MAINTENANCE INFORMA-
TION
1. Press the INFO button.
2. The [MAINTENANCE INFO.] screen will be
displayed.
3. T o set the maintenance information for the
Engine Oil or Oil Filter , choose an item us-
ing the joystick and press the PUSH ENTER
button.4. The [ENGINE OIL] screen will be displayed.
5. T o reset, select the
RESET key .
6. Set the distance of the maintenance sched-
ule.
T o determine the maintenance interval, refer to
the vehicle’s Owner’s Manual.
T o automatically display the [MAINTENANCE
INFO.] screen when setting trip distance is
reached, select the
Display Maintenance Notification key and
press the PUSH ENTER button.
INV1756
INV1750
HOW DO I USE THE VEHICLE INFORMATION?
12-2
ROUTE CALCULA TION
Symptom Possible cause Remedy
Although the system is set with the moving di-
rection as the preference, it does not find the
route by matching the preference.There is no route found in that direction. This condition is not abnormal.
Route is not indicated. There is no road that can be found by this sys-
tem close to the destination.Reset the destination closer to the road dis-
played in orange. Especially with roads which
have separate lanes for opposite directions, be
careful in setting the destination or waypoints
on it, because results may differ depending on
the lane you choose.
The starting point to the destination is too
close.Set more distant destinations.
The present location is about 1,100 miles
(1,770 km) away from the destination.Set the destination to within 1,100 miles (1,770
km).
The route is not displayed continuously at
waypoints, for example, that are not calculated
route from the vehicle’s current position.Suggested routes may be displayed discontinu-
ously near waypoints as route calculation is
done at each waypoint.This condition is not abnormal.
The suggested route the vehicle has traveled
is erased.Suggested routes are stored in memory by the
blocks; if the vehicle travels past waypoint
block 1, the previous data will be erased.This condition is not abnormal.
TROUBLESHOOTING GUIDE
14-9