2. Install the rear bearing of drive bevel gear and ad
justing washer
a. Select the proper adjusting washer according to “Meshing Condi
tion of Drive Bevel Gear and Driven Bevel Gear”.
b. Install the rear bearing and selected adjusting washer by press
machine.
3. Install the spacer.
a.Select the adjusting washer between the rear bearing and spacer
based on the experience.
b.Install the spacer.
4. Install the front bearing inner race, oil baffle disc
and oil seal of drive bevel gear
a. Place the front bearing inner race in the reducer housing; place the
oil baffle disc.
b. Coat the position of reducer housing oil seal and lip of oilseal
with grease uniformly; place the oil seal in position. Start the
press machine for installation.
5. Install the drive bevel gear, flange and dustproof
cover assembly
a. Install the flange and dustproof cover assembly in the reducer
housing, Press it to level by hand.
b. Insert the drive bevel gear installed with the spacer, rear bearing
and adjusting washer into the flange through the spline; screw on
the nut.
c. Use the nut to tighten the flange, plain washer and drive gear.
special tools
level
special tools
