2003 NISSAN TEANA reverse

HEADLAMP WASHER
WW-57
C
D
E
F
G
H
I
J
L
MA
B
WW

Removal and Installation of Headlamp Washer NozzleBKS002EX
REMOVAL
1. Pull out headlamp washer nozzle from a bumper, remove pawl
(A), and remove headlamp washer nozzle cover (1).
2. Remove undercover one.
3. Remove fender protector. Refer to EI-23, "
FENDER PROTEC-
TOR" .
4. Remove front bumper. Refer to EI-14, "
FRONT BUMPER" .
5. Remove headlamp washer tube (1). Refer to WW-58, "
Removal
and Installation of Headlamp Washer Tube Connector" .
6. Removal headlamp washer nozzle retainer (A).
7. Removal headlamp washer nozzle bracket (2).
8. Remove headlamp washer nozzle assembly (3).

The check valve is installed in headlamp washer nozzle
assembly.

The check valve prevents backflow of washer fluid.
INSTALLATION
Installation is the reverse order of removal.
CAUTION:
When installing nozzle, there should be no packing twist, etc.
AdjustmentBKS002EY
PKIC9877E
PKIC9878E
PKIC9879E
a: 45° ±3°
b: 46° ±3°
c: 14° ±3°
d: 11° ±3°

WW-58
HEADLAMP WASHER

Removal and Installation of Washer TankBKS002EZ
Refer to WW-38, "Removal and Installation of Washer Tank" .
Removal and Installation of Headlamp Washer Tube ConnectorBKS002F0
REMOVAL
Remove headlamp washer tube while pressing the area that has no
pawls (A) of headlamp washer tube connector (1), in direction shown
by the arrow ( ) in the figure.
INSTALLATION
Installation is the reverse order of removal.
Removal and Installation of Headlamp Washer PumpBKS002F1
REMOVAL
1. Remove front bumper. Refer to EI-14, "FRONT BUMPER" .
2. Disconnect headlamp washer pump connector (1).
3. Remove headlamp washer tube (2). Refer to WW-58, "
Removal
and Installation of Headlamp Washer Tube Connector" .
4. Remove the headlamp washer pump mounting bolt (A).
5. Remove the headlamp washer pump (3) from washer tank.
INSTALLATION
Installation is the reverse order of removal.
CAUTION:
When installing headlamp washer pump, there should be no packing twist, etc.
Removal and Installation of Headlamp Washer SwitchBKS003XZ
1. Remove instrument driver lower panel. Refer to IP-10, "INSTRUMENT PANEL ASSEMBLY" .
2. Spread pawls (A) of instrument driver lower panel to remove
headlamp washer switch(1).
SKIB8842E
PKIC9880E
Headlamp washer pump
mounting bolt:4.5 N·m (0.46 kg-m, 40 in-lb)
PKID0329E

CIGARETTE LIGHTER
WW-61
C
D
E
F
G
H
I
J
L
MA
B
WW

Removal and InstallationBKS001UC
REMOVAL
1. Remove ashtray. Refer to IP-10, "INSTRUMENT PANEL ASSEMBLY" .
2. Remove screws from rearward cigarette lighter socket.
3. Pull out cigarette lighter.
4. Insert a small screwdriver or similar tool between the cigarette
lighter socket and cigarette lighter ring. Pull out cigarette lighter
socket.
INSTALLATION
Installation is the reverse order of removal.
CAUTION:
Align notches of cigarette lighter ring and cigarette lighter socket when installing.
SKIA6400E
SKIA6401E

HORN
WW-63
C
D
E
F
G
H
I
J
L
MA
B
WW

Removal and InstallationBKS001UE
REMOVAL
1. Disconnect all horn connectors.
2. Remove horn mounting bolt, and remove horn from vehicle.
INSTALLATION
Installation is the reverse order of removal.
SKIB0911E
Horn mounting bolt : 17.1 N·m (1.7 kg-m, 13ft-lb)