2004 NISSAN 350Z reset

Please refer to “Requesting the simulation
drive to the destination” on page 11-11.
Edit Routekey:
Resets the set destination (waypoint).
Please refer to “Making the system guide the
route with detailed options” on page 5-27.
Easy Mode — when the
Short Menuskey is selected
Helpkey:
Y ou can see the explanation of the navigation
functions.
Quick Stopkey:
Same as in Expert Mode.
Where am I?key:
Same as in Expert Mode.
Keys that appear when the map
is scrolled with the joystick
Y ou can scroll the map display and get infor-
mation about the area near your vehicle and the
destination using the joystick.
INFO:

This function can be used when the original
map disc is inserted.

Y ou can operate this with the map display
on.

This function cannot be used when the sys-
tem is calculating the route or drawing the
screen.
Store Placekey:
Y ou can store the location with the cross
pointer .
Please refer to “Storing current vehicle posi-
tion” on page 7-3.
Destination #key:
Y ou can set the position as a destination, using
the cross pointer . The maximum number of
destinations is six, and the last one stored will
be the final destination. (# will appear on the
map to denote the selected locations from 1 toINV1456
INV1457
HOW DO I OPERATE THE NISSAN NAVIGATION SYSTEM?
4-14

route calculation when the vehicle is closer
to the main road.
— If there is no main road within 3.1 miles (5
km) from the destination or waypoint, a
message saying so will appear on the
screen. T ry setting the location closer to the
main road.
— If the vehicle is too close to the destination
or if there are no branches of the roads to
the destination. A message saying so will
appear on the screen.
— If it is deemed impossible to reach the des-
tination or waypoints because of traffic
regulations, etc.
— If the only route to reach the destination or
waypoints is extremely complicated.
— If the destination, current vehicle position
or waypoint is within the avoid area.
— If the setting of avoid areas covers the
routes to the destination, route calculationmay not be possible.

The following may occur when the route is
being displayed.
— If you are requesting a calculation from the
main road, the origin of the route may not
exactly match the current vehicle position.
— If you are requesting a calculation to the
destination on the main road, the end of the
route may not exactly match the destination.
— If you are requesting a calculation from the
main road, the system may show a route
from another main road. This may be be-
cause the icon to show the current vehicle
position (vehicle icon) is not set accurately .
In that case, park the car in a safe place and
reset the vehicle icon, or continue driving
to see if the vehicle icon appears on the
main road before requesting route calcula-
tion again.
— There are cases in which the system shows
a detoured route to reach the destination orwaypoints, if you set them from memory or
facility information. In order to correct this,
you will have to be careful about the traffic
direction, especially when the lanes with
different travel directions are shown sepa-
rately . Such places are interchanges and
service areas.
— This system makes no distinction between
limited traffic control and total control
(blockage). It may show a detoured route
even if the road is usable.
— Even if the freeway preference is set to OFF ,
the route may be set on them. T o avoid this,
set a waypoint on another road type and re-
quest calculation.
— Even if the preference is set to OFF for a
ferry line, the route may be set on it. T o
avoid this, set a waypoint on a road and re-
quest calculation.
— Ferry lines, except those which accept only
pedestrians, bicycles and motorcycles, are
HOW DO I OPERATE THE NISSAN NAVIGATION SYSTEM?
4-22

5 HOW DO I PROGRAM A DESTINATION?
Various wa ys to set the destina tion (or
wa ypoint) ..................................................... 5-2
Expert mode ca tegories ......................... 5-2
Easy mode ca tegories ............................ 5-2
Setting with the
Address Bookkey ... 5-3
Setting with the
Previous Dest.key ... 5-5
Setting with the
Address/Streetkey ... 5-6
Setting with the
Intersectionkey ...... 5-12
Setting with the
Point of Interest (POI)key ........................................................ 5-18
Setting with the
Citykey .................. 5-18
Setting with the
Phone Numberkey ........................................................ 5-22
Setting with the
Mapkey ................ 5-24Setting with the
Countrykey .......... 5-25
Setting with the
Homekey ............... 5-26
Having the system guide you to the
destina tions ............................................... 5-27
Making the system guide the route with
det ailed options .................................... 5-27
Adjusting and deleting the preset destina tion
(wa ypoints)................................................ 5-32
T o delete a destination......................... 5-34
All clear ...................................................... 5-35
Quick stop.................................................. 5-36
Quick stop customer setting ................ 5-37
Where am I? .............................................. 5-39

Route calculation and guidance
After setting all the items required, you may
proceed to route calculation for guidance. After
the route calculation is completed, the guid-
ance will start automatically .
INFO:
When the ROUTE button is pressed on the
map and the
Edit Route key is selected, the
[EDIT ROUTE] screen will be displayed.
Select the
Route calc. key .Route calculation screen will be displayed.
The suggested route will be displayed with a
thick blue line. If you enter this route, the voice
guide will start.
INFO:

If you want to cancel the route calculation,
press the CANCEL button.

If you set a place which is not suitable as
a destination, the suggested route will not
be displayed. In such a case, theOK key
will be displayed on the screen. Select the
OK key . Reset a correct destination.

If route calculation is not possible with all
the set preferences, the system may look up
a route that does not exactly correspond to
the preferences.

When deleting the settings of destinations
or waypoints, press the ROUTE button.
Enlarged intersection display
When the vehicle approaches a guide point
such as an intersection, the enlarged map of
the point will be displayed.
INV1555
INV1556
INV1557
HOW DO I PROGRAM A DESTINATION?
5-31

INFO:

When no operation is executed with the en-
larged map displayed, the map stays dis-
played.

If route numbers are included in the map
data, route numbers will be displayed on
the left side of the screen.

If street names are displayed in two lines,
route numbers will not be displayed.
NOTE:

When the guide point is close to theguidance start point, the enlarged
map may not be displayed.

The guide point name may not be dis-
played.

The position of the vehicle icon on the
enlarged map may differ from the po-
sition on the current display .
1. Press the MAP or PREVIOUS button.
The map screen will appear .INFO:
T o display the enlarged map, press the MAP
button or PREVIOUS button.
2. When the vehicle arrives at the neighbor-
hood of the destination, the route guidance
will end automatically .
INFO:

T o alternate between the map and the en-
larged screen, press the MAP button or
PREVIOUS button.

In the map screen, the distance to the next
guide point and the turning direction will be
displayed on the right side of the screen.
ADJUSTING AND DELETING
THE PRESET DESTINA TION
(W A YPOINTS)
Using the joystick, you canadjust the des-
tination(waypoints).
1. Press the ROUTE button.
INV1558
INV1559
HOW DO I PROGRAM A DESTINATION?
5-32

TO DELETE A DESTINATION
1. T o delete the destination (waypoint),
choose the destination (waypoint) in step 3
and select the
Delete key .2. Select the
Y es key .
The preset destination (waypoints) will be de-
leted.3. Press the Map button to return to the map
screen.
INFO:

T o set a new destination (waypoints), refer
to “Expert mode categories” or “Easy mode
categories” on page 5-2.

If you reset the new destination (waypoints),
the older destination (waypoints) will be de-
leted. If you have requested a route calcu-
lation, the previous suggested route will be
deleted from memory .
INV1564INV1565INV1566
HOW DO I PROGRAM A DESTINATION?
5-34

INFO:

When optional routes are not found, the
original route will be displayed.

When the vehicle runs off the suggested
route with the automatic rerouting function
activated, route recalculation will be at-
tempted so that the vehicle returns to the
original route. However , if the vehicle stays
off the route, the system will calculate a new
route.
DETOURING FROM THE
ROUTE TEMPORARIL Y
If you encounter a traffic jam, you can ask the
system to calculate a detour with the preset dis-
tance.
NOTE:
The detour feature is only available
when a destination has been set.
1. Press the ROUTE button.2. Select the
Edit Route key .
3. Select the
Detour key .4. Set the distance for detour calculation.
The system will look for a detour according to
the distance set from the current location.
INFO:

When the
Avoid the Current Street key
is selected, a detour route to approximately
20 miles (30 km) will be calculated if the
distance to the next guide point intersection
exceeds 20 miles (30 km).

If an alternative route cannot be found, the
INV1681
INV1682
INV1683
HOW DO I USE THE AUTOMATIC REROUTING FEATURE?
9-3

3. Select theT racking On/Off key .
4. Select the
On key .5. Press the MAP button.
The location of the vehicle will be displayed.
INFO:

Y ou can select the
On key to display the
indication marks (), and the
Off key to
stop displaying them.

The indication marks () may be spaced
differently , according to the scale of the
map.

If you reset the current vehicle location, theindication marks () will be cleared.
GPS INFORMA TION DIS-
PLA Y
The following GPS information will be dis-
played on the screen: latitude, longitude, alti-
tude, signal reception, and satellite locations.
1. Press the SETTING button.
2. Select the
Navigation key on the [SET -
TINGS] screen.
INV1716
INV1717
INV1718
INV1466
HOW DO I ADJUST THE DISPLAY?
11-13