2001 TOYOTA SEQUOIA oil

SS085±04
± SERVICE SPECIFICATIONSBRAKE
SS±43
185 Author: Date:
2005 SEQUOIA (RM1146U)
TORQUE SPECIFICATION
Part tightenedN´mkgf´cmft´lbf
Bleeder plug1111 08
Master cylinder x Reservoir1.51513 in.´lbf
Master cylinder x Brake booster2525018
Master cylinder x Master cylinder pressure sensor2525018
Brake booster clevis lock nut2525018
Brake booster x Brake booster bracket2525018
Brake booster x Pedal bracket131309
Brake pedal x Pedal bracket3435025
Stop light switch lock nut2526019
Parking brake pedal assembly x Pedal bracket3232023
Parking brake pedal assembly x Body131309
Brake line union nut 10 mm1515511
12 mm19.519514
Front disc brake caliper x Steering knuckle1231,25090
Rear disc brake caliper installation bolt8890065
Rear disc brake caliper x Flexible hose3132023
Rear disc brake torque plate x Backing plate1051,07077
Actuator bracket x Body1111 28
Actuator bracket x Actuator assembly9.59784 in.´lbf
Actuator x Skid control ECU1.81816 in.´lbf
Speed sensor installation bolt8.08271 in.´lbf
Front speed sensor harness x Steering knuckle8.08271 in.´lbf
Front speed sensor harness x Upper arm8.08271 in.´lbf
Front speed sensor harness x Coil support8.08271 in.´lbf

SS08W±04
SS±44
± SERVICE SPECIFICATIONSSTEERING
186 Author: Date:
2005 SEQUOIA (RM1146U)
STEERING
SERVICE DATA
POWER STEERING FLUID
Oil level rise Maximum5 mm (0.20 in.)
Oil pressure at idle speed with valve closed Minimum8,336 kPa (85 kgf/cm2, 1,209 psi)
STEERING WHEEL
Steering wheel freeplayMaximum30 mm (1.18 in.)
Steering effort at idle speedReference:4.9 N´m (50 kgf´cm, 43 in.´lbf)
PS VANE PUMP
Pump shaft and front housing bushing oil clearance STD0.03±0.05 mm (0.0012±0.0020 in.)
Pump shaft and front housing bushing oil clearanceMaximum0.07 mm (0.0028 in.)
Vane plate heightMinimum8.6 mm (0.339 in.)
Vane plate thickness Minimum1.397 mm (0.0550 in.)
Vane plate lengthMinimum14.991 mm (0.5902 in.)
Vane plate and pump rotor groove clearanceMaximum0.033 mm (0.0013 in.)
Vane plate length Pump rotor and cam ring mark
None14.999±15.001 mm (0.59051±0.59059 in.)
114.997±14.999 mm (0.59043±0.59051 in.)
214.995±14.997 mm (0.59035±0.59043 in.)
314.993±14.995 mm (0.59027±0.59035 in.)
414.991±14.993 mm (0.59020±0.59027 in.)
Flow control valve spring length Minimum33.2 mm (1.307 in.)
Pump rotating torqueMaximum0.28 N´m (2.8 kgf´cm, 2.4 in.´lbf) or less
PS GEAR
Steering rack runout Maximum0.03 mm (0.0118 in.)
Total preload Turning1.2±1.6 N´m (12±16 kgf´cm, 10.4±13.9 in.´lbf)

SS±50
± SERVICE SPECIFICATIONSBODY
192 Author: Date:
2005 SEQUOIA (RM1146U) Rear seat reclining adjuster x Seat cushion frame
4344032
Rear seat reclining adjuster x Seatback frame4344032
REAR NO. 2 SEAT±±±
Seat adjuster x Seat cushion frame1919514
No .2 seat reclining adjuster x Seat cushion frame4344032
No. 2 seat reclining adjuster x Seatback frame4344032
SEAT BELT±±±
Front seat outer belt shoulder anchor x Adjustable anchor4243032
Front seat outer belt floor anchor x Body4243032
Front seat outer belt retractor x Body4243032
Adjustable anchor x Body4243032
Front seat inner belt x Front seat4243032
Rear No. 1 seat outer belt shoulder anchor x Adjustable anchor4243032
Rear No. 1 seat outer belt floor anchor x Body4243032
Rear No. 1 seat outer belt retractor x Body Upper bolt:8.58776 in.´lbf
Rear No. 1 seat outer belt retractor x Body Lower bolt:4243032
Rear outer belt retractor x Rear No. 1 seat4243032
Rear outer belt floor anchor x Rear seat lock4243032
Rear No. 2 seat outer belt shoulder anchor x Body4243032
Rear No. 2 seat outer belt floor anchor x Body4243032
Rear No. 2 seat outer belt retractor x Body Upper bolt:8.58776 in.´lbf
Rear No. 2 seat outer belt retractor x Body Lower bolt:4243032
Rear No.2 seat outer center belt x Body4243032
Rear No. 2 inner belt x Rear No. 2 seat4243032
SIDE STEP±±±
Side step bracket x Body1919514
Step plate x Side step bracket4.95043 in.´lbf
ROOF RACK±±±
Front leg x Body1111 58
Center support x Body1111 58
Rear leg x Body1111 58
SPOILER±±±
Rear spoiler x Body121208

DID7O±02
± DIAGNOSTICSENGINE
DI±3
197 Author: Date:
2005 SEQUOIA (RM1146U)
TOYOTA PART AND SYSTEM NAME LIST
This reference list indicates the part names used in this manual along with their definitions.
TOYOTA/LEXUS nameDefinition
Toyota HCAC system, Hydro±carbon Adsorptive Catalyst
(HCAC) system, HC adsorptive three±way catalystHC adsorptive three±way catalytic converter
Variable Valve Timing sensor, VVT sensorCamshaft position sensor
Variable valve timing system, VVT systemCamshaft timing control system
Camshaft timing oil control valve, Oil control valve, OCV,
VVT, VSVCamshaft timing oil control valve
Variable timing and lift, VVTLCamshaft timing and lift control
Crankshaft position sensor ºAºCrankshaft position sensor
Engine speed sensorCrankshaft position sensor
THAIntake air temperature
Knock control moduleEngine knock control module
Knock sensorEngine knock sensor
Mass or volume air flow circuitMass air flow sensor circuit
Vacuum sensorManifold air pressure sensor
Internal control module, Control module, Engine control
ECU, PCMPower train control module
FC idleDeceleration fuel cut
Idle air control valveIdle speed control
VSV for CCV, Canister close valve VSV for canister controlEvaporative emissions canister vent valve
VSV for EVAP, Vacuum switching valve assembly No. 1,
EVAP VSV, Purge VSVEvaporative emissions canister purge valve
VSV for pressure switching valve, Bypass VSVEvaporative emission pressure switching valve
Vapor pressure sensor, EVAP pressure sensor, Evaporative
emission control system pressure sensorFuel tank pressure sensor
Charcoal canisterEvaporative emissions canister
ORVR systemOn±board refueling vapor recovery system
Intake manifold runner controlIntake manifold tuning system
Intake manifold runner valve, IMRV, IACV (runner valve)Intake manifold tuning valve
Intake control VSVIntake manifold tuning solenoid valve
AFSAir fuel ratio sensor
O2 sensorHeater oxygen sensor
Oxygen sensor pumping current circuitOxygen sensor output signal
Oxygen sensor reference ground circuitOxygen sensor signal ground
Accel position sensorAccelerator pedal position sensor
Throttle actuator control motor, Actuator control motor, Elec-
tronic throttle motor, Throttle control motorElectronic throttle actuator
Electronic throttle control system, Throttle actuator control
systemElectronic throttle control system
Throttle/pedal position sensor, Throttle/pedal position switch,
Throttle position sensor/switchThrottle position sensor
Turbo press sensorTurbocharger pressure sensor
Turbo VSVTurbocharger pressure control solenoid valve
P/S pressure switchPower±steering pressure switch
VSV for ACMActive control engine mount

DID7P±01
B17433
Heated Oxygen Sensor
(Bank 2 Sensor 2) Fuel Pump
Resister
Knock Sensor 2
A/F Sensor
(Bank 1 Sensor 1) A/F Sensor
(Bank 2 Sensor 1)EVAP VSV
Combination Meter
Ignition Coil with Igniter
ECM Knock Sensor 1
Injector Throttle Body
(Throttle Position Sensor,
Throttle Control Motor)Mass Air Flow
Meter
Camshaft
Position Sensor
Crankshaft Position
SensorHeated Oxygen Sensor
(Bank 2 Sensor 2)
Park/Neutral Position
Switch DLC3
Air Injection Driver
(AID)
Accelerator Pedal Assembly
(Accelerator Pedal Position
Sensor)
Fuel Pump
VVT Sensor (Bank 2)
VVT Sensor (Bank 1) OCV (Bank 2)
OCV (Bank 1) Air Pump
Air Switching Valve No.2
(ASV No.2) (Bank 1)
Air Switching Valve
(ASV) Air Switching Valve No.2
(ASV No.2) (Bank 2)
VSV for Air Injection
Contorl (Bank 1)
VSV for Air Injection
Contorl (Bank 2)ACIS VSVCharcoal Canister Assembly
± DIAGNOSTICSENGINE
DI±5
199 Author: Date:
2005 SEQUOIA (RM1146U)
LOCATION

B17430
HA1A
A1A+
A1A±
HA2A
A2A+
A2A±
HT1B
OXIB
HT2B
OX2B
E2
PRG
ACIS
AIV1
AIV2
THA
E2G
VG
E2
THW
PPMP
VPMP
MPMP#10
#20
#30
#40
#50
#60
#70
#80
IGT1
IGT2
IGT3
IGT4
IGT5
IGT6
IGT7
IGT8
IGF1
IGF2 To A/F Relay
A/F Sensor
(Bank 1 Sensor 1)
A/F Sensor
(Bank 2 Sensor 1)
HO2 Sensor
(Bank 1 Sensor 2)
HO2 Sensor
(Bank 2 Sensor 2) To EFI Relay
To EFI No.2
Fuse
VSV (EVAP)
VSV (ACIS)
VSV (AI Control)
VSV (AI Control)
Mass Air Flow
Meter
ETC Sensor
Pump Modul
Pressure
Sensor
Control
Valve To VC
TerminalTo Battery
IGN2
Fuel Injector #1
Fuel Injector #2
Fuel Injector #3
Fuel Injector #4
Fuel Injector #5
Fuel Injector #6
Fuel Injector #7
Fuel Injector #8
Ignition Coil and
Igniter No.1
Ignition Coil and
Igniter No.2
Ignition Coil and
Igniter No.3
Ignition Coil and
Igniter No.4
Ignition Coil and
Igniter No.5
Ignition Coil and
Igniter No.6
Ignition Coil and
Igniter No.7
Ignition Coil and
Igniter No.8
± DIAGNOSTICSENGINE
DI±7
201 Author: Date:
2005 SEQUOIA (RM1146U)

± DIAGNOSTICSENGINE
DI±13
207 Author: Date:
2005 SEQUOIA (RM1146U)
4 Check air filter.
PREPARATION:
Remove the air filter.
CHECK:
Visual check that the air filter is not excessively dirty or oily.
NG Repair or replace
air filter.
OK
5 Check idle speed (See page EM±11).
NG Proceed to problem symptoms table on page
DI±33.
OK
6 Check fuel pressure (See page SF±7).
NG Proceed to page SF±7 and continue to trouble-
shoot.
OK
7 Check for spark (See page IG±1).
NG Proceed to page IG±1 and continue to trouble-
shoot.
OK
Proceed to problem symptoms table on page
DI±33.

DI±56
± DIAGNOSTICSENGINE
250 Author: Date:
2005 SEQUOIA (RM1146U) VVT CTRL B1
Turn on and off OCV
(Oil Control Valve)ON/OFF

Engine stalls or idles roughly
when OCV turned ON

Normal engine running or idling
when OCV off
VVT CTRL B2Turn on and off OCV
(Oil Control Valve)ON/OFF

Engine stalls or idles roughly
when OCV turned ON

Normal engine running or idling
when OCV off
A/C CUT SIGControl A/C cut signalON/OFF±
FUEL PUMP/SPDActivate fuel pump (C/OPN Relay)ON/OFF±
TC/TE1Turn on and off TC and TE1 con-
nectionON/OFF
ON: TC and TE1 connected

OFF: TC and TE1 disconnected
FC IDL PROHBTProhibit idling fuel cut controlON/OFF±
ETCS OPEN SLOWThrottle actuatorON: throttle valve opens slowly
This test is possible when the fol-
lowing conditions are met:

Ignition switch ON

Engine does not start

Fully depressing accelerator ped-
al (APP: 58 degrees or more)
ETCS CLOSE SLOWThrottle actuatorON: throttle valve closes slowlySame as above
ETCS OPEN FASTThrottle actuatorON: throttle valve opens fastSame as above
ETCS CLOSE FASTThrottle actuatorON: throttle valve closes fastSame as above
FUEL CUT #1Cylinder #1 injector fuel cutON/OFFThis test is possible during vehicle
stopping and engine idling.
FUEL CUT #2Cylinder #2 injector fuel cutON/OFFSame as above
FUEL CUT #3Cylinder #3 injector fuel cutON/OFFSame as above
FUEL CUT #4Cylinder #4 injector fuel cutON/OFFSame as above
FUEL CUT #5Cylinder #5 injector fuel cutON/OFFSame as above
FUEL CUT #6Cylinder #6 injector fuel cutON/OFFSame as above
FUEL CUT #7Cylinder #7 injector fuel cutON/OFFSame as above
FUEL CUT #8Cylinder #8 injector fuel cutON/OFFSame as above
VENT VALVE (ALONE)Activate vent valve
(built into pump module)ON/OFF±
VCUUM PUMPActivate vacuum pump
(built into pump module)ON/OFF±