2001 TOYOTA SEQUOIA mirror

± DIAGNOSTICSBODY CONTROL SYSTEM
DI±1695
1889 Author: Date:
2005 SEQUOIA (RM1146U)MIRR POS SW L
Remote control mirror switch L
position/ON or OFF
ON: Remote control mirror switch
L position is selected
OFF: Remote control mirror switch
L position is not selected
±
MIRR POS SW UPRemote control mirror switch UP
position/ON or OFF
ON: Remote control mirror switch
UP position is selected
OFF: Remote control mirror switch
UP position is not selected
±
MIRR POS SW DWNRemote control mirror switch
DOWN position/ON or OFF
ON: Remote control mirror switch
DOWN position is selected
OFF: Remote control mirror switch
DOWN position is not selected
±
AUTO LIGHT SWLight control switch (AUTO)/ON or
OFF
ON: Light control switch position is
AUTO
OFF: Light control switch position
is not AUTO
±
HEAD LIGHT SWLight control switch (HEAD)/ON or
OFF
ON: Light control switch position is
HEAD
OFF: Light control switch position
is not HEAD
±
TAIL LIGHT SWLight control switch (TAIL)/ON or
OFF
ON: Light control switch position is
TAIL
OFF: Light control switch position
is not TAIL
±
ILLUMINATE RATEIllumination rate information/
MIN: 0 MAX: 99.99Condition value will be displayed
Normal value: 0.8 ms to 22.0 ms±
SEAT M1 SWMemory seat switch (M1)/ON or
OFF
ON: Memory seat switch position
is M1
OFF: Memory seat switch position
is not M1
±
SEAT M2 SWMemory seat switch (M2)/ON or
OFF
ON: Memory seat switch position
is M2
OFF: Memory seat switch position
is not M2
±
SEAT SET SWMemory seat switch (SET)/ON or
OFF
ON: Memory seat switch position
is SET
OFF: Memory seat switch position
is not SET
±
GLS BRK DETECTGlass breakage sensor/ON or
OFF
ON: Glass breakage sensor oper-
ates
OFF: Glass breakage sensor does
not operate
±
WIRELESS OPERWireless door lock control func-
tion/ON or OFF
ON: Wireless door lock function
operated
OFF: Wireless door lock function
not operated
±
OPEN DOOR WARNDOOR indicator light/ON or OFFON: Any door is open
OFF: All doors are closed±
AUTO LOCK DELAYAuto lock delay/60s or 30sCustomized value will be dis-
played±
UNLOCK/2OPER2 time operation wireless unlock
signal/ON or OFFCustomized condition will be dis-
played±

DI94R±07
I28393
Hood Courtesy Switch Engine Room J/B
 ECU±B Fuse
 Door No. 2 Fuse
 H±LP RH Fuse (*2)
 H±LP LH Fuse (*2)
 DRL Fuse (*1)
Rear Washer Motor
Horn
Headlight
Rear washer switch
Ignition Switch
 Key Unlock Switch
DLC3 Body ECU
Instrument Panel J/B
 ECU±IG Fuse
 RAD No. 2 Fuse
 FOG Fuse
 FOG LIGHT Relay
 POWER MAIN Relay
 WSH Fuse
 STOP Fuse
 TAILLIGHT Relay Back Door Power
Window SwitchTheft Horn
Engine Room R/B
No.2
 DIMMER Relay
 DRL No. 4 Relay
 H±LP RH Fuse (*1)
 H±LP LH Fuse (*1)
 H±LP RL Fuse (*1)
 H±LP LL Fuse (*1)
Fog Light
Wireless Door
Control Receiver Wireless Door Lock Buzzer
Combination Meter Memory Seat Switch
(*1): w/ Daytime Running Light
(*2): w/o Daytime Running Light (Located behind
the instrument panel)
(Located behind
the heater control panel)
 DOME Fuse
 HEAD Relay
 HORN Relay
 DOME Fuse
Automatic Light Control Sensor
Stop Light Switch
Remote Control Mirror SwitchGlass Breakage
Sensor Microphone Glass Breakage
Sensor ECU
Combination Switch
 Light Control Switch
 Headlight Dimmer Switch
 Fog Light Switch DI±1698
± DIAGNOSTICSBODY CONTROL SYSTEM
1892 Author: Date:
2005 SEQUOIA (RM1146U)
PARTS LOCATION

± DIAGNOSTICSBODY CONTROL SYSTEM
DI±1767
1961 Author: Date:
2005 SEQUOIA (RM1146U)
Remote control mirror switch circuit (w/ Driving position memory)
CIRCUIT DESCRIPTION
The remote control mirror switch has different levels of resistance depending on the switch position.
The body ECU senses the switch position through the resistance of the remote control mirror switch.
The body ECU sends an up/down/right/left signal to the driver door ECU and the passenger door ECU via
BEAN.
The mirror's driving position and retract position are directly controlled by the remote control mirror switch.
DID9C±01

I28524
AB
C D F P 1
2 3
45 6
7828 2930
8
7 11
6 20
13
14 13
14PP P±L
A
BBB Y Y
Y Y M+
MSW
E
B
MF8
MR
E2 R5
Remote Control
Mirror Switch
Body ECU
MIRB
MIRS
MIRE G±B
LG±B
Instrument Panel J/B
J14 J15J/C
1C 1E
1L
1C
12CIG
AM1 F10
FL BlockI18
Ignition Switch
R18
Remote Control Mirror RHB5
B5
B5
LGLG
LG
LG W±B
IMMF MRJ6
J6
J6
J6J7
J7AM1 ACC
13
W±L W ALT
B
II1
II1
R17
Remote Control Mirror LH
Battery *1 *1J/C
(*1): Control Circuit
MF MR
DI±1768
± DIAGNOSTICSBODY CONTROL SYSTEM
1962 Author: Date:
2005 SEQUOIA (RM1146U)
WIRING DIAGRAM

± DIAGNOSTICSBODY CONTROL SYSTEM
DI±1769
1963 Author: Date:
2005 SEQUOIA (RM1146U)
INSPECTION PROCEDURE
HINT:
When using the hand±held tester, start the inspection from step 1 and when not using the hand±held tester,
start from step 2.
1 Check remote mirror control switch using hand±held tester.
PREPARATION:
(a) Connect the hand±held tester to the DLC3.
(b) Turn the ignition switch ON.
CHECK:
According to the display on the tester, read the ºDATA LISTº.
BODY ECU:
ItemMeasurement Item/Display
(Range)Normal ConditionDiagnostic Note
MIRR SEL SW RRemote control mirror switch pas-
senger side/ON or OFF
ON: Remote control mirror switch
passenger side is selected
OFF: Remote control mirror switch
passenger side is not selected
±
MIRR SEL SW LRemote control mirror switch driv-
er side/ON or OFF
ON: Remote control mirror switch
driver side is selected
OFF: Remote control mirror switch
driver side is not selected
±
MIRR POS SW RRemote control mirror switch R
position/ON or OFF
ON: Remote control mirror switch
R position is selected
OFF: Remote control mirror switch
R position is not selected
±
MIRR POS SW LRemote control mirror switch L
position/ON or OFF
ON: Remote control mirror switch
L position is selected
OFF: Remote control mirror switch
L position is not selected
±
MIRR POS SW UPRemote control mirror switch UP
position/ON or OFF
ON: Remote control mirror switch
UP position is selected
OFF: Remote control mirror switch
UP position is not selected
±
MIRR POS SW DWNRemote control mirror switch
DOWN position/ON or OFF
ON: Remote control mirror switch
DOWN position is selected
OFF: Remote control mirror switch
DOWN position is not selected
±
OK:
The indication on the tester switches between ON and OFF in accordance with the remote con-
trol mirror switch status.
OK Proceed to next circuit inspection shown in
problem symptoms table (See page DI±1686).
NG

DI±1770
± DIAGNOSTICSBODY CONTROL SYSTEM
1964 Author: Date:
2005 SEQUOIA (RM1146U)
2 Check remote control mirror switch (See page BE±115).
NG Replace remote control mirror switch.
OK
3 Check voltage between remote control mirror switch and battery, remote control
mirror switch and body ground.
PREPARATION:
(a) Disconnect the remote control mirror switch connector.
(b) Turn the ignition switch ON.
CHECK:
Measure the voltage between terminals R5±6 (B) and R5±2 (E) of the remote control mirror switch.
OK:
Voltage: 10 to 14 V
NG Repair or replace harness or connector.
OK
4 Check wire harness and connector between remote control mirror switch and re-
mote control mirror (See page IN±35).
NG Repair or replace harness or connector.
OK
5 Check retract motor operation (See page BE±115).
NG Replace remote control mirror.
OK

± DIAGNOSTICSBODY CONTROL SYSTEM
DI±1771
1965 Author: Date:
2005 SEQUOIA (RM1146U)
6 Check wire harness and connector between remote control mirror switch and re-
mote control mirror (See page IN±35).
NG Repair or replace harness or connector.
OK
Proceed to next circuit inspection shown in
problem symptoms table
(See page DI±1686).

I28525
D24
Driving Position
Memory Switch
MM
M1
M2 Body ECU
B624
1
2
3 MRY
M1
M2 SET
J8 J/C
IEW±BAB6
B623
22
41
2L
L±Y
G
E DI±1772
± DIAGNOSTICSBODY CONTROL SYSTEM
1966 Author: Date:
2005 SEQUOIA (RM1146U)
Driving position memory switch circuit (w/ Driving position
memory)
CIRCUIT DESCRIPTION
The position control ECU & switch assy memorizes the driver seat position and the outer mirror positions.
It controls each motor when the driving position memory switch is operated.
The position signals of the driving position memory switch received by the body ECU are sent to the position
control ECU and switch assy via BEAN.
WIRING DIAGRAM
DID9D±01