2000 TOYOTA CAMRY brake sensor

[x] Cancel search: brake sensor

Page 7 of 4770

TOYOTA CAMRY 2000  Service Repair Manual 3
CAMRY ± OUTLINE OF NEW FEATURES27
8. Brakes
The specifications of the front and rear brakes have been changed.
9. Suspension
The front and rear springs, stabilizers, and shock absorbers have been m

Page 72 of 4770

TOYOTA CAMRY 2000  Service Repair Manual Troubleshooting
If the CO/HC concentration does not comply with
regulations, perform troubleshooting in the order
given below.
(a) Check oxygen sensor operation.
(See page EG1±231)
(b) See the table

Page 96 of 4770

TOYOTA CAMRY 2000  Service Repair Manual 17. DISCONNECT VACUUM HOSES
Disconnect the following hoses:
(1) MAP sensor hose from air intake chamber
(2) Brake booster vacuum hose from air intake cha±
mber
(3) PS vacuum hose from air intake cham

Page 127 of 4770

TOYOTA CAMRY 2000  Service Repair Manual 25. INSTALL EGR VALVE AND VACUUM MODULATOR
(a) Install a new gasket and the EGR valve with the union
nut and 2 nuts.
Union nut:
Torque: 59 N±m (600 kgf±cm, 43 ft±lbf)
        Nut:
Torque: 13 N±m (

Page 137 of 4770

TOYOTA CAMRY 2000  Service Repair Manual 17. M/T:
REMOVE CLUTCH RELEASE CYLINDER WITHOUT
DISCONNECTING TUBE
Remove the 4 bolts, release cylinder and tube from
the transaxle.15. DISCONNECT FUEL INLET HOSE
CAUTION: Catch leaking fuel in a cont

Page 181 of 4770

TOYOTA CAMRY 2000  Service Repair Manual 19. M/T:
INSTALL CLUTCH RELEASE CYLINDER
Install the release cylinder and tube with the 4 bolts.
20. M/T:
INSTALL STARTER17. CONNECT VACUUM HOSES
(a) MAP sensor hose to air intake chamber
(b) Brake bo

Page 243 of 4770

TOYOTA CAMRY 2000  Service Repair Manual 10. DISCONNECT VACUUM HOSES
Disconnect the following hoses:
(1) MAP sensor hose from air intake chamber
(2) Brake booster vacuum hose from air intake chamber
(3) Vacuum sensing hose from fuel pressure

Page 249 of 4770

TOYOTA CAMRY 2000  Service Repair Manual 4. CONNECT ENGINE WIRE HARNESS WITH WIRE
CLAMP AND BOLT
5. CALIFORNIA ONLY:
CONNECT VSV (FOR FUEL PRESSURE CONTROL)
CONNECTOR AND VACUUM HOSES
6. CONNECT KNOCK SENSOR AND VSV (FOR EGR)
    CONNECTORS
Page:   1-8 9-16 17-24 25-32 33-40 ... 112 next >