2004 MITSUBISHI L200 keyless

1 - Rear gate →p. 2-12
2 - High-mounted stop lamp* →p. 8-34, 8-38
3 - Electric window control* →p. 2-9
4 - Engine compartment →p. 10-25
5 - Bonnet →p. 2-7
6 - Windscreen wiper and washer →p. 4-15
7 - Antenna →p. 6-18
8 - Door mirrors →p. 5-37
9 - Locking and unlocking →p. 2-4
Keyless entry system* →p. 2-5
10 - Fuel filler →p. 5-3
11 - Rear fog lamp (Driver’s side only)*
→p. 4-19, 8-34, 8-38
12 - Number-plate lamps →p. 4-12, 8-34, 8-37
13 - Stop and tail lamps →p. 8-34, 8-37
14 - Reversing lamps →p. 8-34, 8-37
15 - Rear turn-signal lamps →p. 4-13, 8-34, 8-37
16 - Headlamps →p. 4-12, 8-35
17 - Front turn-signal lamps →p. 4-13, 8-34, 8-36
18 - Position lamps →p. 4-12, 8-34, 8-36
19 - Tyre chains →p. 9-13
Tyre rotation →p. 9-11
Changing tyres →p. 8-16
Tyre inflation pressure →p. 9-11
20 - Side turn-signal lamps →p. 4-13, 8-34, 8-36
A- Single Cab
B- Club Cab
B21A342
Exterior (Single cab, Club cab)EB21DPDf
A02A279
1
A
B 2
34
5678910
12
34
5678910 11 12 11 13 14 15 16 17 18 19 20
11 12 13 14 15 16 17 18 19 20
01engL2_240082_4 22-01-2004 12:58 Page 1-12

1 - Rear gate →p. 2-12
2 - High-mounted stop lamp* →p. 8-34, 8-38
3 - Electric window control* →p. 2-9
4 - Engine compartment →p. 10-25
5 - Bonnet →p. 2-7
6 - Windscreen wiper and washer →p. 4-15
7 - Antenna →p. 6-18
8 - Door mirrors →p. 5-37
9 - Locking and unlocking →p. 2-4
Keyless entry system* →p. 2-5
10 - Fuel filler →p. 5-3
11 - Rear fog lamp (Driver’s side only)*
→p. 4-19, 8-34, 8-38
12 - Number-plate lamps →p. 4-12, 8-34, 8-37
13 - Stop and tail lamps →p. 8-34, 8-37
14 - Reversing lamps →p. 8-34, 8-37
15 - Rear turn-signal lamps →p. 4-13, 8-34, 8-37
16 - Headlamps →p. 4-12, 8-35
17 - Front turn-signal lamps →p. 4-13, 8-34, 8-36
18 - Position lamps →p. 4-12, 8-34, 8-36
19 - Tyre chains →p. 9-13
Tyre rotation →p. 9-11
Changing tyres →p. 8-16
Tyre inflation pressure →p. 9-11
20 - Side turn-signal lamps →p. 4-13, 8-34, 8-36
B21A344
Exterior (Double cab)
A02A280
1
11 12 11 13 14 15 16 17 18 19 20236789104
5
01engL2_240082_4 22-01-2004 12:58 Page 1-13

Keys .............................................................. 2-2
Electronic immobilizer
(Anti-theft starting system)*.................. 2-2
Doors............................................................. 2-4
Keyless entry system* ................................. 2-5
“Child-protection” rear doors
(Double cab) ........................................... 2-6
Central door locks* ...................................... 2-7
Bonnet........................................................... 2-7
Manual window control* .............................. 2-9
Electric window control* ............................. 2-9
Quarter window (Club cab) ......................... 2-11
Rear gate....................................................... 2-12
Locking and unlocking
2
02engL2_240082_4 22-01-2004 12:59 Page 2-1

LOCKING AND UNLOCKING
DoorsEF12AAEd
Operation from outside the vehicle
1 - Insert or remove the key
2 - Lock
3 - Unlock
Operation from inside the vehicle
Lock knob
4 - Lock
5 - Unlock
Pull the inside door handle toward you to
open the door.
To lock the front doors without
a key
Set the inside lock knob (1) to the locked
position (so that the red mark cannot be
seen) and, while pulling the outside han-
dle up (2), close the door (3).
“Forgotten-key-prevention” mechanism
(Vehicles with keyless entry system)
If the lock knob on the driver’s door is in
the locked position and the driver’s door is
closed with the key still inserted in the igni-
tion switch, the lock will be automatically
released.
2-4
F12A102
1
2
3
F12A100
1
3 2
F12A101
54
02engL2_240082_4 22-01-2004 12:59 Page 2-4

LOCKING AND UNLOCKING
To lock the rear doors (Double cab)
Set the inside lock knob (1) to the locked
position (so that the red mark cannot be
seen), and close the door (2).
CAUTION(1) Make sure the doors are closed:
driving with doors incompletely
closed is very dangerous.
(2) Never leave children in the
vehicle unattended.
(3) Be careful not to lock the doors
while the key is inside the
vehicle.
NOTE
(1) The keyless entry system does not
operate if the key is left in the key
cylinder, or any door is open.
(2) If the UNLOCK switch is pressed and
no door is opened within approxi-
mately 30 seconds: relocking will
automatically occur.
(3) The remote control switch will operate
within about 4m from the vehicle.
However, the operating range of the
remote control switch may change if
the vehicle is located near a TV trans-
mitting tower, power station, or radio
broadcasting station.
(4) If the doors cannot be locked or un-
locked after pressing the remote con-
trol switch, the battery inside the
switch may need to be replaced.
Replace the battery at your autho-
rized MITSUBISHI dealer.
(5) If your remote control switch is lost,
please contact your authorized
MITSUBISHI dealer for a replace-
ment remote control switch.
Keyless entry system*EF11B-Za
Press the remote control switch, and all
doors will be locked or unlocked as
desired.
Operation of all doors
To lock
Press the LOCK switch, and all doors will
be locked. When they are locked with the
room lamp at the [•] position, the room
lamp and the turn-signal lamps blink
twice.
To unlock
Press the UNLOCK switch, and all doors
will be unlocked. When unlocked with the
room lamp at the [•] position, the room
lamp will be turned on for approximately
15 seconds and turn-signal lamps will
blink 4 times.
2-5
F12A103
1
2
F12D030
02engL2_240082_4 22-01-2004 12:59 Page 2-5

INSTRUMENTS AND CONTROLS
4-20
Rheostat (meter
illumination control)*
EE15A-Da
The rheostat can be adjusted while the
lamp switch is on.
Turn the dial to adjust the meter illumina-
tion to the desired brightness.
1 - To increase brightness
2 - To reduce brightness
Room lampsEE19AAOa
Room lamp
1 (OFF) -The lamp goes out.
2 (
•) -[Vehicles without keyless entry
system]
The lamp illuminates when a
door is opened and goes out
when all doors are closed.
Horn switchEE23A-Ac
When the ignition switch is in the “ON” or
“ACC” position, pressing the “”mark on
the steering wheel, causes the horn to
sound.
E19A034
1 2
3
Single cab
E23A001E15A018
1
2
04engL2_240082_4 22-01-2004 13:20 Page 4-20

INSTRUMENTS AND CONTROLS
4-21
[Vehicles with keyless entry system]
The room lamp goes on when a door
is opened. When all doors are closed,
the room lamp is illuminated and
dimmed gradually for 30 seconds
then goes out.
However, the lamp goes out immedi-
ately without being dimmed in case of
the followings:
• The ignition switch is turned “ON”.
• All doors are locked using the key
mechanism of the driver’s door, the
lock knob of the driver’s door, or the
remote control switch of the keyless
entry system.NOTE
If the ignition key is removed with the
doors closed, the room lamp is dimmed
gradually for 30 seconds and then goes
out.
3 (ON) -The lamp illuminates.Personal lamps*
Push the button to turn on the lamp. Push
it again to turn it off.
NOTE
If you leave the lamps on without running
the engine, you will run down the battery.
Before you leave the vehicle, make sure
that all the lamps are off.
E19A058E19A052
1
2
3
Club cab, Double cab
04engL2_240082_4 22-01-2004 13:20 Page 4-21

STARTING AND DRIVING
5-10
NOTE
(1) To remove the key, push in the key at
the “ACC” position and keep it de-
pressed until it is turned to the
“LOCK” position and remove it.(2) If your vehicle is equipped with igni-
tion switch illumination, the ignition
switch illumination comes on while
the driver’s door is opened and
remains on for approximately 15 sec-
onds (with keyless entry system,
approximately 30 seconds) after the
driver’s door is closed.
However, it will go off even before a
lapse of 15 seconds (with keyless
entry system, approximately 30 sec-
onds) if the ignition switch is set to the
“ON” position.
[Vehicle with keyless entry system]
When you get out of the vehicle and
remove the ignition key, it will be illu-
minated for about 30 seconds.
(3) If your vehicle is equipped with an elec-
tronic immobilizer, to start the engine,
the ID code which the transponder
inside the key sends must match the
one registered in the immobilizer com-
puter. (Refer to page 2-2.)
(4) If your vehicle is equipped with the
Daytime Running Light, when the
ignition switch is “ON”, the headlamp
low beams etc. are turned on. Refer
to “Headlamps”.
CAUTION(1) Do not remove the ignition key
from the ignition switch while
driving. The steering wheel will
be locked, causing loss of con-
trol.
(2) If the engine is stopped while
driving, the brake servomech-
anism will cease to function and
braking efficiency will deteri-
orate. Also, for vehicles with
power steering, the power steer-
ing system will not function and
it will require greater manual ef-
fort to operate the steering.
(3) Never coast downhill with the
engine OFF. Keep the engine
running whenever the vehicle is
in motion.
(4) Do not leave the key in the “ON”
position for a long time when the
engine is not running; doing so
will cause the battery to be dis-
charged.
(5) Do not turn the key to the
“START” position when the en-
gine is running; doing so could
damage the starter motor.
I21A043
05engL2_240082_4 22-01-2004 13:04 Page 5-10