2001 CHRYSLER VOYAGER radio antenna

TABLE OF CONTENTS - Continued
AUDIO
ALL OUTPUTS SHORTED...............................................189
AM SECTION.........................................................192
CASS ERROR.........................................................192
CASSETTE COMMUNICATION FAULT.....................................192
CASSETTE EJECT FAILURE.............................................192
CASSETTE LOADING FAILURE..........................................192
CASSETTE TAPE TENSION HIGH........................................192
CASSETTE TAPE TENSION LOW.........................................192
CD ERROR...........................................................192
CD MECHANICAL FAILURE.............................................192
FM SECTION..........................................................192
MICRO OUTPUT FAILURE..............................................192
RADIO ERROR........................................................192
*AM/FM SWITCH INOPERATIVE..........................................192
*ANY STATION PRESET SWITCH INOPERATIVE............................192
*BALANCE INOPERATIVE...............................................192
*CD EJECT SWITCH INOPERATIVE.......................................192
*EQUALIZER INOPERATIVE.............................................192
*FADER INOPERATIVE.................................................192
*FF/RW SWITCH INOPERATIVE..........................................192
*HOUR/MINUTE SWITCHES INOPERATIVE................................192
*PAUSE/PLAY SWITCH INOPERATIVE....................................192
*PWR SWITCH INOPERATIVE...........................................192
*SCAN SWITCH INOPERATIVE..........................................192
*SEEK SWITCH INOPERATIVE...........................................192
*SET SWITCH INOPERATIVE............................................192
*TAPE EJECT SWITCH INOPERATIVE.....................................192
*TIME SWITCH INOPERATIVE...........................................192
*TUNE SWITCH INOPERATIVE...........................................192
CD CHANGER MECHANICAL FAILURE....................................195
CD CHANGER PLAY FAILURE...........................................196
CD CHANGER READ FAILURE...........................................196
IMPROPER DISK IN CD CHANGER.......................................196
CD CHANGER POWER SUPPLY TOO HIGH................................197
CD CHANGER TEMPERATURE HIGH.....................................198
CD CHANGER TEMPERATURE LOW.....................................198
CD PLAY FAILURE.....................................................199
CD READ FAILURE....................................................199
IMPROPER DISK IN CD.................................................199
CD TEMPERATURE HIGH...............................................200
CD TEMPERATURE LOW...............................................200
FRONT OUTPUT SHORT................................................201
LEFT OUTPUT SHORT.................................................204
NBS OUTPUT 1 OPEN..................................................207
NBS OUTPUT 2 OPEN..................................................207
NBS OUTPUT 1 SHORT TO BATT........................................209
NBS OUTPUT 2 SHORT TO BATT........................................209
NO ANTENNA CONNECTION............................................211
NO VIN RECEIVED.....................................................212
VIN MISMATCH........................................................212
POWER SUPPLY TOO HIGH.............................................213
REAR OUTPUT SHORT.................................................214
vii

TABLE OF CONTENTS - Continued
FRONT BLOWER MOTOR RELAY.......................................1066
FRONT CONTROL MODULE - BLACK 49 WAY.............................1067
FRONT FOG LAMP RELAY.............................................1068
HEADLAMP WASHER RELAY (BUILT-UP-EXPORT).........................1068
NAME BRAND SPEAKER RELAY........................................1068
PARK LAMP RELAY...................................................1068
POSITIVE TEMPERATURE COEFFICIENTS...............................1068
REAR BLOWER MOTOR RELAY........................................1068
POWER FOLDING MIRROR SWITCH (BUILT-UP-EXPORT) - BLACK 2 WAY. . . .1069
POWER LIFTGATE MODULE C1 - BLACK 8 WAY..........................1069
POWER LIFTGATE MODULE C2 - BLACK/RED 20 WAY.....................1069
POWER LIFTGATE MOTOR - BLACK 10 WAY.............................1070
POWER SEAT CIRCUIT BREAKER (30A) - GRAY 2 WAY....................1070
POWERTRAIN CONTROL MODULE C1 (2.4L/3.3L/3.8L) - GRAY/BLACK
40-WAY.............................................................1071
POWERTRAIN CONTROL MODULE C2 (2.4L/3.3L/3.8L) - GRAY/GRAY 40 WAY .1072
RADIO C1 - GRAY 7 WAY..............................................1073
RADIO C2 - BLACK 7 WAY.............................................1073
RADIO C3 - WHITE/RED 2 WAY.........................................1073
RADIO C4-8WAY....................................................1074
RADIO CHOKE - LT. GRAY 2 WAY.......................................1074
REAR A/C-HEATER UNIT (3 ZONE HVAC) - LT. GREEN 10 WAY..............1074
REAR AUTO TEMP CONTROL SWITCH (ATC) - BLACK 13 WAY..............1075
REAR BLOWER MOTOR POWER MODULE C1 (ATC) - RED/BLACK 4 WAY. . . .1075
REAR BLOWER MOTOR POWER MODULE C2 (ATC) - BLACK 2 WAY.........1075
REAR DOME LAMP (EXCEPT LUXURY) - GRAY 3 WAY.....................1075
REAR MODE MOTOR (ATC) - GRAY 2 WAY...............................1076
REAR TEMPERATURE MOTOR (ATC) - GRAY 2 WAY.......................1076
RECIRCULATION DOOR ACTUATOR (ATC) - GRAY 2 WAY..................1076
RECIRCULATION DOOR ACTUATOR (MTC) - GRAY 2 WAY..................1076
REMOTE KEYLESS ENTRY ANTENNA (JAPAN) - BLACK 2 WAY..............1077
REMOTE KEYLESS ENTRY MODULE - BLACK/RED 6 WAY.................1077
RIGHT B-PILLAR SWITCH - GRAY 3 WAY.................................1077
RIGHT CINCH/RELEASE MOTOR (POWER SLIDING DOOR) - GRAY 4 WAY. . . .1077
RIGHT CYLINDER LOCK SWITCH - BLACK 2 WAY.........................1078
RIGHT DOOR SPEAKER - BLACK/RED 6 WAY............................1078
RIGHT FOG LAMP - WHITE 2 WAY......................................1078
RIGHT FRONT DOOR LOCK MOTOR/AJAR SWITCH (EXCEPT BASE) -
BLACK 4 WAY........................................................1078
RIGHT FRONT PARK/TURN SIGNAL LAMP (EXCEPT BUILT-UP-EXPORT) -
BLACK 3 WAY........................................................1079
RIGHT FULL OPEN SWITCH (POWER SLIDING DOOR) - BLACK 2 WAY.......1079
RIGHT HEADLAMP (EXCEPT BUILT-UP-EXPORT) - BLACK 3 WAY............1079
RIGHT HIGH BEAM LAMP (BUILT-UP-EXPORT) - BLACK 2 WAY..............1079
RIGHT INSTRUMENT PANEL SPEAKER - BLACK 2 WAY....................1080
RIGHT LOW BEAM LAMP (BUILT-UP-EXPORT) - BLACK 2 WAY..............1080
RIGHT PARK LAMP (BUILT-UP-EXPORT) - BLACK 2 WAY...................1080
RIGHT POWER MIRROR - BLACK 12 WAY................................1080
RIGHT REAR PILLAR SPEAKER - BLACK 2 WAY..........................1081
RIGHT REAR SPEAKER - BLACK/RED 6 WAY.............................1081
RIGHT REMOTE RADIO SWITCH - BLACK 2 WAY.........................1081
RIGHT SEAT AIRBAG - YELLOW 2 WAY..................................1081
RIGHT SIDE IMPACT AIRBAG CONTROL MODULE - YELLOW/RED 7 WAY.....1081
xxiii

Symptom:
NO ANTENNA CONNECTION
POSSIBLE CAUSES
BAD ANTENNA CONNECTION
TEST ANTENNA
RADIO
TEST ACTION APPLICABILITY
1 Turn the ignition off.
Disconnect the Radio Antenna connector.
Inspect the Radio Antenna connection.
Was the Antenna connection clean and tight?All
Ye s®Go To 2
No®Repair Antenna connection as needed.
Perform BODY VERIFICATION TEST - VER 1.
2 Refer to the Audio System in the service information and test the Antenna in
accordance with the service procedure.
Is the Antenna ok?All
Ye s®Go To 3
No®Repair or replace the Antenna assembly as necessary.
Perform BODY VERIFICATION TEST - VER 1.
3Note: Reconnect all previously disconnected components.
Turn the ignition and Radio on.
With the DRBIIIt, erase the audio DTC's, put the radio in scan mode and wait
approximately 2 minutes before proceeding.
With the DRBIIIt, read the audio DTC's.
Did this DTC reset?All
Ye s®Replace the Radio.
Perform BODY VERIFICATION TEST - VER 1.
No®Test Complete.
211
AUDIO

AUDIO
TABLE OF CONTENTS
page page
AUDIO
DESCRIPTION............................1
OPERATION.............................1
DIAGNOSIS AND TESTING..................1
ANTENNA BODY & CABLE
DESCRIPTION............................3
OPERATION.............................3
DIAGNOSIS AND TESTING..................3
REMOVAL...............................4
INSTALLATION............................4
CD CHANGER
DESCRIPTION............................6
OPERATION.............................6
REMOVAL...............................6
INSTALLATION............................6
CHOKE
DIAGNOSIS AND TESTING..................6
D-PILLAR SPEAKER
REMOVAL...............................6
INSTALLATION............................7
DASH PANEL SPEAKER
REMOVAL...............................7INSTALLATION............................7
DOOR MOUNTED SPEAKER
REMOVAL...............................7
INSTALLATION............................7
QUARTER PANEL SPEAKER
REMOVAL...............................8
INSTALLATION............................8
RADIO
DIAGNOSIS AND TESTING..................8
REMOVAL...............................9
INSTALLATION............................9
RADIO NOISE SUPPRESSION COMPONENTS
DESCRIPTION............................9
OPERATION.............................9
REMOTE SWITCHES
DESCRIPTION...........................10
OPERATION.............................10
DIAGNOSIS AND TESTING.................11
REMOVAL..............................11
INSTALLATION...........................12
AUDIO
DESCRIPTION
There are four different system combinations avail-
able on the RS models. The available radio options
are:
²AM/FM Cassette
²AM/FM Compact Disc with Compact Disc
Changer
²AM/FM Cassette with single Compact Disc
Player
²AM/FM Cassette with Compact Disc Changer
All factory installed radio receivers are stereo Elec-
tronically Tuned Radios (ETR) and include and elec-
tronic digital clock function.
OPERATION
Operating instructions for the factory installed
audio systems can be found in the Owner's Manual
provided with this vehicle.
DIAGNOSIS AND TESTING
WARNING:
ON VEHICLES EQUIPPED WITH AIRBAGS, REFER
TO ELECTRICAL, RESTRAINTS BEFORE ATTEMPT-
ING ANY STEERING WHEEL, STEERING COLUMN,
OR INSTRUMENT PANEL COMPONENT DIAGNOSIS
OR SERVICE. FAILURE TO TAKE THE PROPER
PRECAUTIONS COULD RESULT IN ACCIDENTAL
AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL
INJURY.
RSAUDIO8A-1

AUDIO SYSTEM DIAGNOSIS
CONDITION POSSIBLE CAUSE CORRECTION
NO AUDIO. 1. FUSE FAULTY. 1. CHECK RADIO FUSES IN FUSE BLOCK MODULE.
REPLACE FUSES, IF REQUIRED.
2. RADIO CONNECTOR
FAULTY.2. CHECK FOR LOOSE OR CORRODED RADIO CONNECTOR.
REPAIR, IF REQUIRED.
3. WIRING FAULTY. 3. CHECK FOR BATTERY VOLTAGE AT RADIO CONNECTOR.
REPAIR WIRING, IF REQUIRED.
4. GROUND FAULTY. 4. CHECK FOR CONTINUITY BETWEEN RADIO CHASSIS AND
A KNOWN GOOD GROUND. THERE SHOULD BE
CONTINUITY. REPAIR GROUND, IF REQUIRED.
5. RADIO FAULTY. 5. EXCHANGE OR REPLACE RADIO, IF REQUIRED.
6. SPEAKERS FAULTY. 6. SEE SPEAKER DIAGNOSIS, IN THIS GROUP.
NO DISPLAY. 1. FUSE FAULTY. 1. CHECK RADIO FUSES IN FUSE BLOCK MODULE.
REPLACE FUSES, IF REQUIRED.
2. RADIO CONNECTOR
FAULTY.2. CHECK FOR LOOSE OR CORRODED RADIO CONNECTOR.
REPAIR, IF REQUIRED.
3. WIRING FAULTY. 3. CHECK FOR BATTERY VOLTAGE AT RADIO CONNECTOR.
REPAIR WIRING, IF REQUIRED.
4. GROUND FAULTY. 4. CHECK FOR CONTINUITY BETWEEN RADIO CHASSIS AND
A KNOWN GOOD GROUND. THERE SHOULD BE
CONTINUITY. REPAIR GROUND, IF REQUIRED.
5. RADIO FAULTY. 5. EXCHANGE OR REPLACE RADIO, IF REQUIRED.
NO MEMORY. 1. FUSE FAULTY. 1. CHECK IGNITION-OFF DRAW FUSE. REPLACE FUSE, IF
REQUIRED.
2. RADIO CONNECTOR
FAULTY.2. CHECK FOR LOOSE OR CORRODED RADIO CONNECTOR.
REPAIR, IF REQUIRED.
3. WIRING FAULTY. 3. CHECK FOR BATTERY VOLTAGE AT RADIO CONNECTOR.
REPAIR WIRING, IF REQUIRED.
4. GROUND FAULTY. 4. CHECK FOR CONTINUITY BETWEEN RADIO CHASSIS AND
A KNOWN GOOD GROUND. THERE SHOULD BE
CONTINUITY. REPAIR GROUND, IF REQUIRED.
5. RADIO FAULTY. 5. EXCHANGE OR REPLACE RADIO, IF REQUIRED.
POOR RADIO
RECEPTION.1. ANTENNA FAULTY. 1. SEE ANTENNA DIAGNOSIS, IN THIS GROUP. REPAIR OR
REPLACE ANTENNA, IF REQUIRED.
2. GROUND FAULTY. 2. CHECK FOR CONTINUITY BETWEEN RADIO CHASSIS AND
A KNOWN GOOD GROUND. THERE SHOULD BE
CONTINUITY. REPAIR GROUND, IF REQUIRED.
3. RADIO FAULTY. 3. EXCHANGE OR REPLACE RADIO, IF REQUIRED.
8A - 2 AUDIORS
AUDIO (Continued)

CONDITION POSSIBLE CAUSE CORRECTION
4. POOR ANTENNA
CONNECTION AT
RADIO OR IN LINE.4. SEAT CONNECTOR.
NO/POOR TAPE
OPERATION.1. FAULTY TAPE. 1. INSERT KNOWN GOOD TAPE AND TEST OPERATION.
2. FOREIGN OBJECTS
BEHIND TAPE DOOR.2. REMOVE FOREIGN OBJECTS AND TEST OPERATION.
3. DIRTY CASSETTE
TAPE HEAD.3. CLEAN HEAD WITH MOPAR CASSETTE HEAD CLEANER.
4. FAULTY TAPE DECK. 4. EXCHANGE OR REPLACE RADIO, IF REQUIRED.
NO COMPACT
DISC
OPERATION1. FAULTY CD. 1. INSERT KNOWN GOOD CD AND TEST OPERATION.
2. FOREIGN MATERIAL
ON CD.2. CLEAN CD AND TEST OPERATION.
3. CONDENSATION ON
CD OR OPTICS.3. ALLOW TEMPERATURE OF VEHICLE INTERIOR TO
STABILIZE AND TEST OPERATION.
4. FAULTY CD PLAYER. 4. EXCHANGE OR REPLACE RADIO, IF REQUIRED.
ANTENNA BODY & CABLE
DESCRIPTION
All models use a fixed-length stainless steel rod-
type antenna mast, installed at the right front fender
of the vehicle. The antenna mast is connected to the
center wire of the coaxial antenna cable, and is not
grounded to any part of the vehicle.
OPERATION
To minimize static, the antenna base must have a
good ground. The coaxial antenna cable shield (the
outer wire mesh of the cable) is grounded to the
antenna base and the radio chassis.
The antenna coaxial cable has an additional dis-
connect, located near the right end of the instrument
panel. This additional disconnect allows the instru-
ment panel assembly to be removed and installed
without removing the radio.
The factory-installed Electronically Tuned Radios
(ETRs) automatically compensate for radio antenna
trim. Therefore, no antenna trimmer adjustment is
required or possible when replacing the receiver or
the antenna.
DIAGNOSIS AND TESTING
WARNING:
ON VEHICLES EQUIPPED WITH AIRBAGS, REFER
TO ELECTRICAL, RESTRAINTS BEFORE ATTEMPT-ING ANY STEERING WHEEL, STEERING COLUMN,
OR INSTRUMENT PANEL COMPONENT DIAGNOSIS
OR SERVICE. FAILURE TO TAKE THE PROPER
PRECAUTIONS COULD RESULT IN ACCIDENTAL
AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL
INJURY.
The ohmmeter test lead connections for each test
are shown in (Fig. 1).
Fig. 1 Antenna Test Points
RSAUDIO8A-3
AUDIO (Continued)

TEST 1
Test 1 determines of the antenna mast is insulated
from the base. Proceed as follows:
(1) Unplug the antenna coaxial cable from the
radio chassis and isolate. Remove the antenna mast.
(2) Connect an ohmmeter test lead to the inside
center of the antenna base. Connect the other test
lead to a metallic portion on the outside of the
antenna base. Check for continuity.
(3) There should be no continuity. If continuity is
found, replace the faulty or damaged antenna base
and cable assembly.
TEST 2
Test 2 checks the antenna for an open circuit as
follows:
(1) Unplug the antenna coaxial cable connector
from the radio chassis. Remove the antenna mast.
The painted mast prevents measurement directly
through the mast.
(2) Connect an ohmmeter test lead to the inside
center of the antenna base. Connect the other test
lead to the center pin of the antenna coaxial cable
connector.
(3) Continuity should exist (the ohmmeter should
only register a fraction of an ohm). High or infinite
resistance indicates damage to the base and cable
assembly. Replace the faulty base and cable if
required.
TEST 3
Test 3 checks the condition of the ground between
the antenna base and the vehicle body as follows:
(1) Connect one ohmmeter test lead to the fender
on an exposed metal area (paint and e-coat must be
penetrated to obtain continuity). Connect the other
test lead to the outer crimp on the antenna coaxial
cable connector.
(2) The resistance should be less than (1) ohm.
(3) If the resistance is more than (1) ohm, clean
and/or tighten the antenna base to the fender mount-
ing hardware.
REMOVAL
ANTENNA MAST AND CABLE LEAD
(1) Remove glove box from instrument panel,
(Refer to 23 - BODY/INSTRUMENT PANEL/GLOVE
BOX - REMOVAL).
(2) Disconnect antenna cable connector from exten-
sion cable (Fig. 2).
(3) Remove right kick trim panel.
(4) Disengage rubber grommet insulator from door
hinge pillar.
(5) Pull antenna cable through hinge pillar into
opening between door hinges.(6) Hoist and support vehicle on safety stands.
(7) Remove front wheel.
(8) Remove front wheelhouse splash shield. (Refer
to 23 - BODY/EXTERIOR/LF WHEELHOUSE
SPLASH SHIELD - REMOVAL).
(9) Remove antenna mast from antenna base (Fig.
3).
(10) Remove plastic cap from the cap nut. Using
cap nut tool, remove cap nut holding antenna base to
front fender (Fig. 4).
(11) Remove antenna base from under front fender.
ANTENNA EXTENSION CABLE
(1) Remove glove box. (Refer to 23 - BODY/IN-
STRUMENT PANEL/GLOVE BOX - REMOVAL).
(2) Disconnect extension cable end from antenna
cable end.
(3) Disconnect cable hanger clip from HVAC unit.
(4) Remove radio as necessary to gain access to
extension cable. (Refer to 8 - ELECTRICAL/AUDIO/
RADIO - REMOVAL).
(5) Disconnect extension cable from back of radio.
(6) Remove extension cable from vehicle.
INSTALLATION
ANTENNA MAST AND CABLE LEAD
(1) Install antenna base to underside of front
fender.
(2) Install cap nut holding antenna base to front
fender.
(3) Install plastic cap to the cap nut.
(4) Install antenna mast to antenna base.
(5) Install front wheelhouse splash shield.
(6) Install front wheel.
(7) Lower vehicle.
(8) Push antenna cable through opening in hinge
pillar.
(9) Insert rubber grommet into door hinge pillar.
(10) Install kick panel.
(11) Connect antenna cable connector to extension
cable.
(12) Install glove box to instrument panel.
ANTENNA EXTENSION CABLE
(1) Install extension cable to vehicle.
(2) Connect extension cable to back of radio.
(3) Install radio. (Refer to 8 - ELECTRICAL/AU-
DIO/RADIO - INSTALLATION).
(4) Connect cable hanger clip to HVAC unit.
(5) Connect extension cable end to antenna cable
end.
(6) Install glove box. (Refer to 23 - BODY/IN-
STRUMENT PANEL/GLOVE BOX - INSTALLA-
TION).
8A - 4 AUDIORS
ANTENNA BODY & CABLE (Continued)

Fig. 2 Antenna Cable
1 - CAP NUT
2 - ADAPTER
3 - FENDER
4 - CABLE TO RADIO (EXTENSION CABLE)
5 - A-PILLAR6 - RUBBER GROMMET
7 - ANTENNA CABLE AND BODY ASSEMBLY
8 - RUBBER GROMMET
Fig. 3 Antenna Mast
1 - ANTENNA MAST
2 - ADAPTER
3 - CAP NUTFig. 4 Antenna Cap Nut
1 - CAP NUT
2 - ANTENNA ADAPTER
3 - TOOL
RSAUDIO8A-5
ANTENNA BODY & CABLE (Continued)