Page 274 of 969
BR3753
F40996
F40995
- BRAKEBRAKE BOOSTER ASSY
32-29
2463 Author: Date:
2005 LEXUS ES330 REPAIR MANUAL (RM1124U)
13. REMOVE BRAKE BOOSTER GASKET
14. INSTALL BRAKE BOOSTER GASKET
(a) Install a new brake booster gasket to the brake booster.
15. INSTALL BRAKE BOOSTER ASSY
(a) Install the brake booster with the 4 nuts.
Torque: 13 NVm (130 kgfVcm, 9 ftVlbf)
16. INSTALL FRONT BRAKE TUBE NO.5
(a) Using SST and install the front brake tube No.5.
Torque: 15 NVm (155 kgfVcm, 11 ftVlbf)
SST 09023-00101
17. INSTALL BRAKE MASTER CYLINDER PUSH ROD CLEVIS
(a) Install the push rod clevis and lock nut.
18. INSTALL PUSH ROD PIN
(a) Install the push rod pin and clip.
HINT:
Apply the lithium soap base glycol grease to the part indicate by arrow (see page 32-27).
19. INSTALL BRAKE PEDAL RETURN SPRING
20. INSTALL INSTRUMENT PANEL INSERT SUB-ASSY LOWER LH (SEE PAGE 71-1 1)
21. INSTALL INSTRUMENT PANEL SUB-ASSY UPPER (SEE PAGE 71-1 1)
22. INSTALL FRONT DOOR SCUFF PLATE LH (SEE PAGE 71-1 1)
23. INSTALL VACUUM HOSE ASSY
(a) Install the vacuum hose and vacuum hose bracket to the
body with a bolt.
Torque: 5.4 NVm (55 kgfVcm, 48 in.Vlbf)
(b) Connect the vacuum hose to the brake booster with the
clip.
24. INSPECT AND ADJUST BRAKE BOOSTER PUSH ROD (SEE PAGE 32-21)
SST 09737-00013, 09737-00020
25. INSTALL BRAKE MASTER CYLINDER SUB-ASSY (SEE PAGE 32-21)
SST 09023-00101
26. FILL RESERVOIR WITH BRAKE FLUID
Page 313 of 969
3305I-02
F41009
F41010
33-6
- PARKING BRAKEPARKING BRAKE CONTROL PEDAL ASSY
2502 Author: Date:
2005 LEXUS ES330 REPAIR MANUAL (RM1124U)
PARKING BRAKE CONTROL PEDAL ASSY
OVERHAUL
HINT:
COMPONENTS: See page 71-8 and 33-3
1. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSY(See page 71-1 1)
2. REMOVE COMBINATION METER ASSY(See page 71-1 1)
3. REMOVE FRONT DOOR SCUFF PLATE LH(See page 71-1 1)
4. REMOVE INSTRUMENT PANEL SUB-ASSY UPPER(See page 71-1 1)
5. REMOVE INSTRUMENT PANEL INSERT SUB-ASSY LOWER LH(See page 71-1 1)
6. REMOVE PARKING BRAKE CONTROL PEDAL ASSY
(a) Disconnect the parking brake switch connector.
(b) Remove the 2 bolts, nut and parking brake control pedal
assy.
7. DISCONNECT PARKING BRAKE CABLE ASSY NO.1
(a) Remove the lock nut, adjusting nut and clip, then discon-
nect the parking brake cable assy No.1 from the parking
brake control pedal assy.
8. REMOVE PARKING BRAKE SWITCH ASSY
(a) Remove the screw and parking brake switch assy.
9. REMOVE TENSION SPRING
10. REMOVE RETURN SPRING DAMPER
11. REMOVE PARKING PEDAL PAD
Page 314 of 969
F41010
F41009
- PARKING BRAKEPARKING BRAKE CONTROL PEDAL ASSY
33-7
2503 Author: Date:
2005 LEXUS ES330 REPAIR MANUAL (RM1124U)
12. INSTALL PARKING PEDAL PAD
13. INSTALL RETURN SPRING DAMPER
14. INSTALL TENSION SPRING
15. INSTALL PARKING BRAKE SWITCH ASSY
(a) Install the parking brake switch assy with the screw.
16. CONNECT PARKING BRAKE CABLE ASSY NO.1
(a) Connect the parking brake cable assy No.1 with the clip,
adjusting nut and lock nut.
17. INSTALL PARKING BRAKE CONTROL PEDAL ASSY
(a) Install the parking brake control pedal assy with the 2
bolts and nut.
Torque: 39 NVm (398 kgfVcm, 29 ftVlbf)
(b) Connect the parking brake switch connector.
18. INSTALL INSTRUMENT PANEL INSERT SUB-ASSY LOWER LH
19. INSTALL INSTRUMENT PANEL SUB-ASSY UPPER
20. INSTALL FRONT DOOR SCUFF PLATE LH
21. INSTALL COMBINATION METER ASSY
22. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSY
23. INSPECT AND ADJUST PARKING BRAKE PEDAL TRAVEL(See page 33-2)
Page 315 of 969
3305J-02
C90470
Turn
Buckle
F41010
33-8
- PARKING BRAKEPARKING BRAKE CABLE ASSY NO.1
2504 Author: Date:
2005 LEXUS ES330 REPAIR MANUAL (RM1124U)
PARKING BRAKE CABLE ASSY NO.1
REPLACEMENT
HINT:
COMPONENTS: See page 71-8 and 33-3
1. REMOVE FRONT DOOR SCUFF PLATE RH
2. REMOVE FRONT DOOR SCUFF PLATE LH
3. REMOVE INSTRUMENT PANEL SUB-ASSY UPPER(See page 71-1 1)
4. REMOVE INSTRUMENT PANEL INSERT SUB-ASSY LOWER LH(See page 71-1 1)
5. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSY NO.1(See page 71-1 1)
6. REMOVE INSTRUMENT PANEL SUB-ASSY LOWER(See page 71-1 1)
7. REMOVE CONSOLE PANEL UPPER REAR(See page 71-1 1)
8. REMOVE CONSOLE BOX CARPET
9. REMOVE RR CONSOLE BOX(See page 71-1 1)
10. REMOVE INSTRUMENT PANEL FINISH PANEL END RH
11. REMOVE INSTRUMENT PANEL FINISH PANEL END LH(See page 71-1 1)
12. REMOVE AIR DUCT REAR NO.1
13. REMOVE AIR DUCT REAR NO.2
14. REMOVE CONSOLE BOX DUCT NO.1
15. REMOVE YAWRATE SENSOR (W/ VSC)(See page 32-59)
16. REMOVE PARKING BRAKE CABLE ASSY NO.1
(a) Loosen the turn buckle, disconnect the parking brake
cable assy No.1 from the parking brake cable assy No.4.
(b) Remove the 2 bolts and console box mounting bracket
No.2.
(c) Remove the lock nut, adjusting nut and clip, then discon-
nect the parking brake cable assy No.1 from the parking
brake control pedal assy.
Page 332 of 969
3305I-02
F41009
F41010
33-6
- PARKING BRAKEPARKING BRAKE CONTROL PEDAL ASSY
2502 Author: Date:
2005 LEXUS ES330 REPAIR MANUAL (RM1124U)
PARKING BRAKE CONTROL PEDAL ASSY
OVERHAUL
HINT:
COMPONENTS: See page 71-8 and 33-3
1. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSY(See page 71-1 1)
2. REMOVE COMBINATION METER ASSY(See page 71-1 1)
3. REMOVE FRONT DOOR SCUFF PLATE LH(See page 71-1 1)
4. REMOVE INSTRUMENT PANEL SUB-ASSY UPPER(See page 71-1 1)
5. REMOVE INSTRUMENT PANEL INSERT SUB-ASSY LOWER LH(See page 71-1 1)
6. REMOVE PARKING BRAKE CONTROL PEDAL ASSY
(a) Disconnect the parking brake switch connector.
(b) Remove the 2 bolts, nut and parking brake control pedal
assy.
7. DISCONNECT PARKING BRAKE CABLE ASSY NO.1
(a) Remove the lock nut, adjusting nut and clip, then discon-
nect the parking brake cable assy No.1 from the parking
brake control pedal assy.
8. REMOVE PARKING BRAKE SWITCH ASSY
(a) Remove the screw and parking brake switch assy.
9. REMOVE TENSION SPRING
10. REMOVE RETURN SPRING DAMPER
11. REMOVE PARKING PEDAL PAD
Page 333 of 969
F41010
F41009
- PARKING BRAKEPARKING BRAKE CONTROL PEDAL ASSY
33-7
2503 Author: Date:
2005 LEXUS ES330 REPAIR MANUAL (RM1124U)
12. INSTALL PARKING PEDAL PAD
13. INSTALL RETURN SPRING DAMPER
14. INSTALL TENSION SPRING
15. INSTALL PARKING BRAKE SWITCH ASSY
(a) Install the parking brake switch assy with the screw.
16. CONNECT PARKING BRAKE CABLE ASSY NO.1
(a) Connect the parking brake cable assy No.1 with the clip,
adjusting nut and lock nut.
17. INSTALL PARKING BRAKE CONTROL PEDAL ASSY
(a) Install the parking brake control pedal assy with the 2
bolts and nut.
Torque: 39 NVm (398 kgfVcm, 29 ftVlbf)
(b) Connect the parking brake switch connector.
18. INSTALL INSTRUMENT PANEL INSERT SUB-ASSY LOWER LH
19. INSTALL INSTRUMENT PANEL SUB-ASSY UPPER
20. INSTALL FRONT DOOR SCUFF PLATE LH
21. INSTALL COMBINATION METER ASSY
22. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSY
23. INSPECT AND ADJUST PARKING BRAKE PEDAL TRAVEL(See page 33-2)
Page 334 of 969
3305J-02
C90470
Turn
Buckle
F41010
33-8
- PARKING BRAKEPARKING BRAKE CABLE ASSY NO.1
2504 Author: Date:
2005 LEXUS ES330 REPAIR MANUAL (RM1124U)
PARKING BRAKE CABLE ASSY NO.1
REPLACEMENT
HINT:
COMPONENTS: See page 71-8 and 33-3
1. REMOVE FRONT DOOR SCUFF PLATE RH
2. REMOVE FRONT DOOR SCUFF PLATE LH
3. REMOVE INSTRUMENT PANEL SUB-ASSY UPPER(See page 71-1 1)
4. REMOVE INSTRUMENT PANEL INSERT SUB-ASSY LOWER LH(See page 71-1 1)
5. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSY NO.1(See page 71-1 1)
6. REMOVE INSTRUMENT PANEL SUB-ASSY LOWER(See page 71-1 1)
7. REMOVE CONSOLE PANEL UPPER REAR(See page 71-1 1)
8. REMOVE CONSOLE BOX CARPET
9. REMOVE RR CONSOLE BOX(See page 71-1 1)
10. REMOVE INSTRUMENT PANEL FINISH PANEL END RH
11. REMOVE INSTRUMENT PANEL FINISH PANEL END LH(See page 71-1 1)
12. REMOVE AIR DUCT REAR NO.1
13. REMOVE AIR DUCT REAR NO.2
14. REMOVE CONSOLE BOX DUCT NO.1
15. REMOVE YAWRATE SENSOR (W/ VSC)(See page 32-59)
16. REMOVE PARKING BRAKE CABLE ASSY NO.1
(a) Loosen the turn buckle, disconnect the parking brake
cable assy No.1 from the parking brake cable assy No.4.
(b) Remove the 2 bolts and console box mounting bracket
No.2.
(c) Remove the lock nut, adjusting nut and clip, then discon-
nect the parking brake cable assy No.1 from the parking
brake control pedal assy.
Page 406 of 969
A60073
A59893
14-30
- ENGINE MECHANICALPARTIAL ENGINE ASSY (3MZ-FE)
2122 Author: Date:
2005 LEXUS ES330 REPAIR MANUAL (RM1124U)
37. DISCONNECT STEERING GEAR OUTLET RETURN
TUBE
38. REMOVE GLOVE COMPARTMENT DOOR ASSY (See page 10-22)
39. SEPARATE ENGINE WIRE
(a) Disconnect the engine wire harness from the ECM and
junction block.
(b) Disconnect the engine wire harness from the engine room
junction block.
(1) Remove the nut, then separate the engine wire har-
ness.
(2) Using a screwdriver, release the engine room junc-
tion block. Separate the engine wire harness by
pulling it upward.
(c) Remove the 2 nuts, then pull out the engine wire harness.
(d) Remove the body ground.
40. REMOVE EXHAUST PIPE NO.1 SUPPORT BRACKET FRONT (See page 15-2)
41. REMOVE EXHAUST PIPE NO.1 SUPPORT BRACKET REAR (See page 15-2)
42. REMOVE EXHAUST PIPE ASSY FRONT (See page 15-2)
43. DISCONNECT FRONT STABILIZER LINK ASSY LH (See page 30-8)
44. DISCONNECT FRONT STABILIZER LINK ASSY RH
HINT:
Perform the same procedure as above on the opposite side.
45. REMOVE FRONT AXLE HUB LH NUT (See page 30-8)
SST 09930-00010
46. REMOVE FRONT AXLE HUB RH NUT
SST 09930-00010
HINT:
Perform the same procedure as above on the opposite side.
47. SEPARATE SPEED SENSOR FRONT LH (See page 30-8)
48. SEPARATE SPEED SENSOR FRONT RH
HINT:
Perform the same procedure as above on the opposite side.
49. SEPARATE TIE ROD ASSY LH (See page 30-8)
SST 09628-6201 1
50. SEPARATE TIE ROD ASSY RH
SST 09628-6201 1
HINT:
Perform the same procedure as above on the opposite side.
