PM Page 19

If your vehicle is equipped with the
headrest swing feature, the front
headrests may be adjusted forward
to four positions by pulling it forward.
To adjust the headrest backwards,
pull it forward and release it.KNOWING YOUR VEHICLE3-20
WARNING
- Headrests
 To reduce the risk of head and
neck injuries, don’t operate
the vehicle with the headrest
removed or improperly posi-
tioned.
 For best protection, adjust the
headrest so its center is as
high as your ears.
 Do not adjust the driver’s
headrest while driving.
BL-ENG (CAN)-3.qxd 7/28/05 5:52 PM Page 20

REAR SEAT
Split Folding Rear Seat
The rear seatbacks fold forward to
provide additional cargo space and to
provide access to the cargo area.
To fold the rear seatback(s) down,
press the lock release button locat-
ed on top of the seatbacks, then fold
the seatback forward and down.
To raise the seatback, lift and push it
firmly until it clicks into place.
When you return the seatback to its
upright position, reposition the rear
safety belts so that they can be used
by rear seat passengers.
KNOWING YOUR VEHICLE
3-21
S2BLB301A
WARNING- Rear Seatback
 The rear seatback must be
securely latched. If not, pas-
sengers and objects could be
thrown forward resulting in
serious injury or death in the
event of a sudden stop or col-
lision.
 Luggage and other cargo
should be laid flat in the cargo
area. If objects are large,
heavy, or must be piled, they
must be secured. Under no
circumstances should cargo
be piled higher than the seat-
backs. Failure to follow these
warnings could result in seri-
ous injury or death in the
event of a sudden stop, colli-
sion or rollover.
(Continued)
(Continued)
 No passenger should ride in
the cargo area or sit or lie on
folded seatbacks while the
vehicle is moving. All passen-
gers must be in seats and
restrained properly while rid-
ing.
 When resetting the seatback
to the upright position, make
sure it is securely latched by
pushing it forward and back-
wards.
 To avoid the possibility of
burns, do not remove the car-
pet in the cargo area.
Emission controls beneath
this floor generate high
exhaust temperatures.
BL-ENG (CAN)-3.qxd 7/28/05 5:52 PM Page 21

To fold the rear seat:
1. Pull up the strap to lift the rear por-
tion of the seat cushion.2. Remove the headrest and put the
headrest poles into the holes on
the rear of the seat cushion.3. Press the lock release button on
the seatbacks, then fold the seat-
back forward and down firmly.KNOWING YOUR VEHICLE3-22
S2BLB301C
S2BLB301D
S2BLB301E
BL-ENG (CAN)-3.qxd 7/28/05 5:52 PM Page 22

To unfold the rear seat:
1. Lift and push the seatback back-
ward firmly until it clicks into place.
2. Replace the headrest on the seat-
back.
3. Push the seat cushion down firmly.
KNOWING YOUR VEHICLE
3-23
S2BLB301G
S1BLB208
CAUTION
When you fold the rear seatback
or put luggage on the rear seat
cushion, you must insert the
buckle into the pocket in the
seatback. Doing so can prevent
the buckle from being crushed
by the rear seatback or luggage.
✽ ✽
NOTICEWhen returning the rear seatbacks
to the upright position, remember
to return the rear shoulder belts to
their proper position. Routing the
safety belt webbing through the
rear safety belt guides will help
keep the belts from being trapped
behind or under the seats.
BL-ENG (CAN)-3.qxd 7/28/05 5:52 PM Page 23