2001 DODGE RAM boot

(4) Install the screws attaching the console to
mounting brackets.
(5) Install the transmission shifter boot, (Refer to
23 - BODY/INTERIOR/SHIFT BOOT - INSTALLA-
TION).
(6) Install the transfer case shifter boot, if
equipped. (Refer to 23 - BODY/INTERIOR/SHIFT
BOOT - INSTALLATION).
(7) Install cup holder in console, if equipped.
CARPETS AND FLOOR MATS
REMOVAL
STANDARD CAB
(1) Remove seat (Refer to 23 - BODY/SEATS/SEAT
- BENCH SEAT - REMOVAL) or(Refer to 23 - BODY/
SEATS/SEAT - SPLIT BENCH - REMOVAL).
(2) Remove door sill covers (Refer to 23 - BODY/
INTERIOR/DOOR SILL TRIM - REMOVAL).
(3) Remove cowl trim covers (Refer to 23 - BODY/
INTERIOR/COWL TRIM COVER - REMOVAL).
(4) Remove center console, if equipped.(Refer to 23
- BODY/INTERIOR/CENTER CONSOLE -
REMOVAL)
(5) If not equipped with a center console remove
the transfer case shifter boot (Refer to 23 - BODY/IN-
TERIOR/SHIFT BOOT/TRANSFER CASE - REMOV-
AL).
(6) Remove rear stowage tray (Refer to 23 - BODY/
INTERIOR/REAR FLOOR STOWAGE TRAY -
REMOVAL).
(7) Remove rear closure panel trim (Refer to 23 -
BODY/INTERIOR/REAR CLOSURE PANEL TRIM -
REMOVAL).
(8) Fold carpet or mat toward center of cab.
(9) Remove carpet or mat through door opening
(Fig. 11).
QUAD/CLUB CABS
(1) Remove front and rear seats. (Refer to 23 -
BODY/SEATS/SEAT - BENCH SEAT - REMOVAL)
or(Refer to 23 - BODY/SEATS/SEAT - SPLIT BENCH
- REMOVAL) and (Refer to 23 - BODY/SEATS/REAR
SEAT - REMOVAL)
(2) Remove door sill covers (Refer to 23 - BODY/
INTERIOR/DOOR SILL TRIM - REMOVAL).
(3) Remove center console, if equipped.(Refer to 23
- BODY/INTERIOR/CENTER CONSOLE -
REMOVAL)
(4) If not equipped with a center console remove
the transfer case shifter boot (Refer to 23 - BODY/IN-
TERIOR/SHIFT BOOT/TRANSFER CASE - REMOV-
AL).
(5) Remove emergency jack tool kit.(6) Remove rear seat belt buckles. (Refer to 8 -
ELECTRICAL/RESTRAINTS/SEAT BELT BUCKLE -
REMOVAL)
(7) Remove rear closure panel trim (Refer to 23 -
BODY/INTERIOR/REAR CLOSURE PANEL TRIM -
REMOVAL).
(8) Remove C-pillar trim panels. (Refer to 23 -
BODY/INTERIOR/C-PILLAR TRIM - REMOVAL)
(9) Remove the quarter trim panels. (Refer to 23 -
BODY/INTERIOR/QUARTER TRIM PANEL -
REMOVAL)
(10) Fold carpet or mat toward center of cab.
(11) Remove carpet or mat through door opening.
INSTALLATION
STANDARD CAB
(1) Position carpet or mat in vehicle and align all
holes (Fig. 11).
(2) Install rear closure panel trim (Refer to 23 -
BODY/INTERIOR/REAR CLOSURE PANEL TRIM -
INSTALLATION).
(3) Install rear stowage tray (Refer to 23 - BODY/
INTERIOR/REAR FLOOR STOWAGE TRAY -
INSTALLATION).
(4) Install the transfer case shifter boot if not
equipped with a center console. (Refer to 23 - BODY/
INTERIOR/SHIFT BOOT/TRANSFER CASE -
INSTALLATION)
(5) Install the center console, if equipped. (Refer to
23 - BODY/INTERIOR/CENTER CONSOLE -
INSTALLATION)
(6) Install cowl trim covers (Refer to 23 - BODY/
INTERIOR/COWL TRIM COVER - INSTALLATION).
Fig. 11 Floor Carpet or Mat
1 - CARPET OR MAT
2 - FLOOR PAN
3 - REAR/INNER SEAT MOUNT
4 - POWER SEAT HARNESS
BR/BEINTERIOR 23 - 123
CENTER CONSOLE (Continued)

(7) Install door sill covers (Refer to 23 - BODY/IN-
TERIOR/DOOR SILL TRIM - INSTALLATION).
(8) Install seat, (Refer to 23 - BODY/SEATS/SEAT
- INSTALLATION) or (Refer to 23 - BODY/SEATS/
SEAT/SPLIT BENCH - INSTALLATION).
QUAD/CLUB CABS
(1) Position carpet or mat in vehicle.
(2) Install quarter trim panels. (Refer to 23 -
BODY/INTERIOR/QUARTER TRIM PANEL -
INSTALLATION)
(3) Install rear seat belt buckles.
(4) Install the C-pillar trim panels, if equipped.
(Refer to 23 - BODY/INTERIOR/C-PILLAR TRIM -
INSTALLATION)
(5) Install rear closure panel trim (Refer to 23 -
BODY/INTERIOR/REAR CLOSURE PANEL TRIM -
INSTALLATION).
(6) Install the rear seat belt buckles. (Refer to 8 -
ELECTRICAL/RESTRAINTS/SEAT BELT BUCKLE -
INSTALLATION)
(7) Install emergency jack tool kit.
(8) Install the transfer case shifter boot if not
equipped with a center console. (Refer to 23 - BODY/
INTERIOR/SHIFT BOOT/TRANSFER CASE -
INSTALLATION)
(9) Install the center console, if equipped. (Refer to
23 - BODY/INTERIOR/CENTER CONSOLE -
INSTALLATION)
(10) Install floor shift boot, if equipped.
(11) Install cowl trim covers (Refer to 23 - BODY/
INTERIOR/COWL TRIM COVER - INSTALLATION).
(12) Install door sill covers (Refer to 23 - BODY/
INTERIOR/DOOR SILL TRIM - INSTALLATION).
(13) Install front and rear seats. (Refer to 23 -
BODY/SEATS/SEAT - BENCH SEAT - INSTALLA-
TION) or (Refer to 23 - BODY/SEATS/SEAT - SPLIT
BENCH - INSTALLATION) and (Refer to 23 - BODY/
SEATS/REAR SEAT - INSTALLATION)
ASSIST HANDLE
REMOVAL
(1) Disengage tabs attaching assist handle end
covers to assist handle.
(2) Remove screws attaching overhead assist han-
dle to roof rail (Fig. 12).
(3) Separate overhead assist handle from vehicle.
INSTALLATION
(1) Position assist handle on vehicle.
(2) Install screws attaching overhead assist handle
to roof rail (Fig. 12).
(3) Install tabs attaching assist handle end covers
to assist handle.
COAT HOOK
REMOVAL
(1) Insert a small flat blade into the tip of the
hook.
(2) Carefully pry outward to separate the coat
hook from coat hook base.
(3) Pull coat hook out of roof panel (Fig. 13).
Extended cab shown, standard cab similar.
Fig. 12 Overhead Assist Handle
1 - CAB ASSEMBLY
2 - SCREW
3 - ASSIST HANDLE
4 - TRIM COVER
Fig. 13 Coat HookÐClub/Quad Cab
1 - COAT HOOK
23 - 124 INTERIORBR/BE
CARPETS AND FLOOR MATS (Continued)

UNDER VEHICLE
INSPECTION - TIRE PRESSURES
(1) Using the tire placard or the Safety Certifica-
tion Label, check that the correct tires are mounted
on the vehicle.
(2) Install valve stem extensions as required.
(3) Using the tire placard or the Safety Certifica-
tion Label, check tire pressure (including spare) and
adjust as required to recommended pressure.
(4) Inspect the spare tire for correct pressure and
proper mounting (Fig. 13).
NOTE: Tire pressure may have been set above nor-
mal during manufacturing in order to properly seat
the tire bead. Be sure to adjust to proper specifica-
tion.
INSPECTION - VISUAL
CAUTION: Before raising the vehicle on a hoist,
(Refer to LUBRICATION & MAINTENANCE/HOISTING
- STANDARD PROCEDURE) for the proper lifting
points.
(1) Visually inspect the following for loose attach-
ment, leakage, clearance and routing, and tighten
connections and clamps as required:
²Engine
²Oil Cooler
²Cooling System
²Transmission
²Driveshaft Boots²Differential
²Transfer Case (Fig. 19)
²Transmission Cooler and Lines (Fig. 18)
²Brake System and Lines (Fig. 14)
²Fuel System
²Exhaust System (Fig. 15), (Fig. 16) and (Fig. 17)
²Steering and Suspension Components
Fig. 13 SPARE TIRE INSPECTION
Fig. 14 BRAKE LINES TO CALIPERS (REAR)
Fig. 15 EXHAUST CLAMPS
30 - 8 NEW VEHICLE PREPARATIONBR/BE

BODY CONTROL/CENTRAL TIMER
MODULE - INSTALLATION...............8E-6
BODY CONTROL/CENTRAL TIMER
MODULE - OPERATION.................8E-3
BODY CONTROL/CENTRAL TIMER
MODULE - REMOVAL..................8E-5
BODY GAP AND FLUSH
MEASUREMENTS, SPECIFICATIONS......23-56
BODY OPENING DIMENSIONS,
SPECIFICATIONS.....................23-60
BODY SEALER LOCATIONS,
SPECIFICATIONS.....................23-47
BODY SEALING - INSPECTION..........30-10
BODY SIDE MOLDINGS - INSTALLATION . . 23-87
BODY SIDE MOLDINGS - REMOVAL......23-87
BODY STRIPES AND DECALS -
INSTALLATION.......................23-87
BODY STRIPES AND DECALS -
REMOVAL..........................23-87
BODY VENT - INSTALLATION..........23-126
BODY VENT - REMOVAL..............23-126
BOOST PRESSURE - DIAGNOSIS AND
TESTING...........................14-89
BOOSTER - DIAGNOSIS AND TESTING,
HYDRAULIC..........................5-17
BOOSTER - DIAGNOSIS AND TESTING,
MASTER CYLINDER/POWER.............5-29
BOOSTER - INSTALLATION, POWER
BRAKE..............................5-20
BOOSTER - REMOVAL, POWER BRAKE....5-19
BOOT - INSTALLATION, 4WD FLOOR
SHIFT..............................23-122
BOOT - MANUAL TRANSMISSION -
INSTALLATION, SHIFT................23-122
BOOT - MANUAL TRANSMISSION -
REMOVAL, SHIFT....................23-122
BOOT - REMOVAL, 4WD FLOOR SHIFT . . . 23-122
BORE, DE-GLAZE - STANDARD
PROCEDURE-CYLINDER...............9-264
BORE HONING - STANDARD
PROCEDURE, CYLINDER . . 9-10,9-126,9-180,9-69
BORE REPAIR - STANDARD
PROCEDURE, CAM...................9-267
BORE REPAIR - STANDARD
PROCEDURE, CYLINDER...............9-265
BOX - ASSEMBLY, GLOVE.............23-112
BOX - DISASSEMBLY, GLOVE..........23-112
BOX - INSTALLATION, CARGO..........23-97
BOX - INSTALLATION, GLOVE..........23-113
BOX - REMOVAL, CARGO..............23-96
BOX - REMOVAL, GLOVE.............23-112
BOX LAMP AND SWITCH -
INSTALLATION, GLOVE................8L-35
BOX LAMP AND SWITCH - REMOVAL,
GLOVE.............................8L-35
BOX LATCH STRIKER - INSTALLATION,
GLOVE............................23-113
BOX LATCH STRIKER - REMOVAL,
GLOVE............................23-113
BOX OPENING UPPER TRIM -
INSTALLATION, GLOVE...............23-114
BOX OPENING UPPER TRIM - REMOVAL,
GLOVE............................23-114
B-PILLAR DOOR SEAL - INSTALLATION . . 23-152
B-PILLAR DOOR SEAL - REMOVAL......23-152
B-PILLAR TRIM - INSTALLATION
.......23-120
B-PILLAR TRIM - REMOVAL
...........23-120
BR PAINT COLOR CODES,
SPECIFICATIONS - 2001
..............23-129
BRACKET - INSTALLATION, CAB
CHASSIS ADAPTER
....................13-9
BRACKET - INSTALLATION, REARVIEW
MIRROR SUPPORT
..................23-126
BRACKET - REMOVAL, CAB CHASSIS
ADAPTER
............................13-9
BRAKE - DESCRIPTION, CONTROLLER
ANTILOCK
..........................8E-11
BRAKE - INSPECTION, PARKING
.........30-17
BRAKE - INSTALLATION, CONTROLLER
ANTILOCK
..........................8E-12
BRAKE - OPERATION, CONTROLLER
ANTILOCK
..........................8E-11
BRAKE - REMOVAL, CONTROLLER
ANTILOCK
..........................8E-12
BRAKE BOOSTER - INSTALLATION,
POWER
.............................5-20
BRAKE BOOSTER - REMOVAL, POWER
....5-19BRAKE CABLE - 2500/3500 WITH REAR
DISC BRAKES - INSTALLATION, REAR
PARK...............................5-38
BRAKE CABLE - 2500/3500 WITH REAR
DISC BRAKES - REMOVAL, REAR
PARK...............................5-37
BRAKE CABLE - INSTALLATION, FRONT
PARKING............................5-39
BRAKE CABLE - REMOVAL, FRONT
PARKING............................5-37
BRAKE CABLE 2500/3500 SERIES WITH
DRUM BRAKES - INSTALLATION, REAR
PARK...............................5-39
BRAKE CABLES - 1500 SERIES -
INSTALLATION, REAR PARK.............5-39
BRAKE CABLES - 1500 SERIES -
REMOVAL, REAR PARK.................5-37
BRAKE CABLES 2500/3500 SERIES WITH
DRUM BRAKES - REMOVAL, REAR
PARK...............................5-38
BRAKE CALIPERS - ASSEMBLY, DISC......5-12
BRAKE CALIPERS - CLEANING, DISC......5-12
BRAKE CALIPERS - DISASSEMBLY, DISC . . . 5-11
BRAKE CALIPERS - INSPECTION, DISC....5-12
BRAKE DRUM - ADJUSTMENT, REAR......5-34
BRAKE DRUM - DIAGNOSIS AND
TESTING............................5-33
BRAKE DRUM MACHINING - STANDARD
PROCEDURE.........................5-33
BRAKE FLUID CONTAMINATION -
DIAGNOSIS AND TESTING..............5-14
BRAKE FLUID LEVEL - STANDARD
PROCEDURE.........................5-14
BRAKE FLUID, SPECIFICATIONS..........5-15
BRAKE INDICATOR - DESCRIPTION,
BRAKE/PARK........................8J-16
BRAKE INDICATOR - DIAGNOSIS AND
TESTING...........................8J-16
BRAKE INDICATOR - OPERATION,
BRAKE/PARK........................8J-16
BRAKE LAMP SWITCH - DESCRIPTION....8L-4
BRAKE LAMP SWITCH - DIAGNOSIS
AND TESTING........................8L-5
BRAKE LAMP SWITCH - INSTALLATION....8L-5
BRAKE LAMP SWITCH - OPERATION......8L-4
BRAKE LAMP SWITCH - REMOVAL.......8L-5
BRAKE ROTOR - DIAGNOSIS AND
TESTING, DISC.......................5-20
BRAKE SHOES - 2500/3500 -
INSTALLATION, REAR DRUM IN HAT
PARK...............................5-42
BRAKE SHOES - 2500/3500 - REMOVAL,
REAR DRUM IN HAT PARK..............5-41
BRAKE SHOES-11 INCH - INSTALLATION,
REAR...............................5-27
BRAKE SHOES-11 INCH - REMOVAL,
REAR...............................5-25
BRAKE, SPECIFICATIONS - BASE..........5-2
BRAKE SYSTEM - DIAGNOSIS AND
TESTING, BASE........................5-5
BRAKE/PARK BRAKE INDICATOR -
DESCRIPTION
.......................8J-16
BRAKE/PARK BRAKE INDICATOR -
OPERATION
.........................8J-16
BRAKES - DESCRIPTION, 2500/3500
WITH REAR DISC
.....................5-35
BRAKES - INSPECTION, SERVICE
........30-17
BRAKES - INSTALLATION, REAR PARK
BRAKE CABLE - 2500/3500 WITH
REAR DISC
..........................5-38
BRAKES - INSTALLATION, REAR PARK
BRAKE CABLE 2500/3500 SERIES
WITH DRUM
.........................5-39
BRAKES - OPERATION, 2500/3500 WITH
REAR DISC
..........................5-36
BRAKES - REMOVAL, REAR PARK
BRAKE CABLE - 2500/3500 WITH
REAR DISC
..........................5-37
BRAKES - REMOVAL, REAR PARK
BRAKE CABLES 2500/3500 SERIES
WITH DRUM
.........................5-38
BRAKES, SPECIAL TOOLS - BASE
.........5-4
BREAKER - DESCRIPTION, CIRCUIT
....8W-97-4
BREAKER - DIAGNOSIS & TESTING,
CIRCUIT
.........................8W-97-4
BREAK-IN - STANDARD PROCEDURE,
A/C COMPRESSOR CLUTCH
............24-13BREATHER VAPOR CANISTER -
INSTALLATION, CRANKCASE............9-242
BREATHER VAPOR CANISTER -
REMOVAL, CRANKCASE...............9-241
BUCKLE - INSTALLATION, FRONT SEAT
BELT ..............................8O-20
BUCKLE - INSTALLATION, REAR SEAT
BELT ..............................8O-27
BUCKLE - REMOVAL, FRONT SEAT BELT . . 8O-20
BUCKLE - REMOVAL, REAR SEAT BELT . . . 8O-27
BUILT-IN INDICATOR TEST - STANDARD
PROCEDURE........................8F-11
BUMPER - DESCRIPTION, JOUNCE....2-28,2-9
BUMPER - INSTALLATION, FRONT........13-4
BUMPER - INSTALLATION, REAR.........13-5
BUMPER - INSTALLATION, SLAM........23-66
BUMPER - OPERATION, JOUNCE......2-28,2-9
BUMPER - REMOVAL, FRONT............13-3
BUMPER - REMOVAL, REAR.............13-5
BUMPER - REMOVAL, SLAM...........23-66
BUMPERS - DESCRIPTION..............13-1
BUMPER-SPORT - INSTALLATION,
FRONT..............................13-4
BUMPER-SPORT - REMOVAL, FRONT......13-4
BURNT FLUID - DIAGNOSIS AND
TESTING, CAUSES OF . . . 21-199,21-370,21-545,
21-715
BUS - DESCRIPTION, CCD DATA..........8E-6
BUS - DIAGNOSIS AND TESTING, CCD
D ATA................................8E-11
BUS - OPERATION, CCD DATA...........8E-7
BUSHING - INSTALLATION,
DISTRIBUTOR...............9-150,9-37,9-94
BUSHING - INSTALLATION, EXTENSION
HOUSING........21-198,21-369,21-544,21-714
BUSHING - REMOVAL, DISTRIBUTOR....9-150,
9-37,9-94
BUSHING - REMOVAL, EXTENSION
HOUSING........21-198,21-369,21-544,21-714
BUSHING AND SEAL - INSTALLATION,
EXTENSION HOUSING....21-850,21-885,21-921
BUSHING AND SEAL - REMOVAL,
EXTENSION HOUSING....21-850,21-885,21-921
BUSHINGS - INSTALLATION.............2-28
BUSHINGS - REMOVAL.................2-28
BYPASS HOSE WITH AIR CONDITIONING
- INSTALLATION, WATER PUMP..........7-77
BYPASS HOSE WITH AIR CONDITIONING
- REMOVAL, WATER PUMP..............7-74
BYPASS HOSE WITHOUT AIR
CONDITIONING - INSTALLATION,
WATER PUMP........................7-78
BYPASS HOSE WITHOUT AIR
CONDITIONING - REMOVAL, WATER
PUMP..............................7-77
CAB - INSTALLATION, CLUB/QUAD.......8O-20
CAB - INSTALLATION, STANDARD.......8O-19
CAB - REMOVAL, CLUB/QUAD..........8O-19
CAB - REMOVAL, STANDARD...........8O-18
CAB CHASSIS ADAPTER BRACKET -
INSTALLATION........................13-9
CAB CHASSIS ADAPTER BRACKET -
REMOVAL...........................13-9
CAB SIDE PANEL SPEAKER -
INSTALLATION, REAR.................8A-21
CAB SIDE PANEL SPEAKER - REMOVAL,
REAR..............................8A-20
CABLE - 2500/3500 WITH REAR DISC
BRAKES - INSTALLATION, REAR PARK
BRAKE..............................5-38
CABLE - 2500/3500 WITH REAR DISC
BRAKES - REMOVAL, REAR PARK
BRAKE..............................5-37
CABLE - ADJUSTMENTS,
TRANSMISSION THROTTLE VALVE.....21-254,
21-425,21-598,21-771
CABLE - DESCRIPTION.................8P-4
CABLE - DESCRIPTION, ANTENNA BODY . . . 8A-4
CABLE - DESCRIPTION, BATTERY........8F-19
CABLE - DESCRIPTION, SPARK PLUG.....8I-19
CABLE - DESCRIPTION, THROTTLE
VALVE
..........21-253,21-424,21-597,21-770
CABLE - INSTALLATION, CHECK
.........23-63
CABLE - INSTALLATION, FRONT
PARKING BRAKE
......................5-39
CABLE - INSTALLATION, INSTRUMENT
PANEL ANTENNA
.....................8A-10
CABLE - INSTALLATION, LATCH RELEASE
. 23-101
BR/BEINDEX 5
Description Group-Page Description Group-Page Description Group-Page

FAN - 3.9L/5.2L/5.9L/8.0L -
INSTALLATION, RADIATOR..............7-43
FAN - 3.9L/5.2L/5.9L/8.0L - REMOVAL,
RADIATOR...........................7-42
FAN - 5.9L DIESEL - CLEANING,
RADIATOR...........................7-44
FAN - 5.9L DIESEL - INSPECTION,
RADIATOR...........................7-44
FAN - 5.9L DIESEL - INSTALLATION,
RADIATOR...........................7-45
FAN - 5.9L DIESEL - REMOVAL,
RADIATOR...........................7-44
FAN DRIVE - DIAGNOSIS AND TESTING,
VISCOUS........................7-56,7-58
FAN DRIVE VISCOUS CLUTCH -
3.9L/5.2L/5.9L/8.0L - DESCRIPTION.......7-56
FAN DRIVE VISCOUS CLUTCH -
3.9L/5.2L/5.9L/8.0L - OPERATION.........7-56
FAN DRIVE VISCOUS CLUTCH - 5.9L
DIESEL - DESCRIPTION................7-57
FAN DRIVE VISCOUS CLUTCH - 5.9L
DIESEL - OPERATION..................7-57
FASCIA - ADJUSTMENT, FRONT..........13-2
FASCIA - INSTALLATION, FRONT.........13-2
FASCIA - INSTALLATION, FRONT LOWER . . . 13-3
FASCIA - REMOVAL, FRONT.............13-2
FASCIA - REMOVAL, FRONT LOWER......13-3
FASCIA-SPORT - INSTALLATION, FRONT . . . 13-3
FASCIA-SPORT - REMOVAL, FRONT.......13-3
FASTENER IDENTIFICATION -
DESCRIPTION......................Intro.-3
FASTENER USAGE - DESCRIPTION......Intro.-6
FASTENERS - DESCRIPTION, PUSH-IN.....23-1
FEATURES - DESCRIPTION,
PROGRAMMABLE ELECTRONIC.........30-20
FEATURES - OPERATION,
PROGRAMMABLE ELECTRONIC.........30-20
FENDER - INSTALLATION, LEFT FRONT . . . 23-93
FENDER - INSTALLATION, REAR.........23-95
FENDER - INSTALLATION, RIGHT FRONT . . 23-94
FENDER - REMOVAL, LEFT FRONT.......23-92
FENDER - REMOVAL, REAR............23-95
FENDER - REMOVAL, RIGHT FRONT......23-94
FILL - STANDARD PROCEDURE,
TRANSMISSION . . . 21-201,21-372,21-547,21-718
FILL DOOR - INSTALLATION, FUEL.......23-95
FILL DOOR - REMOVAL, FUEL..........23-95
FILLER CAP - DESCRIPTION, FUEL.......25-33
FILLER CAP - OPERATION, FUEL........25-33
FILLER CAP - REMOVAL/INSTALLATION,
FUEL..............................25-33
FILTER - DESCRIPTION, PCV...........25-35
FILTER - INSTALLATION, AIR PUMP......25-29
FILTER - INSTALLATION, INLET..........14-22
FILTER - INSTALLATION, OIL . 9-105,9-161,9-218,
9-296,9-48
FILTER - REMOVAL, AIR PUMP.........25-29
FILTER - REMOVAL, INLET.............14-22
FILTER - REMOVAL, OIL.....9-105,9-161,9-218,
9-296,9-48
FILTER - STANDARD PROCEDURES,
WATER DRAINING AT FUEL............14-56
FILTER / WATER SEPARATOR -
DESCRIPTION, FUEL..................14-59
FILTER / WATER SEPARATOR -
INSTALLATION, FUEL.................14-61
FILTER / WATER SEPARATOR -
OPERATION, FUEL....................14-59
FILTER / WATER SEPARATOR -
REMOVAL, FUEL.....................14-60
FILTER REPLACEMENT - STANDARD
PROCEDURE, FLUID.....21-201,21-372,21-547,
21-717
FILTER/PRESSURE REGULATOR -
DESCRIPTION, FUEL...................14-5
FILTER/PRESSURE REGULATOR -
INSTALLATION, FUEL..................14-6
FILTER/PRESSURE REGULATOR -
OPERATION, FUEL.....................14-5
FILTER/PRESSURE REGULATOR -
REMOVAL, FUEL
......................14-5
FINAL STEPS - NEW VEHICLE
PREPARATION FORM
.................30-22
FINISH - DESCRIPTION, BASE
COAT/CLEAR COAT
..................23-129
FINISH - INSPECTION, FIT
........30-10,30-12
FINISH - OPERATION, BASE COAT/CLEAR
COAT
.............................23-129FIRING ORDER, 3.9L V-6 ENGINE -
ENGINE..............................8I-2
FIRING ORDER, 5.2L/5.9L V-8 ENGINES -
ENGINE..............................8I-2
FIRING ORDER, DIESEL - FUEL
INJECTOR..........................14-58
FIT AND FINISH - INSPECTION.....30-10,30-12
FITTING - DESCRIPTION, QUICK
CONNECT...........................14-22
FITTING - STANDARD PROCEDURE,
CONNECTING ROD BEARING . . 9-144,9-202,9-88
FITTING - STANDARD PROCEDURE,
CRANKSHAFT MAIN BEARING......9-146,9-90
FITTING - STANDARD PROCEDURE,
MAIN BEARING..................9-203,9-33
FITTING - STANDARD PROCEDURE,
PISTON...............9-153,9-208,9-40,9-97
FITTING - STANDARD PROCEDURE,
PISTON RING...............9-154,9-41,9-98
FITTING, CONNECTING ROD BEARINGS -
STANDARD PROCEDURE-CONNECTING
ROD BEARING........................9-31
FITTING PISTON RINGS - STANDARD
PROCEDURE........................9-211
FITTING, PISTON RINGS - STANDARD
PROCEDURE-PISTON RING.............9-288
FITTINGS - STANDARD PROCEDURES,
QUICK-CONNECT.....................14-22
FIXED ORIFICE TUBE - DIAGNOSIS AND
TESTING...........................24-54
FLAG - INSTALLATION, SIDE VIEW
MIRROR...........................23-74
FLAG - REMOVAL, SIDE VIEW MIRROR . . . 23-74
FLARING - STANDARD PROCEDURE,
DOUBLE INVERTED.....................5-8
FLARING - STANDARD PROCEDURE, ISO....5-8
FLASHER - DESCRIPTION, COMBINATION . . 8L-7
FLASHER - INSTALLATION,
COMBINATION........................8L-8
FLASHER - OPERATION, COMBINATION....8L-7
FLASHER - REMOVAL, COMBINATION.....8L-8
FLOOR MATS - INSTALLATION, CARPETS . 23-123
FLOOR MATS - REMOVAL, CARPETS....23-123
FLOOR SHIFT BOOT - INSTALLATION,
4WD .............................23-122
FLOOR SHIFT BOOT - REMOVAL, 4WD . . . 23-122
FLOOR STOWAGE TRAY -
INSTALLATION, REAR................23-121
FLOOR STOWAGE TRAY - REMOVAL,
REAR.............................23-121
FLOW - 3.9L/5.2L/5.9L ENGINE -
DESCRIPTION, COOLING SYSTEM.........7-1
FLOW - 5.9L DIESEL - DESCRIPTION,
COOLING SYSTEM.....................7-1
FLOW - DIAGNOSIS AND TESTING,
RADIATOR COOLANT..........7-59,7-61,7-63
FLOW AND PRESSURE - DIAGNOSIS
AND TESTING, POWER STEERING........19-4
FLUID - DESCRIPTION, AUTOMATIC
TRANSMISSION.......................0-5
FLUID - DESCRIPTION, TRANSFER CASE....0-5
FLUID - DIAGNOSIS AND TESTING,
CAUSES OF BURNT.....21-199,21-370,21-545,
21-715
FLUID - OPERATION, AUTOMATIC
TRANSMISSION.......................0-5
FLUID AND FILTER REPLACEMENT -
STANDARD PROCEDURE . 21-201,21-372,21-547,
21-717
FLUID CAPACITIES, SPECIFICATIONS.......0-6
FLUID CONTAMINATION - DIAGNOSIS
AND TESTING....21-199,21-370,21-545,21-715
FLUID CONTAMINATION - DIAGNOSIS
AND TESTING, BRAKE..................5-14
FLUID DRAIN AND REFILL - STANDARD
PROCEDURE...........21-851,21-885,21-922
FLUID INDICATOR - DESCRIPTION,
WASHER
...........................8J-35
FLUID INDICATOR - DIAGNOSIS AND
TESTING, WASHER
...................8J-36
FLUID INDICATOR - OPERATION,
WASHER
...........................8J-35
FLUID LEAK - DIAGNOSIS AND TESTING,
CONVERTER HOUSING
. . . 21-148,21-319,21-491,
21-662
FLUID LEVEL - DIAGNOSIS AND
TESTING, EFFECTS OF INCORRECT
.....21-199,
21-370,21-545,21-715FLUID LEVEL - STANDARD PROCEDURE,
BRAKE..............................5-14
FLUID LEVEL CHECK - STANDARD
PROCEDURE.....21-199,21-370,21-545,21-715
FLUID LEVEL SWITCH - DESCRIPTION,
WASHER............................8R-7
FLUID LEVEL SWITCH - INSTALLATION,
WASHER............................8R-8
FLUID LEVEL SWITCH - OPERATION,
WASHER............................8R-7
FLUID LEVEL SWITCH - REMOVAL,
WASHER............................8R-8
FLUID LEVELS - INSPECTION............30-4
FLUID RESERVOIR - INSTALLATION.......5-15
FLUID RESERVOIR - REMOVAL..........5-15
FLUID, SPECIFICATIONS - BRAKE.........5-15
FLUID TYPES - DESCRIPTION.............0-5
FLUSH MEASUREMENTS,
SPECIFICATIONS - BODY GAP..........23-56
FLUSHING - STANDARD PROCEDURE,
COOLING SYSTEM CLEANING/
REVERSE............................7-16
FLUSHING COOLER AND TUBES -
WITHOUT RADIATOR IN-TANK
TRANSMISSION OIL COOLER -
STANDARD PROCEDURE.......7-80,7-83,7-86
FLUSHING COOLERS AND TUBES - WITH
RADIATOR IN-TANK TRANSMISSION
OIL COOLER - STANDARD
PROCEDURE.................7-79,7-83,7-85
FLUSHING POWER STEERING SYSTEM -
STANDARD PROCEDURE...............19-32
FLYWHEEL - ASSEMBLY................6-17
FLYWHEEL - DESCRIPTION..............6-16
FLYWHEEL - DIAGNOSIS AND TESTING....6-17
FLYWHEEL - DISASSEMBLY.............6-17
FLYWHEEL - OPERATION...............6-16
FOG LAMP - DIAGNOSIS AND TESTING....8L-9
FOG LAMP - INSTALLATION............8L-11
FOG LAMP - REMOVAL................8L-11
FOG LAMP UNIT - ADJUSTMENTS.......8L-12
FOG LAMP UNIT - INSTALLATION........8L-12
FOG LAMP UNIT - REMOVAL...........8L-11
FORE/AFT - ADJUSTMENT, FRONT DOOR . . 23-68
FORM, FINAL STEPS - NEW VEHICLE
PREPARATION.......................30-22
FORM-IN-PLACE GASKETS & SEALERS -
STANDARD PROCEDURE.....9-11,9-125,9-180,
9-237,9-68
FOUR-WHEEL DRIVE INDICATOR -
DIAGNOSIS AND TESTING..............8J-29
FRAME - DESCRIPTION.................13-6
FRAME - FRAME SERVICE..............13-6
FRAME - INSTALLATION, GRILLE........23-92
FRAME - REMOVAL, GRILLE............23-91
FRAME DIMENSION, SPECIFICATIONS.....13-7
FRAME SERVICE, FRAME...............13-6
FRONT - 2WD - DESCRIPTION.........2-7,2-8
FRONT - 4WD - DESCRIPTION...........2-14
FRONT - DESCRIPTION, CRANKSHAFT
OIL SEAL...................9-147,9-34,9-91
FRONT - INSTALLATION............5-14,5-27
FRONT - INSTALLATION...............22-12
FRONT - INSTALLATION, 1500/2500.......5-22
FRONT - INSTALLATION, 3500...........5-22
FRONT - INSTALLATION, CRANKSHAFT
OIL SEAL..............9-148,9-277,9-34,9-91
FRONT - INSTALLATION, PROPELLER
SHAFT...............................3-8
FRONT - OPERATION, CRANKSHAFT OIL
SEAL......................9-147,9-34,9-91
FRONT - REMOVAL................5-10,5-24
FRONT - REMOVAL, 1500/2500..........5-21
FRONT - REMOVAL, 3500...............5-22
FRONT - REMOVAL, CRANKSHAFT OIL
SEAL.................9-147,9-276,9-34,9-91
FRONT - REMOVAL, PROPELLER SHAFT....3-8
FRONT AIR DAM - INSTALLATION........13-2
FRONT AIR DAM - REMOVAL............13-1
FRONT AXLE - 216FBI - ADJUSTMENTS....3-17
FRONT AXLE - 216FBI - DESCRIPTION.....3-12
FRONT AXLE - 216FBI - INSTALLATION....3-17
FRONT AXLE - 216FBI - OPERATION......3-12
FRONT AXLE - 216FBI - REMOVAL
........3-16
FRONT AXLE - 248FBI - ADJUSTMENTS
....3-50
FRONT AXLE - 248FBI - DESCRIPTION
.....3-45
FRONT AXLE - 248FBI - INSTALLATION
....3-50
FRONT AXLE - 248FBI - OPERATION
......3-45
14 INDEXBR/BE
Description Group-Page Description Group-Page Description Group-Page

MANIFOLD - INSTALLATION, INTAKE.....9-111,
9-166,9-223,9-302,9-53
MANIFOLD - OPERATION, EXHAUST.....9-112,
9-168,9-224,9-55
MANIFOLD - OPERATION, FUEL DRAIN . . . 14-86
MANIFOLD - OPERATION, INTAKE . . 9-109,9-165,
9-52
MANIFOLD - REMOVAL, EXHAUST . . 9-112,9-168,
9-225,9-303,9-55
MANIFOLD - REMOVAL, FUEL DRAIN.....14-86
MANIFOLD - REMOVAL, INTAKE . . . 9-110,9-166,
9-222,9-301,9-53
MANIFOLD LEAKAGE - DIAGNOSIS AND
TESTING, INTAKE......9-110,9-165,9-222,9-53
MANUAL BLEEDING - STANDARD
PROCEDURE..........................5-7
MANUAL, NV3500....................21-41
MANUAL, NV4500....................21-83
MANUAL TRANSMISSION - DIAGNOSIS
AND TESTING..............21-3,21-46,21-93
MANUAL TRANSMISSION -
INSTALLATION, SHIFT BOOT...........23-122
MANUAL TRANSMISSION - REMOVAL,
SHIFT BOOT........................23-122
MANUAL TRANSMISSION, SPECIAL
TOOLS - NV5600....................21-127
MAP SENSOR - INSTALLATION.........14-104
MARKER LAMP - INSTALLATION........8L-23
MARKER LAMP - REMOVAL............8L-22
MASTER CYLINDER - DESCRIPTION......5-29
MASTER CYLINDER - INSTALLATION.......5-30
MASTER CYLINDER - OPERATION........5-29
MASTER CYLINDER - REMOVAL..........5-30
MASTER CYLINDER BLEEDING -
STANDARD PROCEDURE................5-30
MASTER CYLINDER/POWER BOOSTER -
DIAGNOSIS AND TESTING..............5-29
MATCH MOUNTING - STANDARD
PROCEDURES........................22-2
MATS - INSTALLATION, CARPETS AND
FLOOR............................23-123
MATS - REMOVAL, CARPETS AND
FLOOR............................23-123
MEASUREMENT - STANDARD
PROCEDURES, CASTER CORRECTION......2-3
MEASUREMENTS, SPECIFICATIONS -
BODY GAP AND FLUSH................23-56
MEASURING TIMING CHAIN STRETCH -
INSPECTION..........9-114,9-170,9-227,9-58
MECHANICAL - DIAGNOSIS AND
TESTING...............9-120,9-175,9-6,9-63
MECHANICAL - DIAGNOSIS AND
TESTING, ENGINE DIAGNOSIS..........9-232
MECHANISM - ADJUSTMENT, SHIFT....21-252,
21-423,21-596,21-769
MECHANISM - DESCRIPTION, SHIFT....21-251,
21-422,21-595,21-768
MECHANISM - INSTALLATION, SHIFT.....21-89
MECHANISM - OPERATION, SHIFT......21-251,
21-422,21-595,21-768
MECHANISM - REMOVAL, SHIFT........21-88
MEDIUM DUTY TRUCK MAINTENANCE
SCHEDULE (8.0L 2500 & 3500
MODELS - CALIFORNIA ONLY) -
DESCRIPTION........................0-13
METRIC SYSTEM - DESCRIPTION......Intro.-6
MILE, SPECIFICATIONS - TIRE
REVOLUTIONS PER....................22-9
MINI-TRIP COMPUTER - DIAGNOSIS &
TESTING, COMPASS..................8M-10
MIRROR - DESCRIPTION, AUTOMATIC
DAY / NIGHT........................8N-10
MIRROR - DESCRIPTION, SIDEVIEW.....8N-13
MIRROR - DIAGNOSIS AND TESTING,
AUTOMATIC DAY/NIGHT...............8N-11
MIRROR - DIAGNOSIS AND TESTING,
SIDEVIEW..........................8N-13
MIRROR - INSPECTION................30-19
MIRROR - INSTALLATION, AUTOMATIC
DAY / NIGHT........................8N-12
MIRROR - INSTALLATION, REAR VIEW
. . 23-126
MIRROR - INSTALLATION, SIDE VIEW
....23-97
MIRROR - LOW MOUNTED -
INSTALLATION, SIDE VIEW
.............23-98
MIRROR - LOW MOUNTED - REMOVAL,
SIDE VIEW
..........................23-98
MIRROR - OPERATION, AUTOMATIC DAY
/ NIGHT
............................8N-11MIRROR - OPERATION, SIDEVIEW.......8N-13
MIRROR - REMOVAL, AUTOMATIC DAY /
NIGHT.............................8N-12
MIRROR - REMOVAL, REAR VIEW......23-126
MIRROR - REMOVAL, SIDE VIEW........23-97
MIRROR - REMOVAL, SIDEVIEW........8N-14
MIRROR FLAG - INSTALLATION, SIDE
VIEW..............................23-74
MIRROR FLAG - REMOVAL, SIDE VIEW . . . 23-74
MIRROR GLASS - INSTALLATION, SIDE
VIEW..............................23-98
MIRROR GLASS - REMOVAL, SIDE VIEW . . 23-98
MIRROR GRID - DESCRIPTION, HEATED . . . 8G-4
MIRROR GRID - DIAGNOSIS AND
TESTING, HEATED.....................8G-4
MIRROR GRID - OPERATION, HEATED.....8G-4
MIRROR SUPPORT BRACKET -
INSTALLATION, REARVIEW............23-126
MIRROR SWITCH - DESCRIPTION........8G-3
MIRROR SWITCH - DESCRIPTION,
POWER............................8N-12
MIRROR SWITCH - DIAGNOSIS AND
TESTING, HEATED.....................8G-3
MIRROR SWITCH - INSTALLATION,
POWER............................8N-13
MIRROR SWITCH - OPERATION..........8G-3
MIRROR SWITCH - OPERATION, POWER . . 8N-12
MIRROR SWITCH - REMOVAL, POWER . . . 8N-12
MIRROR SYSTEM - DESCRIPTION,
HEATED..............................8G-1
MIRROR SYSTEM - DIAGNOSIS AND
TESTING, HEATED.....................8G-2
MIRROR SYSTEM - OPERATION, HEATED . . 8G-2
MIRRORS - DESCRIPTION, POWER......8N-10
MIRRORS - OPERATION, POWER........8N-10
MODE - DESCRIPTION, CIRCUIT
ACTUATION TEST.....................25-1
MODE - DESCRIPTION, STATE DISPLAY
TEST...............................25-1
MODES OF OPERATION - DESCRIPTION . . . 8E-14
MODULE - DESCRIPTION, AIRBAG
CONTROL...........................8O-6
MODULE - DESCRIPTION, BODY
CONTROL/CENTRAL TIMER..............8E-1
MODULE - DESCRIPTION, DAYTIME
RUNNING LAMP......................8L-9
MODULE - DESCRIPTION, FUEL PUMP....14-12
MODULE - DESCRIPTION, FUEL TANK....14-78
MODULE - DESCRIPTION, WIPER.......8R-14
MODULE - DIAGNOSIS AND TESTING,
CENTRAL TIMER......................8E-4
MODULE - INSTALLATION, AIRBAG
CONTROL...........................8O-8
MODULE - INSTALLATION, BODY
CONTROL/CENTRAL TIMER..............8E-6
MODULE - INSTALLATION, DAYTIME
RUNNING LAMP......................8L-9
MODULE - INSTALLATION, ENGINE
CONTROL..........................8E-14
MODULE - INSTALLATION, FUEL PUMP . . . 14-13
MODULE - INSTALLATION, FUEL TANK....14-79
MODULE - INSTALLATION, POWERTRAIN
CONTROL..........................8E-20
MODULE - INSTALLATION, WIPER.......8R-15
MODULE - OPERATION, AIRBAG
CONTROL...........................8O-6
MODULE - OPERATION, BODY
CONTROL/CENTRAL TIMER..............8E-3
MODULE - OPERATION, DAYTIME
RUNNING LAMP......................8L-9
MODULE - OPERATION, FUEL PUMP.....14-13
MODULE - OPERATION, FUEL TANK......14-78
MODULE - OPERATION, WIPER.........8R-14
MODULE - REMOVAL, AIRBAG CONTROL . . 8O-7
MODULE - REMOVAL, BODY CONTROL/
CENTRAL TIMER......................8E-5
MODULE - REMOVAL, DAYTIME
RUNNING LAMP......................8L-9
MODULE - REMOVAL, ENGINE CONTROL . . 8E-14
MODULE - REMOVAL, FUEL PUMP.......14-13
MODULE - REMOVAL, FUEL TANK.......14-78
MODULE - REMOVAL, POWERTRAIN
CONTROL..........................8E-19
MODULE - REMOVAL, WIPER
...........8R-14
MOLDING - INSTALLATION, ROOF JOINT
. . 23-91
MOLDING - REMOVAL, ROOF JOINT
......23-91
MOLDINGS - INSTALLATION, BODY SIDE
. . 23-87
MOLDINGS - REMOVAL, BODY SIDE
.....23-87MOLEX - INSTALLATION, CONNECTOR . 8W-01-9
MOLEX - REMOVAL, CONNECTOR.....8W-01-9
MONITORED SYSTEMS - DESCRIPTION . . . 25-15
MONITORS - DIESEL ENGINES -
DESCRIPTION, COMPONENT............25-18
MONITORS - GAS ENGINES -
DESCRIPTION, COMPONENT............25-18
MOTOR - ASSEMBLY, AXLE VACUUM . . 3-33,3-65
MOTOR - DESCRIPTION, AXLE VACUUM . . . 3-29,
3-62
MOTOR - DESCRIPTION, BLOWER.......24-32
MOTOR - DESCRIPTION, ENGINE
STARTER ...........................8F-39
MOTOR - DESCRIPTION, IDLE AIR
CONTROL..........................14-41
MOTOR - DESCRIPTION, LUMBAR.......8N-18
MOTOR - DESCRIPTION, POWER LOCK....8N-6
MOTOR - DESCRIPTION, RECLINER......8N-20
MOTOR - DESCRIPTION, WINDOW......8N-26
MOTOR - DIAGNOSIS AND TESTING,
BLOWER...........................24-33
MOTOR - DIAGNOSIS AND TESTING,
POWER LOCK........................8N-7
MOTOR - DIAGNOSIS AND TESTING,
STARTER ...........................8F-39
MOTOR - DIAGNOSIS AND TESTING,
VACUUM........................3-31,3-63
MOTOR - DIAGNOSIS AND TESTING,
WINDOW...........................8N-26
MOTOR - DISASSEMBLY, AXLE VACUUM . . 3-33,
3-65
MOTOR - INSTALLATION, AXLE VACUUM . . 3-33,
3-65
MOTOR - INSTALLATION, BLOWER......24-33
MOTOR - INSTALLATION, ENGINE
STARTER ...........................8F-41
MOTOR - OPERATION, AXLE VACUUM . 3-30,3-62
MOTOR - OPERATION, BLOWER.........24-32
MOTOR - OPERATION, ENGINE STARTER . . 8F-39
MOTOR - OPERATION, IDLE AIR
CONTROL..........................14-41
MOTOR - OPERATION, LUMBAR........8N-18
MOTOR - OPERATION, POWER LOCK.....8N-6
MOTOR - OPERATION, RECLINER.......8N-21
MOTOR - REMOVAL, AXLE VACUUM . . 3-33,3-65
MOTOR - REMOVAL, BLOWER..........24-33
MOTOR - REMOVAL, ENGINE STARTER . . . 8F-40
MOTOR - REMOVAL, WINDOW..........8N-26
MOTOR RELAY - DESCRIPTION,
BLOWER...........................24-22
MOTOR RELAY - DESCRIPTION, ENGINE
STARTER ...........................8F-42
MOTOR RELAY - DIAGNOSIS AND
TESTING, BLOWER...................24-22
MOTOR RELAY - INSTALLATION,
BLOWER...........................24-23
MOTOR RELAY - INSTALLATION, ENGINE
STARTER ...........................8F-43
MOTOR RELAY - OPERATION, BLOWER . . . 24-22
MOTOR RELAY - OPERATION, ENGINE
STARTER ...........................8F-42
MOTOR RELAY - REMOVAL, BLOWER....24-23
MOTOR RELAY - REMOVAL, ENGINE
STARTER ...........................8F-43
MOTOR RESISTOR BLOCK -
DESCRIPTION, BLOWER...............24-23
MOTOR RESISTOR BLOCK - DIAGNOSIS
AND TESTING, BLOWER...............24-24
MOTOR RESISTOR BLOCK -
INSTALLATION, BLOWER..............24-24
MOTOR RESISTOR BLOCK - OPERATION,
BLOWER...........................24-23
MOTOR RESISTOR BLOCK - REMOVAL,
BLOWER...........................24-24
MOTOR SWITCH - DESCRIPTION,
BLOWER...........................24-24
MOTOR SWITCH - DIAGNOSIS AND
TESTING, BLOWER...................24-25
MOTOR SWITCH - OPERATION, BLOWER . . 24-25
MOTOR SWITCH - REMOVAL, BLOWER
. . . 24-25
MOUNT - INSTALLATION, FRONT
. . . 9-100,9-156,
9-213,9-290,9-43
MOUNT - INSTALLATION, REAR
....9-101,9-158,
9-213,9-291,9-44
MOUNT - REMOVAL, FRONT
. 9-100,9-156,9-213,
9-290,9-43
MOUNT - REMOVAL, REAR
. . 9-101,9-157,9-213,
9-291,9-44
22 INDEXBR/BE
Description Group-Page Description Group-Page Description Group-Page

SEAT TRACK ADJUSTER - REMOVAL....23-143
SEATBELT INDICATOR - DESCRIPTION....8J-27
SEATBELT INDICATOR - OPERATION......8J-27
SEATS - CLEANING, INTAKE/EXHAUST
VALVES ...............9-140,9-198,9-27,9-84
SEATS - DESCRIPTION...............23-131
SEATS - DESCRIPTION, INTAKE/
EXHAUST VALVES . . 9-138,9-195,9-25,9-253,9-81
SEATS - INSPECTION.................30-13
SEATS - INSPECTION, INTAKE/EXHAUST
VALVES ...............9-141,9-198,9-27,9-84
SEATS - INSTALLATION, INTAKE/
EXHAUST VALVES.......9-141,9-260,9-28,9-85
SEATS - OPERATION.................23-131
SEATS - REMOVAL, INTAKE/EXHAUST
VALVES ...............9-140,9-258,9-27,9-84
SEATS - STANDARD PROCEDURE-
VALVES,GUIDES AND SPRINGS,
INTAKE/EXHAUST VALVES..............9-253
SEATS - VALVE SERVICE, INTAKE/
EXHAUST VALVES....................9-195
SECOND WEATHERSTRIP -
INSTALLATION, FRONT DOOR..........23-155
SECOND WEATHERSTRIP - REMOVAL,
FRONT DOOR......................23-154
SECURITY - DESCRIPTION, VEHICLE
THEFT..............................8Q-1
SECURITY - OPERATION, VEHICLE THEFT . . 8Q-2
SECURITY SYSTEM - DIAGNOSIS AND
TESTING, VEHICLE THEFT..............8Q-3
SELECTION-ADDITIVES - STANDARD
PROCEDURE, COOLANT..................7-17
SELECTOR INDICATOR - DESCRIPTION,
GEAR..............................8J-21
SELECTOR INDICATOR - OPERATION,
GEAR..............................8J-21
SENDING UNIT - DIAGNOSIS AND
TESTING, FUEL GAUGE.................14-8
SENDING UNIT / SENSOR -
DESCRIPTION, FUEL LEVEL........14-7,14-73
SENDING UNIT / SENSOR -
INSTALLATION, FUEL LEVEL.............14-9
SENDING UNIT / SENSOR - OPERATION,
FUEL LEVEL.....................14-7,14-73
SENDING UNIT / SENSOR - REMOVAL,
FUEL LEVEL..........................14-8
SENSE - DESCRIPTION, IGNITION
CIRCUIT............................8E-17
SENSE - OPERATION, IGNITION CIRCUIT . . 8E-19
SENSE - PCM INPUT - OPERATION, ASD . . . 8I-3
SENSOR - 3.9L/5.2L/5.9L -
DESCRIPTION, ENGINE COOLANT
TEMP...............................7-48
SENSOR - 3.9L/5.2L/5.9L -
INSTALLATION, ENGINE COOLANT
TEMP...............................7-48
SENSOR - 3.9L/5.2L/5.9L - OPERATION,
ENGINE COOLANT TEMP................7-48
SENSOR - 3.9L/5.2L/5.9L - REMOVAL,
ENGINE COOLANT TEMP................7-48
SENSOR - DESCRIPTION, ACCELERATOR
PEDAL POSITION....................14-91
SENSOR - DESCRIPTION, AMBIENT
TEMP.............................8M-11
SENSOR - DESCRIPTION, BATTERY
TEMPERATURE......................8F-29
SENSOR - DESCRIPTION, FUEL LEVEL
SENDING UNIT..................14-7,14-73
SENSOR - DESCRIPTION, FUEL
TEMPERATURE......................14-99
SENSOR - DESCRIPTION, O2...........14-46
SENSOR - DESCRIPTION, SPEED . 21-253,21-424,
21-597,21-770
SENSOR - DESCRIPTION, THROTTLE
POSITION..........................14-51
SENSOR - DESCRIPTION,
TRANSMISSION TEMPERATURE . 21-262,21-433,
21-606,21-779
SENSOR - DESCRIPTION, WATER IN
FUEL
..............................14-85
SENSOR - DIAGNOSIS & TESTING,
AMBIENT TEMPERATURE
..............8M-12
SENSOR - DIAGNOSIS & TESTING,
HEATED SEAT ELEMENT
...............8G-11
SENSOR - INSTALLATION,
ACCELERATOR PEDAL POSITION
........14-93
SENSOR - INSTALLATION, AMBIENT
TEMP
.............................8M-13SENSOR - INSTALLATION, BATTERY
TEMPERATURE......................8F-29
SENSOR - INSTALLATION, FUEL LEVEL
SENDING UNIT.......................14-9
SENSOR - INSTALLATION, MAP........14-104
SENSOR - INSTALLATION, O2...........14-48
SENSOR - OPERATION, ACCELERATOR
PEDAL POSITION....................14-91
SENSOR - OPERATION, AMBIENT TEMP . . 8M-11
SENSOR - OPERATION, BATTERY
TEMPERATURE......................8F-29
SENSOR - OPERATION, FUEL LEVEL
SENDING UNIT..................14-7,14-73
SENSOR - OPERATION, FUEL
TEMPERATURE.....................14-100
SENSOR - OPERATION, O2.............14-46
SENSOR - OPERATION, SPEED . . 21-253,21-424,
21-597,21-770
SENSOR - OPERATION, THROTTLE
POSITION..........................14-51
SENSOR - OPERATION, TRANSMISSION
TEMPERATURE . . . 21-262,21-433,21-606,21-779
SENSOR - OPERATION, WATER IN FUEL . . 14-85
SENSOR - REMOVAL, ACCELERATOR
PEDAL POSITION....................14-91
SENSOR - REMOVAL, AMBIENT TEMP . . . 8M-12
SENSOR - REMOVAL, BATTERY
TEMPERATURE......................8F-29
SENSOR - REMOVAL, FUEL LEVEL
SENDING UNIT.......................14-8
SENSOR - REMOVAL, O2..............14-47
SENSOR - REMOVAL, WATER IN FUEL....14-85
SENSOR RETURN - DESCRIPTION.......8E-17
SENSOR/SWITCH - DESCRIPTION, OIL
PRESSURE.....................9-298,9-49
SENSOR/SWITCH - INSTALLATION, OIL
PRESSURE.........................9-299
SENSOR/SWITCH - OPERATION, OIL
PRESSURE.....................9-298,9-49
SENSOR/SWITCH - REMOVAL, OIL
PRESSURE.........................9-298
SEPARATOR - DESCRIPTION, FUEL
FILTER / WATER .....................14-59
SEPARATOR - INSTALLATION, FUEL
FILTER / WATER .....................14-61
SEPARATOR - OPERATION, FUEL FILTER
/ WATER ...........................14-59
SEPARATOR - REMOVAL, FUEL FILTER /
WATER.............................14-60
SERIES - INSTALLATION, REAR PARK
BRAKE CABLES - 1500.................5-39
SERIES - REMOVAL, REAR PARK BRAKE
CABLES - 1500.......................5-37
SERIES WITH DRUM BRAKES -
INSTALLATION, REAR PARK BRAKE
CABLE 2500/3500.....................5-39
SERIES WITH DRUM BRAKES -
REMOVAL, REAR PARK BRAKE
CABLES 2500/3500....................5-38
SERVO - ASSEMBLY, FRONT....21-208,21-379,
21-553,21-723
SERVO - ASSEMBLY, REAR.....21-251,21-422,
21-595,21-768
SERVO - CLEANING, FRONT
....21-207,21-378,
21-552,21-723
SERVO - CLEANING, REAR
.....21-251,21-422,
21-594,21-768
SERVO - DESCRIPTION, FRONT
. . 21-206,21-377,
21-551,21-722
SERVO - DESCRIPTION, REAR
. . . 21-250,21-421,
21-594,21-767
SERVO - DESCRIPTION, SPEED
CONTROL
...........................8P-5
SERVO - DISASSEMBLY, FRONT
. 21-207,21-378,
21-552,21-723
SERVO - DISASSEMBLY, REAR
. . 21-251,21-421,
21-594,21-768
SERVO - INSPECTION, FRONT
. . . 21-207,21-378,
21-553,21-723
SERVO - INSTALLATION, SPEED
CONTROL
..........................8P-10
SERVO - OPERATION, FRONT
. . . 21-207,21-377,
21-552,21-723
SERVO - OPERATION, REAR
....21-250,21-421,
21-594,21-767
SERVO - OPERATION, SPEED CONTROL
. . . 8P-5
SERVO - REMOVAL, SPEED CONTROL
.....8P-6SEVERAL LOADS - STANDARD
PROCEDURE, TESTING FOR SHORT TO
GROUND ON FUSES POWERING......8W-01-7
SHAFT - ASSEMBLY, PLANETARY
GEARTRAIN/OUTPUT....21-241,21-412,21-588,
21-760
SHAFT - DESCRIPTION, PLANETARY
GEARTRAIN/OUTPUT....21-240,21-410,21-585,
21-757
SHAFT - DESCRIPTION, PROPELLER.......3-1
SHAFT - DIAGNOSIS AND TESTING,
PROPELLER...........................3-3
SHAFT - DISASSEMBLY, PLANETARY
GEARTRAIN/OUTPUT....21-240,21-411,21-586,
21-757
SHAFT - FRONT - INSTALLATION,
PROPELLER...........................3-8
SHAFT - FRONT - REMOVAL,
PROPELLER...........................3-8
SHAFT - INSPECTION, PLANETARY
GEARTRAIN/OUTPUT....21-241,21-411,21-587,
21-760
SHAFT - INSTALLATION, PITMAN........19-23
SHAFT - INSTALLATION, WORM.........19-29
SHAFT - OPERATION, PLANETARY
GEARTRAIN/OUTPUT....21-240,21-410,21-585,
21-757
SHAFT - OPERATION, PROPELLER.........3-1
SHAFT - REAR - INSTALLATION,
PROPELLER...........................3-9
SHAFT - REAR - REMOVAL, PROPELLER....3-9
SHAFT - REMOVAL, PITMAN............19-22
SHAFT - REMOVAL, WORM............19-27
SHAFT - STANDARD PROCEDURES,
PROPELLER...........................3-5
SHAFT FRONT BEARING -
INSTALLATION, OUTPUT . 21-213,21-384,21-560,
21-730
SHAFT FRONT BEARING - REMOVAL,
OUTPUT.........21-213,21-384,21-559,21-730
SHAFT REAR BEARING - INSTALLATION,
OUTPUT.........21-213,21-384,21-560,21-731
SHAFT REAR BEARING - REMOVAL,
OUTPUT.........21-213,21-384,21-560,21-731
SHAFT SEAL - INSTALLATION, FRONT
OUTPUT...............21-852,21-886,21-922
SHAFT SEAL - INSTALLATION, PITMAN . . . 19-24
SHAFT SEAL - REMOVAL, FRONT
OUTPUT...............21-851,21-886,21-922
SHAFT SEAL - REMOVAL, PITMAN.......19-23
SHAFT SEALS - INSTALLATION, AXLE . 3-29,3-61,
3-94
SHAFT SEALS - REMOVAL, AXLE . 3-29,3-61,3-94
SHAFT, SPECIAL TOOLS - PROPELLER......3-8
SHAFT, SPECIFICATIONS - PROPELLER.....3-8
SHAFTS - INSTALLATION, AXLE....3-125,3-156,
3-185,3-28,3-60,3-93
SHAFTS - INTERMEDIATE -
INSTALLATION, AXLE..................3-28
SHAFTS - INTERMEDIATE - REMOVAL,
AXLE...............................3-28
SHAFTS - REMOVAL, AXLE . . 3-125,3-156,3-185,
3-28,3-60,3-93
SHIELD - INSTALLATION, REAR SPLASH . . 23-96
SHIELD - REMOVAL, REAR SPLASH......23-96
SHIELDS - DESCRIPTION, HEAT.........11-10
SHIELDS - INSTALLATION, FRONT END
SPLASH
............................23-92
SHIELDS - INSTALLATION, HEAT
........11-10
SHIELDS - REMOVAL, FRONT END
SPLASH
............................23-92
SHIELDS - REMOVAL, HEAT
............11-10
SHIFT BOOT - INSTALLATION, 4WD
FLOOR
............................23-122
SHIFT BOOT - MANUAL TRANSMISSION
- INSTALLATION
....................23-122
SHIFT BOOT - MANUAL TRANSMISSION
- REMOVAL
........................23-122
SHIFT BOOT - REMOVAL, 4WD FLOOR
. . . 23-122
SHIFT COVER - INSTALLATION
....21-133,21-90
SHIFT COVER - REMOVAL
.......21-132,21-90
SHIFT INDICATOR (TRANSFER CASE) -
DESCRIPTION
.......................8J-29
SHIFT INDICATOR (TRANSFER CASE) -
OPERATION
.........................8J-29
SHIFT LEVER - ADJUSTMENT
. . . 21-853,21-888,
21-925
BR/BEINDEX 31
Description Group-Page Description Group-Page Description Group-Page

TOP COVER - INSTALLATION,
INSTRUMENT PANEL.................23-115
TOP COVER - REMOVAL, INSTRUMENT
PANEL............................23-114
TORQUE - FUEL DELIVERY -
SPECIFICATIONS......................14-4
TORQUE - GAS FUEL INJECTION -
SPECIFICATIONS.....................14-35
TORQUE - GENERATOR/CHARGING
SYSTEM - SPECIFICATIONS............8F-28
TORQUE - IGNITION - SPECIFICATIONS....8I-2
TORQUE - STARTING SYSTEM -
SPECIFICATIONS.....................8F-38
TORQUE, AIR INJECTION SYSTEM.......25-28
TORQUE CHART, SPECIFICATIONS.........5-3
TORQUE CHART, SPECIFICATIONS . . 19-19,19-39,
19-41,19-9
TORQUE CHART, SPECIFICATIONS . 2-15,2-27,2-8
TORQUE CHART, SPECIFICATIONS.......22-11
TORQUE CONVERTER - DESCRIPTION . . . 21-256,
21-427,21-600,21-773
TORQUE CONVERTER - INSTALLATION . . 21-261,
21-432,21-605,21-778
TORQUE CONVERTER - OPERATION....21-260,
21-430,21-604,21-777
TORQUE CONVERTER - REMOVAL......21-261,
21-432,21-605,21-778
TORQUE CONVERTER DRAINBACK
VALVE - DESCRIPTION . . . 21-262,21-432,21-605,
21-778
TORQUE CONVERTER DRAINBACK
VALVE - OPERATION....21-262,21-432,21-605,
21-778
TORQUE CONVERTER DRAINBACK
VALVE - STANDARD PROCEDURE......21-262,
21-432,21-606,21-778
TORQUE, DIESEL ENGINE..............14-90
TORQUE, EVAP SYSTEM...............25-31
TORQUE REFERENCES - DESCRIPTION . . Intro.-9
TORQUE, SPECIFICATIONS..............7-17
TORQUE, SPECIFICATIONS....9-133,9-18,9-187,
9-243,9-76
TORQUE, SPECIFICATIONS..............11-5
TORQUE SPECIFICATIONS,
SPECIFICATIONS.....................23-61
TORQUE SPECIFICATIONS,
SPECIFICATIONS......................13-9
TORQUE SPECIFICATIONS,
SPECIFICATIONS......................24-8
TORQUE, SPEED CONTROL SYSTEM......8P-4
TOUCH-UP - DESCRIPTION, PAINT......23-129
TOW HOOK - INSTALLATION, FRONT.....13-10
TOW HOOK - REMOVAL, FRONT..........13-9
TOWING - STANDARD PROCEDURE.......0-29
TRACK - DESCRIPTION, POWER SEAT....8N-21
TRACK - DIAGNOSIS & TESTING,
POWER SEAT.......................8N-21
TRACK - INSTALLATION, EASY ENTRY
SEAT .............................23-142
TRACK - INSTALLATION, POWER SEAT . . . 8N-22
TRACK - INSTALLATION, SEAT.........23-141
TRACK - OPERATION, POWER SEAT.....8N-21
TRACK - REMOVAL, EASY ENTRY SEAT . . 23-142
TRACK - REMOVAL, POWER SEAT.......8N-22
TRACK - REMOVAL, SEAT.............23-141
TRACK - SPLIT BENCH - INSTALLATION,
SEAT .............................23-142
TRACK - SPLIT BENCH - REMOVAL,
SEAT .............................23-142
TRACK ADJUSTER - INSTALLATION,
SEAT
.............................23-143
TRACK ADJUSTER - REMOVAL, SEAT
....23-143
TRACK BAR - DESCRIPTION
.............2-23
TRACK BAR - DIAGNOSIS AND TESTING
. . . 2-23
TRACK BAR - INSTALLATION
............2-23
TRACK BAR - OPERATION
...............2-23
TRACK BAR - REMOVAL
................2-23
TRAC-LOK - ASSEMBLY, DIFFERENTIAL
. . . 3-101,
3-132,3-190
TRAC-LOK - DISASSEMBLY,
DIFFERENTIAL
..............3-130,3-190,3-99
TRAC-LOKY- DIAGNOSIS AND TESTING
. 3-130,
3-190,3-98
TRAILER HITCH - INSTALLATION
........13-10
TRAILER HITCH - REMOVAL
............13-10
TRANS. - INSTALLATION, DIESEL WITH
AUTO
..........................8P-11,8P-4TRANS. - REMOVAL, DIESEL WITH AUTO . . 8P-4,
8P-8
TRANS COOLER - 3.9L/5.2L/5.9L -
ASSEMBLY..........................7-82
TRANS COOLER - 3.9L/5.2L/5.9L -
DESCRIPTION........................7-79
TRANS COOLER - 3.9L/5.2L/5.9L -
DISASSEMBLY........................7-81
TRANS COOLER - 3.9L/5.2L/5.9L -
INSTALLATION........................7-82
TRANS COOLER - 3.9L/5.2L/5.9L -
OPERATION..........................7-79
TRANS COOLER - 3.9L/5.2L/5.9L -
REMOVAL...........................7-81
TRANS COOLER - 5.9L DIESEL -
DESCRIPTION........................7-85
TRANS COOLER - 5.9L DIESEL -
INSTALLATION........................7-88
TRANS COOLER - 5.9L DIESEL -
OPERATION..........................7-85
TRANS COOLER - 8.0L - DESCRIPTION....7-82
TRANS COOLER - 8.0L - INSTALLATION....7-85
TRANS COOLER - 8.0L - OPERATION......7-82
TRANS COOLER - 8.0L - REMOVAL.......7-84
TRANSFER CASE - DIAGNOSIS AND
TESTING..............21-821,21-856,21-892
TRANSFER CASE - NV231HD -
ASSEMBLY.........................21-834
TRANSFER CASE - NV231HD -
CLEANING.........................21-831
TRANSFER CASE - NV231HD -
DESCRIPTION......................21-820
TRANSFER CASE - NV231HD -
DISASSEMBLY......................21-822
TRANSFER CASE - NV231HD -
INSPECTION.......................21-832
TRANSFER CASE - NV231HD -
INSTALLATION......................21-847
TRANSFER CASE - NV231HD -
OPERATION........................21-820
TRANSFER CASE - NV231HD - REMOVAL . 21-822
TRANSFER CASE - NV241HD -
ASSEMBLY.........................21-904
TRANSFER CASE - NV241HD -
CLEANING.........................21-902
TRANSFER CASE - NV241HD -
DESCRIPTION......................21-890
TRANSFER CASE - NV241HD -
DISASSEMBLY......................21-894
TRANSFER CASE - NV241HD -
INSPECTION.......................21-902
TRANSFER CASE - NV241HD -
INSTALLATION......................21-919
TRANSFER CASE - NV241HD -
OPERATION........................21-892
TRANSFER CASE - NV241HD - REMOVAL . 21-894
TRANSFER CASE - NV241LD -
ASSEMBLY.........................21-869
TRANSFER CASE - NV241LD - CLEANING . 21-866
TRANSFER CASE - NV241LD -
DESCRIPTION......................21-855
TRANSFER CASE - NV241LD -
DISASSEMBLY......................21-858
TRANSFER CASE - NV241LD -
INSPECTION.......................21-867
TRANSFER CASE - NV241LD -
INSTALLATION......................21-882
TRANSFER CASE - NV241LD -
OPERATION........................21-855
TRANSFER CASE - NV241LD - REMOVAL . 21-858
TRANSFER CASE FLUID - DESCRIPTION....0-5
TRANSFER CASE, NV231HD...........21-849
TRANSFER CASE, NV241HD...........21-920
TRANSFER CASE, NV241LD...........21-884
TRANSFER CASE SKID PLATE -
INSTALLATION.......................13-11
TRANSFER CASE SKID PLATE -
REMOVAL..........................13-11
TRANSFER CASE, SPECIFICATIONS.....21-848,
21-883,21-919
TRANSFER PUMP - DESCRIPTION, FUEL . . 14-79
TRANSFER PUMP - INSTALLATION, FUEL
. 14-83
TRANSFER PUMP - OPERATION, FUEL
....14-79
TRANSFER PUMP - REMOVAL, FUEL
.....14-83
TRANSFER PUMP PRESSURE -
DIAGNOSIS AND TESTING, FUEL
........14-80
TRANSMISSION - 42RE - ASSEMBLY,
AUTOMATIC
........................21-166TRANSMISSION - 42RE - CLEANING,
AUTOMATIC........................21-165
TRANSMISSION - 42RE - DESCRIPTION,
AUTOMATIC........................21-135
TRANSMISSION - 42RE - DISASSEMBLY,
AUTOMATIC........................21-160
TRANSMISSION - 42RE - INSPECTION,
AUTOMATIC........................21-165
TRANSMISSION - 42RE - INSTALLATION,
AUTOMATIC........................21-173
TRANSMISSION - 42RE - OPERATION,
AUTOMATIC........................21-137
TRANSMISSION - 42RE - REMOVAL,
AUTOMATIC........................21-159
TRANSMISSION - 44RE - ASSEMBLY,
AUTOMATIC........................21-337
TRANSMISSION - 44RE - CLEANING,
AUTOMATIC........................21-336
TRANSMISSION - 44RE - DESCRIPTION,
AUTOMATIC........................21-306
TRANSMISSION - 44RE - DISASSEMBLY,
AUTOMATIC........................21-331
TRANSMISSION - 44RE - INSPECTION,
AUTOMATIC........................21-337
TRANSMISSION - 44RE - INSTALLATION,
AUTOMATIC........................21-344
TRANSMISSION - 44RE - OPERATION,
AUTOMATIC
........................21-308
TRANSMISSION - 44RE - REMOVAL,
AUTOMATIC
........................21-330
TRANSMISSION - 46RE - ASSEMBLY,
AUTOMATIC
........................21-510
TRANSMISSION - 46RE - CLEANING,
AUTOMATIC
.........................21-509
TRANSMISSION - 46RE - DESCRIPTION,
AUTOMATIC
........................21-478
TRANSMISSION - 46RE - DISASSEMBLY,
AUTOMATIC
........................21-503
TRANSMISSION - 46RE - INSPECTION,
AUTOMATIC
........................21-510
TRANSMISSION - 46RE - INSTALLATION,
AUTOMATIC
........................21-518
TRANSMISSION - 46RE - OPERATION,
AUTOMATIC
........................21-480
TRANSMISSION - 46RE - REMOVAL,
AUTOMATIC
........................21-502
TRANSMISSION - 47RE - ASSEMBLY,
AUTOMATIC
........................21-681
TRANSMISSION - 47RE - CLEANING,
AUTOMATIC
........................21-680
TRANSMISSION - 47RE - DESCRIPTION,
AUTOMATIC
........................21-649
TRANSMISSION - 47RE - DISASSEMBLY,
AUTOMATIC
........................21-674
TRANSMISSION - 47RE - INSPECTION,
AUTOMATIC
........................21-681
TRANSMISSION - 47RE - INSTALLATION,
AUTOMATIC
........................21-688
TRANSMISSION - 47RE - OPERATION,
AUTOMATIC
........................21-651
TRANSMISSION - 47RE - REMOVAL,
AUTOMATIC
........................21-673
TRANSMISSION - CLEANING
..........21-109
TRANSMISSION - DIAGNOSIS AND
TESTING, AUTOMATIC
. . . 21-143,21-314,21-486,
21-657
TRANSMISSION - DIAGNOSIS AND
TESTING, MANUAL
..........21-3,21-46,21-93
TRANSMISSION - INSPECTION
....21-109,21-64
TRANSMISSION - INSTALLATION, SHIFT
BOOT - MANUAL
....................23-122
TRANSMISSION - REMOVAL, SHIFT
BOOT - MANUAL
....................23-122
TRANSMISSION CLUTCH AND BAND
OPERATION - DIAGNOSIS AND
TESTING, AIR CHECKING
.......21-147,21-318
TRANSMISSION CLUTCH AND BAND
OPERATION - DIAGNOSIS AND
TESTING, AIR TESTING
.........21-490,21-661
TRANSMISSION FILL - STANDARD
PROCEDURE
.....21-201,21-372,21-547,21-718
TRANSMISSION FLUID - DESCRIPTION,
AUTOMATIC
...........................0-5
TRANSMISSION FLUID - OPERATION,
AUTOMATIC
...........................0-5
36 INDEXBR/BE
Description Group-Page Description Group-Page Description Group-Page