2004 NISSAN 350Z key

SETTING WITH THE
Point of Interest (POI)KEY
The keys in Point of Interest (POI) are List, Cat-
egory , State/Province, City and Nearby , and
they are explained below.
1. First press the DEST button.
2. Select the
Point of Interest (POI) key on
the [DEST . SETTING (POI)] screen.
SETTING WITH THEListKEY
TheList key is used when you know the ex-
act names of the destinations and waypoints.
1. Input the facility name for your destination,
then select the
List key .NOTE:
For a speedier search, input the
state/province, city and category before
searching for your desired destination.
INFO:
If the system detects that the number of cor-
responding facilities or cities is five or less, the
display shows the list screen automatically .
2. The display shows the screen to select a fa-
cility or
Info key .
INV1521
INV1583
INV1584
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
6-2

When theNext Search key is selected, it is
possible to narrow down categories,
states/provinces and cities.
T o use this function, refer to “Setting with the
Category key”, “Setting with theState key”
and “Setting with the
City key” on pages 6-4,
6-7 and 6-9.3. When a facility name is selected, the display
shows the [DEST . SETTINGS (POI)] screen
to set the destination.
T o set priorities, select the
OK key . Then,
the route calculation will be started.
When you alter the destination or set
waypoints, select the
Waypoint key .
Please refer to “Making the system guide
the route with detailed options” on page
5-27.
When the
Info key next to the facility
name of your choice is selected in step 2,
the display shows the detailed [Address]
and [T elephone number] of the selected fa-
cility , and the
Map andEnter keys.
INV1585INV1586INV1587
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
6-3

When setting the facility as the destination,
select the
Enter key . The display shows
the [DEST . SETTING (POI)] screen to set
the destination.
Set priorities and select the
OK key .
Then, the route calculation will be started.
When you alter the destination or set
waypoints, select the
Waypoint key .
Please refer to “Making the system guide
the route with detailed options” on page
5-27.
When the
Map key is selected, the dis-
play shows the map. When the PUSH EN-
TER button is pressed, the display shows
the
Destination key .
SETTING WITH THECategory
KEY
TheCategory key is used when you select a
facility category to set the destination.
1. Select the
Category key .
INV1586INV1589INV1590
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
6-4

2. The display shows the screen to select cat-
egories.
Input a category name.INFO:
When the
Last 5 Categories key is selected
in step 2, the previous five settings will be
listed.3. The display shows the category list.
Select a category name.
INFO:
When the
REST AURANT key is selected, the
screen to input the cuisine type will be dis-
played.
INV1591INV1592INV1593
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
6-5

4. The screen returns to the [DEST . SETTINGS
(POI)] screen.
When the category is set, the display shows
the selected category beside the
Category key .
Input the facility name.
INFO:

If you do not know the facility name you
want to go to, select the
List key so that
the facility names in the category will be
listed in alphabetical order .
It may take some time to show the list, de-
pending on categories.
5. When a facility name is input, the system
retrieves the facility name according to the
selected category and the input letters.
Then, the display shows the screen to select
a facility and
Info key .
Please refer to “Setting with the
List key”
on page 6-2.When the
Next Search key is selected, it is
possible to narrow down states/provinces and
cities within the selected category .
T o use this function, refer to “Setting with the
State key” and “Setting with theCity key”
on pages 6-7 and 6-9.
INV1594
INV1595
INV1596
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
6-6

SETTING WITH THEStateKEY
TheState key is used when you select a
state/province to set the destination.
1. Select the
State key .2. The display shows the screen to select
states/provinces.
Input a state/province name.INFO:
When the
Last 5 States key is selected in
step 2, the previous five settings will be listed.
INV1597INV1598INV1599
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
6-7

3. The display shows the state/province list.
Select a state/province name.4. The screen returns to the [DEST . SETTINGS
(POI)] screen.
When the state/province is set, the display
shows the selected state/province next to
the
State key .
Input the facility name.
INFO:
If you do not know the facility name, select the
Category key to retrieve a facility . When the
facility is set from the
Category key , the dis-play shows the selected facility beside the
Category key .
5. When a facility name is input, the system
retrieves the facility according to the se-
lected state/province and the input letters.
Then, the display shows the screen to select
a facility and
Info key .
Please refer to “Setting with the
List key”
on page 6-2.
INV1600INV1601
INV1602
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
6-8

When theNext Search key is selected, it is
possible to narrow down categories and cities
within the selected state/province.
T o use this function, refer to “Setting with the
Category key” and “Setting with theCity
key” on pages 6-4 and 6-9.
SETTING WITH THECityKEY
TheCity key is used to retrieve a facility from
the specified city to set the destination.
1. Select the
City key .

The display shows the screen to select cit-
ies.2. Input a city name.
INV1603INV1604INV1605
INV1606
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
6-9