2004 MITSUBISHI L200 headlamp

Overview -Instruments and ControlsEB21APDd
1 - Headlamp washer switch*→p. 4-17
2 - Combination headlamps, dipper and turn signal
switch→p. 4-12
3 - Rear differential lock switch*→p. 5-23
4 - Meters and gauges→p. 4-2
5 - Windscreen wiper and washer switch→p. 4-15
6 - Rear fog lamp switch* (except*
1)→p. 4-19
Electric remote-controlled outside rear-view
mirrors*→p. 5-38
7 - Rheostat*→p. 4-20
Rear fog lamp switch*
1→p. 4-19
8 - Supplemental restraint system-air bag
(for driver's seat)*→p. 3-20
Horn switch→p. 4-20
9 - Bonnet release lever→p. 2-7
10 - Ignition switch→p. 5-9
11 - Headlamp levelling switch*→p. 4-14
NOTE: *1- Vehicle with electric remote-controlled outside rear-view mirrors as
optional equipment only
B21A627
1234 5
67
8 9 10 11
LHD
01engL2_240082_4 22-01-2004 12:58 Page 1-2

Instruments and Controls
1 - Windscreen wiper and washer switch→p. 4-15
2 - Meters and gauges→p. 4-2
3 - Rear differential lock switch*→p. 5-23
4 - Combination headlamp, dipper and turn signal
switch→p. 4-12
5 - Headlamp washer switch*→p. 4-17
6 - Headlamp levelling switch*→p. 4-14
7 - Ignition switch→p. 5-9
8 - Bonnet release lever→p. 2-7
9 - Supplemental restraint system-air bag
(for driver's seat)*→p. 3-20
Horn switch→p. 4-20
10 - Rheostat*→p. 4-20
Rear fog lamp switch*
1→p. 4-19
11 - Rear fog lamp switch (except*1)→p. 4-19
Electric remote-controlled outside rear-view
mirrors*→p. 5-38
NOTE: *1- Vehicle with electric remote-controlled outside rear-view mirrors as
optional equipment only
B21A624
12 3
45
678910 11
RHD
01engL2_240082_4 22-01-2004 12:58 Page 1-4

1 - Rear gate →p. 2-12
2 - High-mounted stop lamp* →p. 8-34, 8-38
3 - Electric window control* →p. 2-9
4 - Engine compartment →p. 10-25
5 - Bonnet →p. 2-7
6 - Windscreen wiper and washer →p. 4-15
7 - Antenna →p. 6-18
8 - Door mirrors →p. 5-37
9 - Locking and unlocking →p. 2-4
Keyless entry system* →p. 2-5
10 - Fuel filler →p. 5-3
11 - Rear fog lamp (Driver’s side only)*
→p. 4-19, 8-34, 8-38
12 - Number-plate lamps →p. 4-12, 8-34, 8-37
13 - Stop and tail lamps →p. 8-34, 8-37
14 - Reversing lamps →p. 8-34, 8-37
15 - Rear turn-signal lamps →p. 4-13, 8-34, 8-37
16 - Headlamps →p. 4-12, 8-35
17 - Front turn-signal lamps →p. 4-13, 8-34, 8-36
18 - Position lamps →p. 4-12, 8-34, 8-36
19 - Tyre chains →p. 9-13
Tyre rotation →p. 9-11
Changing tyres →p. 8-16
Tyre inflation pressure →p. 9-11
20 - Side turn-signal lamps →p. 4-13, 8-34, 8-36
A- Single Cab
B- Club Cab
B21A342
Exterior (Single cab, Club cab)EB21DPDf
A02A279
1
A
B 2
34
5678910
12
34
5678910 11 12 11 13 14 15 16 17 18 19 20
11 12 13 14 15 16 17 18 19 20
01engL2_240082_4 22-01-2004 12:58 Page 1-12

1 - Rear gate →p. 2-12
2 - High-mounted stop lamp* →p. 8-34, 8-38
3 - Electric window control* →p. 2-9
4 - Engine compartment →p. 10-25
5 - Bonnet →p. 2-7
6 - Windscreen wiper and washer →p. 4-15
7 - Antenna →p. 6-18
8 - Door mirrors →p. 5-37
9 - Locking and unlocking →p. 2-4
Keyless entry system* →p. 2-5
10 - Fuel filler →p. 5-3
11 - Rear fog lamp (Driver’s side only)*
→p. 4-19, 8-34, 8-38
12 - Number-plate lamps →p. 4-12, 8-34, 8-37
13 - Stop and tail lamps →p. 8-34, 8-37
14 - Reversing lamps →p. 8-34, 8-37
15 - Rear turn-signal lamps →p. 4-13, 8-34, 8-37
16 - Headlamps →p. 4-12, 8-35
17 - Front turn-signal lamps →p. 4-13, 8-34, 8-36
18 - Position lamps →p. 4-12, 8-34, 8-36
19 - Tyre chains →p. 9-13
Tyre rotation →p. 9-11
Changing tyres →p. 8-16
Tyre inflation pressure →p. 9-11
20 - Side turn-signal lamps →p. 4-13, 8-34, 8-36
B21A344
Exterior (Double cab)
A02A280
1
11 12 11 13 14 15 16 17 18 19 20236789104
5
01engL2_240082_4 22-01-2004 12:58 Page 1-13

Instruments .................................................. 4-2
Speedometer ................................................ 4-2
Odometer/Tripmeter .................................... 4-3
Tachometer................................................... 4-3
Fuel gauge .................................................... 4-3
Water temperature gauge............................ 4-4
Inclinometer* ................................................ 4-4
Thermometer*............................................... 4-5
Volt meter* .................................................... 4-5
Indication and warning lamps .................... 4-6
Combination headlamps, dipper and turn
signal switch .......................................... 4-12
Headlamp levelling switch* ......................... 4-14
Windscreen wiper and washer switch ....... 4-15
Headlamp washer switch* ........................... 4-17
Hazard warning flasher switch ................... 4-18
Rear window demister switch* ................... 4-18
Rear fog lamp switch* ................................. 4-19
Rheostat (meter illumination control)* ....... 4-20
Horn switch .................................................. 4-20
Room lamps ................................................. 4-20
Instruments and controls
4
04engL2_240082_4 22-01-2004 13:19 Page 4-1

INSTRUMENTS AND CONTROLS
4-12
Combination headlamps,
dipper and turn signal
switch
EE11AAMb
Headlamps
Rotate the switch to turn on the lamps.
- All lamps off
- Position, tail, licence-plate, and in-
strument panel lamps on
- Headlamps on and other lamps go
on
NOTE
[Vehicles with Dim Dip]
When the ignition key is in the “ON” posi-
tion and the lamp switch is set to the
“ ” position, the low beam of the head-
lamp will illuminate dimly.
Dipper (High/Low beam change)
EE11B-Dd
When the lamp switch is in the “ ” posi-
tion, the beam changes from high to low
(or low to high) each time the lever is
pulled to (1). While the high beam is on,
the high beam indication lamp in the in-
strument cluster will also illuminate.
[Vehicles with Daytime Running Lamp]
When the ignition key is in the “ON” posi-
tion and the lamp switch is set to the “ ”
position, the low beam of the headlamps,
tail lamps, etc., will illuminate.
Lamp monitor system
If the driver’s door is opened when the key
is in the “LOCK” or “ACC” position or re-
moved from the ignition switch with the
lamp switch in the “ ” or “ ” position,
a buzzer will sound to remind the driver to
turn off the lamps.
Turn of the lamp switch, and the buzzer
will stop.
NOTE
(1) Do not leave the headlamps and
other lamps on for too long while the
engine is stationary. A run-down bat-
tery could result.
(2) When it rains, or when the vehicle has
been washed, the inside of the lens
sometimes becomes foggy. This is the
same phenomenon as when window
glass mists up on a humid day, and
does not indicate a functional prob-
lem. When the lamp is switched on,
the heat will remove the fog. However,
if water gathers inside the lamp,
please go to an authorized MIT-
SUBISHI dealer for a check.
E11A015E11C013
12
04engL2_240082_4 22-01-2004 13:20 Page 4-12

INSTRUMENTS AND CONTROLS
4-13 Headlamp flasher
EE11C-Fb
The headlamps flash when the lever is
pulled slightly to (2), and will go off when it
is released.
When the high beam is on, the high beam
indication lamp in the instrument cluster
will also illuminate.
NOTE
The headlamps can also flash when the
lamp switch is OFF.
Turn/lane-change signalsEE11D-Ag
The turn-signal lamps flash when the
switch is operated (with the ignition switch
“ON”). At the same time, the turn-signal
indicator flashes.
1 - Turn-signals
When making a normal turn, use posi-
tion (1). The lever will return automat-
ically when cornering is completed.
There are times when the lever will
not return after cornering. This occurs
when the steering wheel is turned
only slightly. In such cases, return the
lever by hand.
2 - Lane-change signals
When changing lanes, use position
(2). It will return to the neutral position
when released.NOTE
If the lamp flashes unusually quickly, the
bulb in a turn-signal lamp may have failed.
Have the vehicle inspected by an autho-
rized MITSUBISHI dealer.
E11D009
1
2
2
1
04engL2_240082_4 22-01-2004 13:20 Page 4-13

INSTRUMENTS AND CONTROLS
4-14
Club cab
*
1: Vehicles with heavy duty suspension
*2: GLS models
●: 1 person : Full luggage loading
Switch position 0-Driver only
Switch position 1-Driver + full luggage loading
Switch position 2-Driver + full luggage loading
Switch position 3-Driver + full luggage loading
Switch position 4-Driver + full luggage loading
Headlamp levelling switch*
EE01GPDc
The angle of the headlamp beam varies
depending upon the load carried by the
vehicle.
The headlamp levelling switch can be
used to adjust the headlamp illumination
distance (when the lower beam is illumin-
ated) so that the headlamps’ glare does
not distract the drivers of approaching ve-
hicles.
Set the switch (referring to the following
table) to the appropriate position accord-
ing to the number of people and the load
in the vehicle.Single cab
*
1: Vehicles with heavy duty suspension
●: 1 person : Full luggage loading
Switch position 0-Driver only
Switch position 1-Driver + full luggage loading
Switch position 2-Driver + full luggage loading
Switch position 3-Driver + full luggage loading
Switch position 4-Driver + full luggage loading

Vehicle condition
Switch
position2WD “0” “2”
4WD “0”“4”,
“2*

1

”
Vehicle condition
Switch
positionPetrol-
powered
vehicles“0” “4”, “3*

1

”
Diesel-
powered
vehicles“0” “3”, “2*
1

,*
2

”
E01G020
0
4
04engL2_240082_4 22-01-2004 13:20 Page 4-14