57
57 - 3
INSIDE ACCESSORIES
Dismo unt :
-t wo side attachment screws (8) of the
upper part dashboard by means of a wrench T
20(“L” shape);
-screws (9) attaching the upper part
dashboard with the l ower part on the driving
post cross member, by means of a screwdriver
with T20 head. Detach from clips placed in points (10) the
upper part dashboard. Sw ing over the windscreen the upper part
dashboard and de tach from c lips poi nts (11)
of the windscreen lower cross beam. Detach from clips the radio from i ts sup-
port.
Disconnect the connectors and the ra dio
antenna (for the vehicle provided with radio-
cassettes player). Disconnect the central l ocking connector
(for the vehicle provided with central locking).
Take out the upper part dashboard from the
cockpit.
REMARK :
Dismounting of the upper part dash-
board, does not imply steering wheel dis-
mounting.
Disconn ect the anti-star ting bushing connec-
tor.
Detach from clips the anti-starting bushing
(12).
8
8
10
9
11
12
13
13 Dismount
the attachme nt screws (13) of the
instrument panel and disconnect the four con-
nectors.
Dashboard
vnx.su
INSTRUMENT PANEL
83
83 - 4
DISMOUNTIN G
Disconnect the battery (-) terminal.
Dismount the 3 attachment screws of the steering wheel half-casing, by means of a TORX 20
screwdriver. Detach from clips the steering wheel half-casings and remove them.
By means of a TORX 20 wrench (“L” shaped), dismount the side attachment screws of the
upper dashboard. By means of a TORX 20 screwdriver dismount the two front attachment screws of the upper
dashboard. Detach from the three clips of the windscreen lower crossbeam, the upper dashboard.
Di smount the radio-tape pl ayer from the upper dashboard (if the vehicle is equipped with
radio): press its side c lips and extract it from the upper da shboard. Disconnect the a ntenna’s
connector and the radio-tape two connectors. Disconn ect the central locking switch connector (if the vehicle is provided with central locking).
Remove the upper dashboard towards vehicle right part.
By means of a TORX 20 screwdriver, dismount the a ttachment screws of the i nstrument
panel on the lower dashboard. Disconnect the four connectors of the instrument panel. Mark the identification mounting
position of the connectors.
R EMOU NT I NG
Perform the dismounting operations in the reverse order.
Perform functional tests of the instrument panel.
OBSERVATION: After battery reconnecti ng, re-program the clock and for the
vehicles equipped with programmable radio, reinsert the radio code.
P erform functional instrument panel
vnx.su
