2004 ISUZU TF SERIES suspension

[x] Cancel search: suspension

Page 3502 of 4264

ISUZU TF SERIES 2004  Workshop Manual 3C-10  FRONT SUSPENSION  
4.  Support lower control arm with a jack.  
5.  Remove the bolt (7) and nut (4). 
6.  Remove lower ball joint nut and cotter pin(5), then use remover 5-8840-2017-0 to remove

Page 3503 of 4264

ISUZU TF SERIES 2004  Workshop Manual FRONT SUSPENSION  3C-11
 
NOTE: Paint mark to be outer side of after assembly to
vehicle. 
2. Install nut (2), then tighten it to the specified
torque. 
Torque: 55N

 m (5.6kg

 m/41lb ft) 
3.

Page 3504 of 4264

ISUZU TF SERIES 2004  Workshop Manual 3C-12  FRONT SUSPENSION 
Shock Absorber with Coil Spring 
 
 RTW340LF002101 
 
Legend 
 
1. Nut 
 2. Washer 
 
3. Bushing ; Rubber 
 
4. Mounting Bracket 
 
5. Coil Spring  
 
 
6. Bushing ; Rubber

Page 3505 of 4264

ISUZU TF SERIES 2004  Workshop Manual FRONT SUSPENSION  3C-13 
  Disassembly 
 
 
 
 
 
   1. Install the support fixture (5-8840-0595-0) to the base (5-
8840-003-0). 
  2. Install the upper adapter (5-8840-0597-0) and the lower 
adapter

Page 3506 of 4264

ISUZU TF SERIES 2004  Workshop Manual 3C-14  FRONT SUSPENSION 
 
 Reassembly 
1.  Reassemble the parts inside the support fixture. 
2.  When tightening the bolt, compress the spring so that i
t
does not apply pressure to the spring seat.

Page 3507 of 4264

ISUZU TF SERIES 2004  Workshop Manual FRONT SUSPENSION  3C-15
 
Stabilizer Bar 
Stabilizer Bar and Associated Parts 
 
  
 
 RTW340LF000901 
Legend 
 
(1) 
Stabilizer Bar 
 
(2) 
Link 
 
(3) 
Nut 
  
 
(4) 
Nut 
 
(5) 
Bracket and Bolt

Page 3508 of 4264

ISUZU TF SERIES 2004  Workshop Manual 3C-16  FRONT SUSPENSION
 
Inspection and Repair 
Make necessary correction or parts replacement if
wear, damage, corrosion or any other abnormal
condition are found through inspection. 
Check the foll

Page 3509 of 4264

ISUZU TF SERIES 2004  Workshop Manual FRONT SUSPENSION  3C-17
 
Knuckle 
Knuckle and Associated Parts 
  
 
 450R300037 
Legend 
 
(1) 
Nut and Cotter Pin 
 
(2) 
Back Plate 
 
(3) 
Nut and Cotter Pin 
  
 
(4) 
Nut and Cotter Pin 
 
(5)