2004 MITSUBISHI L200 brake fluid

[x] Cancel search: brake fluid

Page 72 of 264

MITSUBISHI L200 2004  Owners Manual (in English) INSTRUMENTS AND CONTROLS
A/T (Automatic transmission) warning
lamp* - red
ED73A-Xa
The A/T warning lamp comes on when the A/T
fluid temperature becomes abnormally high. Nor-
mally the warning lamp com

Page 73 of 264

MITSUBISHI L200 2004  Owners Manual (in English) INSTRUMENTS AND CONTROLS
Oil pressure warning lamp - redED25A-Ai
This lamp illuminates when the ignition key is
turned “ON”, and goes off after the engine has
started. If it illuminates while the

Page 113 of 264

MITSUBISHI L200 2004  Owners Manual (in English) STARTING AND DRIVING
5-27
CAUTIONS(1) Do not force the vehicle to driver
recklessly on sandy surfaces. In
comparison with normal road
surfaces, the engine and other
drive-system components are
put und

Page 172 of 264

MITSUBISHI L200 2004  Owners Manual (in English) VEHICLE CARE
PolishingEK04A-Ac
The vehicle should only be polished if the
paintwork has become stained or lost its
lustre. Matt-finish parts and plastic
bumpers must not be polished, polishing
these p

Page 202 of 264

MITSUBISHI L200 2004  Owners Manual (in English) 2. You could be injured if the vehicles
roll. Set the parking brake firmly on
each vehicle. Put an automatic trans-
mission in “P” (PARK) position or a
manual transmission in “N” (Neutral)
pos

Page 215 of 264

MITSUBISHI L200 2004  Owners Manual (in English) Engine oil ................................................................ 9-2
Automatic transmission fluid* .............................. 9-4
Engine coolant ........................................

Page 218 of 264

MITSUBISHI L200 2004  Owners Manual (in English) MAINTENANCE
Selection of engine oil
(diesel-powered vehicle)
EM03BAO
(1) Select engine oil of the proper SAE
viscosity number according to the
atmospheric temperature.
2) Use engine oil conforming to

Page 222 of 264

MITSUBISHI L200 2004  Owners Manual (in English) MAINTENANCE
CAUTION(4) If the battery is to be quick-
charged, first disconnect the
battery cables.
(5) In order to prevent a short
circuit, be sure to disconnect the
negative (–) terminal first.
(6
Page:   1-8 9-16 next >