2001 TOYOTA SEQUOIA seat memory

DI3IR±10
± DIAGNOSTICSMULTIPLEX COMMUNICATION SYSTEM
DI±1905
2099 Author: Date:
2005 SEQUOIA (RM1146U)
DIAGNOSTIC TROUBLE CODE CHART
If a trouble code is indicated during the DTC check, check the components listed for that code in the table
below (proceed to the page given for that code).
DTC No.
(See Page)Detection ItemTrouble Area
B1211
(DI±1908)Driver door ECU communication stop

Driver door ECU

Wire harness

Body ECU
B1212
(DI±1911)Front passenger door ECU communication stop

Passenger door ECU

Wire harness

Body ECU
B1214
B1215
(DI±1914)Communication bus malfunction (Short to B+)
Communication bus malfunction (Short to ground)

Driver door ECU

Passenger door ECU

Back door ECU

A/C ECU (Integration control panel)

Combination meter

Memory seat ECU & switch

Wire harness

Body ECU
B1221
(DI±1924)Power window switch circuit on driver door

Power window master switch (Built in driver door ECU)

Wire harness

Body ECU
B1222
(DI±1925)Door lock switch circuit on driver door

Door lock control switch front LH (Built in driver door ECU)

Door unlock detection switch front LH

Wire harness

Body ECU
B1223
(DI±1926)Power window switch circuit on passenger door

Power window switch (Built in passenger door ECU)

Wire harness

Body ECU
B1224
(DI±1927)Door lock switch circuit on passenger door

Door lock control switch front RH (Built in passenger door
ECU)

Door unlock detection switch front RH

Wire harness

Body ECU
B1231
(DI±1928)Jam protection limit switch circuit on driver door

Limit switch (Built in power window motor)

Driver door ECU

Wire harness

Body ECU
B1232
(DI±1929)Jam protection pulse switch circuit on driver door

Pulse switch (Built in power window motor)

Driver door ECU

Wire harness

Body ECU
B1233
(DI±1930)Jam protection limit switch circuit on passenger door

Limit switch (Built in power window motor)

Passenger door ECU

Wire harness

Body ECU
B1234
(DI±1931)Jam protection pulse switch circuit on passenger door

Pulse switch (Built in power window motor)

Passenger door ECU

Wire harness

Body ECU
B1241
(DI±1932)Body ECU switch circuit diagnosis

Back door power window switch

Rear wiper and washer switch

Wire harness

Body ECU

DI±1906
± DIAGNOSTICSMULTIPLEX COMMUNICATION SYSTEM
2100 Author: Date:
2005 SEQUOIA (RM1146U)B1242
(DI±1933)
Wireless door lock tuner circuit malfunction

Wireless door lock control receiver

Wire harness

Body ECU
B1243
(DI±1935)GSW terminal circuit malfunction

Airbag sensor assembly

Wire harness

Body ECU
B1244
(DI±1937)Light sensor circuit malfunction

Automatic light control sensor

Wire harness

Body ECU
B1262
(DI±1940)A/C ECU communication stop

A/C ECU (Integration control and panel)

Wire harness

Body ECU
B1271
(DI±1943)Combination meter ECU communication stop

Combination meter

Wire harness

Body ECU
B1272
(DI±1946)Memory seat ECU communication stop
(w/ Driving position memory)
Memory seat ECU & switch

Wire harness

Body ECU
B1273
(DI±1949)Sliding roof ECU communication stop
(w/ Sliding roof)
Sliding roof ECU

Wire harness

Body ECU
B1287
(DI±1952)Back door ECU communication stop

Back door ECU

Wire harness

Body ECU
HINT:

When either DTC B1214 or B1215 is output, a DTC for another ECU communication stop may also
be output. In this case, perform troubleshooting for DTC B1214 or B1215 first. DTC B1214 or B1215
is output when a short to +B or short to ground occurs on a communication bus.

DTCs from B1221 to B1241 do not indicate that the corresponding switch is abnormal. They notify how
the switch is operating.
If the corresponding DTC is not indicated when operating a switch, there is a problem with the switch
contact.
If a DTC is indicated when not operating switches, the corresponding switch is stuck.

DI3IS±11
I27730
Instrument Panel J/B
Passenger Door ECU
(Power Window Switch) Combination Meter
Sliding Roof ECUDLC3 Body ECU
(Located behind
the instrument panel)
Driver Door ECU
(Power Window
Master Switch)
Back Door ECU
(Located inside the back door trim board) Automatic Light Control Sensor
Memory Seat ECU
& SwitchAirbag
Sensor
Assy
Power Window
Motor Front RH

Limit Switch

Pulse Switch Power Window
Motor Front LH

Limit Switch

Pulse Switch
A/C ECU
(Integration Control and Panel)
± DIAGNOSTICSMULTIPLEX COMMUNICATION SYSTEM
DI±1907
2101 Author: Date:
2005 SEQUOIA (RM1146U)
PARTS LOCATION

DI±1914
± DIAGNOSTICSMULTIPLEX COMMUNICATION SYSTEM
2108 Author: Date:
2005 SEQUOIA (RM1146U)
DTC B1214 Communication bus malfunction
(Short to B+)
DTC B1215 Communication bus malfunction
(Short to ground)
CIRCUIT DESCRIPTION
DTC B1214 or B1215 is detected when a short to +B or short to ground occurs on the multiplex communica-
tion bus (BEAN). Detecting this condition will disable the multiplex communication bus (BEAN) and output
the corresponding DTC.
DTC NO.DTC detecting conditionTrouble area
B1214Short to B+ in multiplex communication system communica-
tion circuit

Driver door ECU

Passenger door ECU

Back door ECU

A/C ECU (Integration control panel)

Combination meter

Memory seat ECU & switch

Wire harness

Body ECU
B1215Short to ground in multiplex communication system commu-
nication circuit

Driver door ECU

Passenger door ECU

Back door ECU

A/C ECU (Integration control panel)

Combination meter

Memory seat ECU & switch

Wire harness

Body ECU
DI94Y±07

I28465
D22
Driver Door ECU
S19
Sliding Roof
Control ECU
Combination MeterI19
A/C ECU
(Integration Control and Panel)
Memory Seat ECU
& SwitchBody ECU
J/C
Back Door ECU
F18
Passenger
Door ECUInstrument Panel J/B
J/CIB1
1M 1GB7
B7
B5
M6 C5
II2J33 J34 BI2
BD2 BF1
B11 C5
C5
B11 J33 J34
BD2 BF1 II2 J33 J34 IB1MPX1
MPX2 MPX3 MPX1MPX2
MPX1
MPX1
MPX2 MPX1
MPX2
MPX1MPX±MPX+ W±L
G±B
G±O
LG±B L±Y
LG±RWW±L
G±O
W
LG±RLG±R
BLG±R
BBB B B
A G H A
G W
(*2)
10
8 11 (*2)
21
14762 4
G±B171 3 1324 31
32
30 8(*3)
(*1)
(*1) (*1)(*3) 3
9
1220 22
8
20
2
G±B
(*1): w/ Driving Position Memory
(*2): w/o Driving Position Memory
(*3): w/ Sliding Roof 8 (*1)(*1)
20
± DIAGNOSTICSMULTIPLEX COMMUNICATION SYSTEM
DI±1915
2109 Author: Date:
2005 SEQUOIA (RM1146U)
WIRING DIAGRAM

± DIAGNOSTICSMULTIPLEX COMMUNICATION SYSTEM
DI±1921
2115 Author: Date:
2005 SEQUOIA (RM1146U)
12 Check the communication circuit inside the memory seat ECU & switch.
PREPARATION:
(a) Reconnect connector ºI19º of the integration control and panel.
(b) Reconnect connector ºB5º of the body ECU.
(c) Disconnect connector ºM6º of the memory seat ECU & switch.
CHECK:
Check the DTC (See page DI±1904).
OK:
DTCs B1214 and/or B1215 are not indicated.
HINT:
Ignore any codes other than DTCs B1214 and B1215.
OK Replace the memory seat ECU & switch.
NG
13 Check for a short circuit between the memory seat ECU and switch & combina-
tion meter.
PREPARATION:
Disconnect connector ºC5º of the combination meter.
CHECK:
Measure the resistance according to the value(s) in the table below.
OK:
Symbols (Tester connection)ConditionSpecified condition
MPX1 (M6±1) ± Body groundAlways10 kW or higher
NG Repair or replace the wire harness between the
memory seat ECU & switch and combination
meter.
OK

DI±1922
± DIAGNOSTICSMULTIPLEX COMMUNICATION SYSTEM
2116 Author: Date:
2005 SEQUOIA (RM1146U)
14 Check the communication circuit inside the combination meter ECU.
PREPARATION:
(a) Reconnect connector ºM6º of the memory seat ECU & switch (only vehicles w/ driving position
memory).
(b) Reconnect connector ºI19º of the integration control and panel (only vehicles w/o driving position
memory).
(c) Reconnect connector ºB5º of the body ECU (only vehicles w/o driving position memory).
(d) Disconnect connector ºC5º of the combination meter ECU (only vehicles w/o driving position memory).
CHECK:
Check the DTC (See page DI±1904).
OK:
DTCs B1214 and/or B1215 are not indicated.
HINT:
Ignore any codes other than DTCs B1214 and B1215.
OK Replace the combination meter ECU.
NG
15 Check for a short circuit between the combination meter ECU and back door
ECU.
PREPARATION:
Disconnect connector ºB11º of the back door ECU.
CHECK:
Check the DTC (See page DI±1904).
OK:
DTCs B1214 and/or B1215 are not indicated.
HINT:
Ignore any codes other than DTCs B1214 and B1215.
OK Repair or replace the wire harness between the
combination meter ECU and back door ECU.
NG

DI±1946
± DIAGNOSTICSMULTIPLEX COMMUNICATION SYSTEM
2140 Author: Date:
2005 SEQUOIA (RM1146U)
DTC B1272 Memory seat ECU communication stop (w/
Driving position memory)
CIRCUIT DESCRIPTION
This DTC is indicated when communication fails between the memory seat ECU & switch and body ECU.
DTC No.DTC Detecting ConditionTrouble Area
B1272No communication from memory seat ECU & switch for more
than 10 seconds.
Memory seat ECU & switch

Wire harness

Body ECU
DIDFK±01