2005 NISSAN NAVARA lock

BL-132
REAR DOOR LOCK
Removal and Installation of Rear Door Lock (Double Cab)
EIS00DUO
REMOVAL
1. Remove the rear door finisher. Refer toEI-31, "REAR DOOR - DOUBLE CAB".
2. Fully close the rear door window.
3. Remove the rear door sealing screen.
NOTE:
If searing screen is reused, cut butyl-tape in a way that leaves it on the sealing screen.
4. Remove the inside door handle.
5. Disconnect the door lock and inside door handle cables from the
inside door handle in order of (1) and (2).
CAUTION:
During removal and installation, work so as not to bend the
ends of the inside handle cable.
6. Remove the rear door sealing screen.
1. Grommet 2. Rear door striker 3. Rear door lock assembly
4. Outside door handle cable 5. Inside door handle assembly 6. Inside door handle cable
7. Outside handle bracket 8. Front gasket 9. Outside handle
10. Outside handle escutcheon 11. Rear gasket 12. TORX bolt
MIIB0934E
MIIB0636E

REAR DOOR LOCK
BL-133
C
D
E
F
G
H
J
K
L
MA
B
BL
7. Remove the door side grommet, and remove the outside handle
bracket bolt from grommet hole.
CAUTION:
Do not forcibly remove the TORX bolt.
8. While pulling the outside handle, remove outside handle
escutcheon in order of (1) and (2).
9. While pulling outside handle, slide toward rear of vehicle to
remove the outside handle in order of (1) and (2).
10. Remove the front gasket and rear gasket.
11. Remove the TORX bolts (T30), remove the door lock assembly.: 6.1 N·m (0.63 kg-m, 54.0 in-lb)
MIIB0630E
LIIA1971E
MIIB0632E
MIIB0559E
: 5.8 N·m (0.60 kg-m, 51.4 in-lb)
MIIB0633E

BL-134
REAR DOOR LOCK
12. While pulling outside handle bracket, slide toward rear of vehicle
to remove the outside handle bracket and door lock assembly.
13. Disconnect the door lock actuator connector.
14. Reach in to separate the key cylinder rod and outside handle
cable connection.
INSTALLATION
Note the following, and install in the reverse order of removal.
CAUTION:
lTo install each rod, be sure to rotate the rod holder until a click is felt.
lPlace the outside handle bracket cable on the rear of door lock assembly before installing.
MIIB0634E
PIIB2878J

TAIL GATE
BL-135
C
D
E
F
G
H
J
K
L
MA
B
BL
TAIL GATEPFP:93400
Component Parts LocationEIS00DI7
1. Rear gate striker 2. Rear gate lock assembly 3. Steel washer
4. Plastic washer 5. Rear gate stay assembly 6. Rear gate inner cover
7. Rear gate lock connecting lod (RH) 8. Rear gate lock connecting lod (LH) 9. Lock lod protector
10. Rear gate assembly 11. Rear gate lock cylinder 12. Rear gate finisher assembly
13. Rear gate hinge assembly (RH/LH)
MIIB0927E

BL-136
FUEL FILLER LID OPENER
FUEL FILLER LID OPENER
PFP:78820
Removal and Installation of Fuel Filler LidEIS00BLA
REMOVAL
1. Fully open fuel filler lid.
2. Remove the fuel filler lid mounting screws, and then remove the
fuel filler lid.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
After installing, apply touch-up paint (the body color) onto the head of the mounting screws.
1. Fuel filler lid 2. Fuel filler lid bumper 3. Cylinder lock clip
4. Fuel filler lid key cylinder 5. Fuel filler lid lock striker 6. Fuel cap assembly
MIIB0980E
MIIB0650E

FUEL FILLER LID OPENER
BL-137
C
D
E
F
G
H
J
K
L
MA
B
BL
Removal and Installation of Fuel Lid Lock StrikerEIS00BQ0
REMOVAL
1. Fully open the fuel filler lid.
2. Turn and pull to detach fuel lid lock striker in order of (1) and (2).
INSTALLATION
Install in the reverse order of removal.
MIIB0981E

BL-138
THEFT WARNING SYSTEM
THEFT WARNING SYSTEM
PFP:28590
Component Parts and Harness Connector LocationEIS00DBW
KING CAB
1. Fuse block (J/B) fuse layout 2. Fuse and fusible link box 3. IPDM E/R fuse layout
4. IPDM E/R E17, E18 5. BCM M42, M43, M44
(View with instrument lower panel
LH removed)6. Door lock/unlock switch M52
7. Rear door switch NO.2 (LH) D72 8. Front door switch (Driver side)
D749. Rear door switch NO.1 (LH) D71
MIIB1033E

THEFT WARNING SYSTEM
BL-139
C
D
E
F
G
H
J
K
L
MA
B
BL
DOUBLE CAB
10. Hood switch E51 11. a: Security indicator
b: Combination meter M23
MIIB1034E
1. Fuse block (J/B) fuse layout 2. Fuse and fusible link box 3. IPDM E/R fuse layout
4. IPDM E/R E17, E18 5. BCM M42, M43, M44
(View with Instrument lower panel
LH removed)6. Front door switch (Driver side)
B19
7. Rear door switch (LH) B23 8. Door lock/unlock switch M52 9. Hood switch E51
MIIB1031E