2004 MITSUBISHI ENDEAVOR air conditioning

REMOVAL AND INSTALLATIONPre-removal and Post-installation Operation

Refrigerant draining and Refilling (Refer to
CHARGING
and
DISCHARGING
.)
Engine coolant Draining and Refilling (Refer to
13. ENGINE COOLANT
(CHANGE)
.)
Instrument Panel Removal and Installation (Refer to
REMOVAL AND
INSTALLATION
.)
Steering Column Shaft Assembly Removal and Installation (Refer to REMOVAL AND INSTALLATION
.)

2004 Mitsubishi Endeavor LS
2004 HVAC Heater Air Conditioning, Ventilation - Endeavor

Fig. 281: Removing And Installing Heater Uni
t
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

REMOVAL SERVICE POINTS << A >> SUCTION PIPE AND LIQUID PIPE DISCONNECTION To prevent the entry of dust or other foreign bodies, plug the dismantled hose and
the nipples of the expansion valves. Fig. 282: Identifying Connectors

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.CAUTION: As the compressor oil and receiver are highly
moisture absorbent, use a non-porous material to
plug the hose and nipples.
2004 Mitsubishi Endeavor LS
2004 HVAC Heater Air Conditioning, Ventilation - Endeavor

Fig. 283: Identifying Connectors

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
2004 Mitsubishi Endeavor LS
2004 HVAC Heater Air Conditioning, Ventilation - Endeavor

Fig. 284: Identifying Connectors

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
2004 Mitsubishi Endeavor LS
2004 HVAC Heater Air Conditioning, Ventilation - Endeavor

Fig. 285: Identifying Connectors C
-310 And C
-308

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

<< B >> FRONT DECK CROSSMEMBER ASSEMBLY REMOVAL Disconnect the following connectors to gain access to the front deck crossmember. CONNECTOR DESCRIPTION

Connector
number
Connector name
C-11
AUDIO AMPLIFIER
C-12
AUDIO AMPLIFIER
INSTRUMENT PANEL WIRING HARNESS AND FRONT

2004 Mitsubishi Endeavor LS
2004 HVAC Heater Air Conditioning, Ventilation - Endeavor

DISASSEMBLY AND ASSEMBLY C-13
DOOR WIRING HARNESS (RH) COMBINATION
C-14
CAPACITOR
C-15
INSTRUMENT PANEL WIRING HARNESS AND FRONT
WIRING HARNESS COMBINATION
C-26
SRS-ECU
C-29
INSTRUMENT PANEL WIRING HARNESS AND FRONT
DOOR WIRING HARNESS (LH) COMBINATION
C-30
INSTRUMENT PANEL WIRING HARNESS AND FLOOR
WIRING HARNESS COMBINATION
C-31
INSTRUMENT PANEL WIRING HARNESS AND FRONT
WIRING HARNESS COMBINATION
C-32
FRONT WIRING HARNESS AND FLOOR WIRING
HARNESS COMBINATION
C-112
INSTRUMENT PANEL WIRING HARNESS AND FLOOR
WIRING HARNESS COMBINATION
C-117
INSTRUMENT PANEL WIRING HARNESS AND
CONSOLE WIRING HARNESS COMBINATION
C-204
FLOOR WIRING HARNESS AND JUNCTION BLOCK
COMBINATION
C-205
ROOF WIRING HARNESS AND JUNCTION BLOCK
COMBINATION
C-212
FRONT WIRING HARNESS AND JUNCTION BLOCK
COMBINATION
C-214
FRONT WIRING HARNESS AND JUNCTION BLOCK
COMBINATION
C-216
FRONT WIRING HARNESS AND JUNCTION BLOCK
COMBINATION
C-308
IGNITION SWITCH
C-310
KEY REMINDER SWITCH

2004 Mitsubishi Endeavor LS
2004 HVAC Heater Air Conditioning, Ventilation - Endeavor

2004 Mitsubishi Endeavor LS
2004 HVAC Heater Air Conditioning, Ventilation - Endeavor

Fig. 286: Exploded View Of Heater Uni
t
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

INSPECTION AIR THERMO SENSOR INSPECTION Measure the resistance between connector terminals 1 and 2 under at least two
different temperatures. The resistance values should generally match those in the
graph. Fig. 287: Air Thermo Sensor Resistance

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

MOTORS AND TRANSISTORNOTE: The temperature at the check should not exceed the range
in the graph.
2004 Mitsubishi Endeavor LS
2004 HVAC Heater Air Conditioning, Ventilation - Endeavor