Lexus Supports ASE CertificationPage 1 of 2
Title:
WHEEL FILM FOR BRAKE ROTOR
RUST PREVENTION
Models:
All Models with Wheel Film
Technical Service
Information Bulletin
July 16, 2004
PD001-04
To prevent brake rotor rust from forming during transportation and storage, wheel film will
be adopted instead of using a cardboard type anti±rust cover.
The purpose of the wheel film is to protect the disc brake rotor from weather elements
and initial rust before the vehicle is delivered to the customer. Consequently, the film
should remain on the wheel as long as possible.
NOTE:
Retain the wheel film on the disc wheel during vehicle display and storage.
Do not remove the wheel film right away at Pre±Delivery Service (PDS) if the vehicle
will be stored after PDS.
Remove the wheel film just prior to delivery to customers.
Wheel FilmFeatures of Wheel Film:
Material: Polyethylene
Color: Transparent
All Models with wheel film.
OP CODEDESCRIPTIONTIMEOFPT1T2
N/ANot Applicable to Warranty±±±±
PRE±DELIVERY SERVICE
Introduction
Applicable
Vehicles
Warranty
Information
28009-17
R03031
F13676
Front (A) (B)
C80976
- TIRE & WHEELWHEEL AND TIRE SYSTEM
28-1
2402 Author: Date:
2005 LEXUS ES330 REPAIR MANUAL (RM1124U)
WHEEL AND TIRE SYSTEM
INSPECTION
1. INSPECT TIRE
(a) Check the tires for wear and proper inflation pressure.
Cold tire inflation pressure:
Tire sizeFront, Rear
kPa (kgf/cm2, psi)
P215/60R16 94V200 (2.0, 29)
P215/55R17 93V210 (2.1, 30)
(b) Using a dial indicator, check the tire runout.
Tire runout: 1.0 mm (0.039 in.) or less
2. ROTATE TIRES
HINT:
Rotate tires as shown in illustration (A) if a spare tire is not
included in the rotation.
Rotate tires as shown in illuatration (B) if a spare tire is in-
cluded in the rotation.
3. INSPECT WHEEL BALANCE
(a) Check and adjust the Off-the-car balance.
(b) If necessary, check and adjust the On-the-car balance.
Imbalance after adjustment: 8.0 g (0.018 lb) or less
4. INSPECT BEARING LOOSENESS (SEE PAGE 30-2)
5. INSPECT AXLE HUB RUNOUT (SEE PAGE 30-2)