2004 DACIA SOLENZA warning

82
ACCOUSTIC WARNING - ANTI STARTING
82 - 44
Diagnostic – General
-If doors are unlocked and none of them is
not opened in the next 30 seconds, the system
is automatically re-locking the vehicle doors
(without hazard lights blinking). -Cockpit central Unit is controlling the
vehicle inside lightening. In case a ceiling lamp
still lighted, Cockpit Central Unit is cutting the
supplying after approximately 30 minutes.
- The model “Full equipment” is controlling
the ceiling lamp progressive turning off, after
doors blocking by means of the remote control.
- Cockpit Central Unit may set on the hazard
lights in case of “shock connection” information
coming from UCE airbag.
-S pare parts keys are delivered not coded,
so they have no code.
-I t is possible in case of key’s l oss, theft or
by client’s request, that one vehicle ke y is
decommissioned. This one may be re-assigned
on the same vehicle, if necessary.
ATT E NT ION:
〈〈 〈〈
By this sy stem , i t i s i mp os s ib le th e
replacem ent of Coc kpit Central Unit and
keys in the same time. These parts are sold
not coded. 〈〈〈〈
The code me morized by the system’s
elements can not be erased (Cockpit
Central Unit and injection computer). The
memorized code can not be erased.
GENERAL
Cockpit Central Unit (UCH) is replacing
the UCE decoder.
Cockpit Ce ntral Unit is located under
dashboard, left side.
I MPORTANT
When replacing the Cockpit central Unit
it will be necessary to set the function
correspon ding to the vehicle equipment level,
by means of the CLIP tester.
ATT E NT ION
Starting is impossible unless the anti-
starting programming procedure is
performed.
When replacing a Cockpit Central Unit, it
is necessary to perform the programming and
settin g corresponding to the vehicle equipment
level.
When adding a key it is necessary that keys
re-assignation procedure be performed.
System’s characteristics.
- This system may work with maximum 4
remote controls (Cockpit central unit can
manage only 4 different codes).
-Radio-fr equenc y si gnal receive r i s
integrated in Cockpit Central Unit
-D oors central locking button is not
activated when doors ha ve be en c losed by
means of the remote control.
-Doors locking and unlocking using the
remote control may be visualized by hazard
lights signals (if all doors are properly closed);
- locking : 2 signals
- unlocking: 1 signal
vnx.su

82
ACCOUSTIC WARNING - ANTI STARTING
82 - 45
Diagnostic – General
REPLACEMENT AND SETTING
Ne w parts are not coded. Once mounted on vehicle, in order to become under operation,
the memorization of a code it is necessary.
In order to perform this procedure, i t is absolutely necessary that some ve hicle parts are
already coded (with the vehicle code).
Refer to the assignations table:
ATTENTION :if a part is memorizing the code this one is assigned to this specif ic vehicle
and it is impossible that subsequently this c ode is erased or a second code is memorized. The
first time memorized code can not be anymore erased.
ASSIGNATION TAB LE
〈
The key assigned to a vehicle must be new and already programmed on that vehicle.
REMARK : this may be programmed n vehicle but it is not effective (not assigned).
ATTENT ION :
only the ke ys presented when performing this operation are to be under
operation.
AFT E R
SAL E
IN TE RVE N TION ELEMENTS CO
NDITION RE PARATI ON
CODE
NECESSITY
Cockpit Central
Unit Ke yInjection
co mputer
Cockpit Central Unit
programming
Key’ assignation or
deletion
Injec tion computer
programming new
c
oded
c oded c
oded
new *
c oded c
oded
-
new YES
YES
NO
vnx.su

82
ACCOUSTIC WARNING - ANTI STARTING
82 - 46
Cockpit centra l Unit is not c oded. Once mounted on vehicle, i n order t o become under
operation, the memorization of a code it is necessary.
In order to perform this procedure, it is obligatory to have at least one of the vehicle old keys,
to know the reparation code and the injection computer must be correctly coded (please refer
to the assignation table). isvehicle, in order to become under operation, the memorization of a
code it is necessary.
I ATTENTION : if Cockpit Central Unit is memorizing a code, this one is assigned only to
that vehicle. It is impossible the code erasing or memorizing another code. eh old keys, to knhe
re IMPORTANT : only the keys presented when performing this procedure are becoming
under operation, with the condition:
- they have been already coded on this vehicle.
- they are ne w (not coded). icn c omputer m ust be correctly coded (please refe r to tho
R EMARK: if only Cockpit Central Unit is to be replaced, it is not necessary to perform
any intervention to the injection computer: this one will keep the same anti starting code.
SPECIAL SITUATIONS
If the screen displays:
“ Inserted after-sale code does not c or-
respond to the presented key. Check if the
code was correctly e ntered and if a vehicle
key was presented” : the code is not corre -
s ponding to the vehicle or a new key has been
used.
“Cockpit Central Unit is not empty. Start
the keys programming procedure” . Cock-
pit Central Unit is alre ady coded on this ve-
hicle. “Cockpit Central unit programming fail-
u re, key not possible to be used on this
vehicle”; the key code does not correspond
to the entered code (the key is be longing to a
vehicle of another type).
Diagnostic – General
PR OGRAMMING PROCEDURE OF
THE COCKPIT CE NTRAL UNIT
By means of the CLIP tester:
Enter in dialogue with system “Anti-start-
ing”. In menu “Control module”, “Spec ific
control ” , val idate line “SC027: Cockpit
Central Unit programming” The te ster is displaying “ Ta ke off the key
from anti-theft contact”
The te ster is displaying “Introduce the
after- sale code”. With the contact off, insert
the after-sal e secret code (12 hexadecimal
characters), the validate it.
If the code format is correct, the tester is
displaying “Insert an alre ady coded key on
the vehicle, set the contact on and then
va lidate” and the programming procedure is
under way. The t est er i s displ aying “ UCH pro-
grammed. Start the keys programming
procedure” and the Cockpit Central Unit is
coded. In this moment, it is necessary to enter
in the key programming mode, in order assign
the others keys (maximum four). More sec-
onds may pass before this message is displayed.
ATTENTION : the maximum interval between
each operati on is of 5 minute s if not the
procedur e is canceled.
vnx.su

82
ACCOUSTIC WARNING - ANTI STARTING
82 - 47
THE PROCEDURE OF COCKPIT CENT RAL UNIT PROGRAMMING
Diagnostic – General
The code can be entered only whencontact is et off
Enter in dialogue with system “Anti-starting”
Select menu “Control menu” and “Specific
control”.
S elect control “SC027 Cockpit Central
Unit Programming”.
T ester is displayin g:
“Take off the key from anti-theft contact”
Tester is displaying:
“Enter the after-sale code”
Enter t he code ( 12 hexadecimal
characters, capital l etters)
Tester is displaying:
“Insert an already programmed key on
vehicle”
Insert a key belonging to the vehicle and set
the contact on.
The procedure can not be performed with a
new key.
A
If tester is displayin g:
“Cockpit Central Unit is no
empty.
St art the key programming
procedure”.
Cockpit Central Unit is already
coded on this vehicle
vnx.su

82
ACCOUSTIC WARNING - ANTI STARTING
82 - 48
Diagnostic – General
A
If tester is displayin g:
“The after-sale code does
no t correspond to the pre-
sented key. Check if the
code was correctly en-
tered and if a vehicle key was presented
”.
If tester is displayin g:
“UCH programming fail-
ure. K ey not in use on
this vehicle”. The entered c ode does not
correspond to the vehicle’s key, the key does not belong to t hat vehicle or it is new.
The ke y code does not
correspond with t he e ntere d code
(the key belongs to other vehicle).
vnx.su

82
ACCOUSTIC WARNING - ANTI STARTING
82 - 49
Diagnostic – General
THE PROCEDURE OF
KEYS ASSIGNATION
IMPORTANT : if not all keys are available it
will be necessary to subsequently perform the
assignation procedure with all the keys.
Enter in dialogue with syste m “Anti-
starting” .
In menu ”Control menu”, “Spe cifi c
c ontrol” , validate line “SC028: Key program-
ming”. Tester is displaying: “Take off the key from
anti-the ft contact”.
Tester is displaying “Enter the after-sale
code” .
With contact set off, enter the after-sale se-
cret code ( 12 hexadecimal characters) and vali-
date it. Tester is displaying “Attenti on. Not pre-
se nted k eys will be not active. Re -launch
th e procedure in order to re-assign them”:
the programming is under way. Tester is displaying: “Insert key in anti-
theft contact and set the contact on, then
validate” : set the contact on using a vehicle key
or a new key. Tester is displaying: “No of programmed
keys 1” and “ take off the key from anti-
theft contact, then validate” .
Tester is proposing: “Do you wish to pro-
gram a new key ?”. In order to assign additional keys, set the con-
tact on few seconds using the vehicle’s others
keys that must be assigned (maximum four), then
validate. Tester is displaying: “2, 3, 4 programmed
keys” and “ take off th e key from anti-theft
contact”. ATTE NT I ON: t h es e on es mus t be t he
vehicle ’s old keys or new not coded keys.
Tester is displaying: “ Data entry in me mory”,
Cockpit Central Unit is coded and the keys are
a ssigned.Th is message will be displayed for few
seconds, then you may come out from the re-
a ssignation procedure
ATTENTION : the maximum admissible
interval between each operation is of 5 min-
utes otherwise the procedure is canceled.
Tester is displaying in this situation the
me ssage: “Pe r for ming co nditions not
ac c ompli shed”. T hi s me ss age is also
d isplayed in case of dialogue loss with the
Cockp it C entral Unit or in case of battery
supplying cutting off.
SPECI AL SI TUATIONS
If te ster is displaying:
“Coc kpit Central Unit is empty. Launch
the C ockpit Centra l Un it p rogrammi ng
procedure”, th en the Cockpit Central Unit is
no t used. It is impossible to assign keys to a
not coded Cockp it Central Unit.
“Per forming conditions not accom-
pli s hed ”, t he entere d code is not correct;
check and then start ag ain the code entering
procedure.
If the key does corres pond to the Cockpit
Central Unit of that vehicle, the tester is dis-
playing “Interrupted procedure: attention,
the keys assigned to the vehicle are the
on es that have been assigned before pro-
cedure s tarting. T he pr es ented k eys be-
fore proc edure interruptio n are not any-
more empty and can be only assigned to
th is vehicle” assigned.
vnx.su

82
ACCOUSTIC WARNING - ANTI STARTING
82 - 50
Diagnostic – General
THE PROCEDURE OF KEYS’ ASSIGNATION
Enter in dialogue with thesystem “Anti-starting”
Select menu
“ Control module” and
“Specific c ontrol”.
V alidate line “SC 028:
Key programming”.
Tester is displaying: “
take off the key from
anti-theft contact”
T ester is displaying Enter
The after-sale code”.
Enter th e code (12
hexadecimal characters
with capitals) then validate it
A
The procedure must be performed
only when contact is set off.
If tester is displayin g:
“Cockpit Central Unit is
empty Launch the Cockpit
Central Unit programming
procedure”.
Tester is displaying
“ P erformi ng conditions
no t accomplished ”. Cockpit Central Unit is new.
It is impossible to assign the
keys to a Cockpit Ce ntral Unit not coded.
The entere d code is wrong or
it s not correct.
Check and re-e nter the c ode.
vnx.su

82
ACCOUSTIC WARNING - ANTI STARTING
82 - 51
Diagnostic – General
Te s t e r i s displaying: “At te nti o n.
The non presented keys shall be not
active. Re-launch the p rocedure in
order to re-assign them”.
T ester is displaying: “ Insert
k ey in anti-theft c ontact, set
contact on, then validate”.
Insert a key in anti-theft con-
tact. The key m ust be new or belonging to this vehicle. This procedure is enabling the
decommissionin g of one key in
case of its loss, for instance
T ester is displaying: 1 key
Pr ogrammed”, “Take off the
k ey from anti-theft contact,
then validate”.
Tester is displaying: “ Do you
wish to program another key?”
Insert another new key or
belonging to this vehicle in the anti-theft contact.
Tester is displaying: “ 2,3,4 keys
p rogrammed” then “T ake off the
k ey from t he anti-theft contact, then
validate”.
T ester is displaying: “ Data
entry in memory”.
The keys are assigned to the
vehicle. Check if the vehicle is starting and if the doors get
blocked by means of all keys If tester
is displayin g:
“Interrupted procedure: at- tention, the vehicle’s as-
s igned keys are those that
w ere assigned before the
procedure launching. The
keys presented before the
procedure interruption are
no t anymore empty and can
be assigned only to this ve-
hicle”.
The vehicle may use maximum 4 keys. The key does not
correspond to the
UCH of this vehicle
vnx.su