2000 TOYOTA CAMRY lights

Door lock control (Lock and unlock) and panic control (Theft alarm and flash) is performed by remote control, without the
ignition key inserted in the door key cylinder, using low±power electrical waves emitted by a transmitter.
1. WIRELESS DOOR LOCK OR UNLOCK NORMAL OPERATION
With the ignition key not inserted into the ignition key cylinder (Unlock warning SW off) and all the doors completely closed,
when the lock or unlock button (Transmitter) is pushed, the wireless door lock ECU receives the electrical waves from the
transmitter, causing it to operate.
As a result, the ECU judges whether the door is locked or unlocked based on the signal from the door lock motor and door
unlock detection SW, and sends a signal to the theft deterrent ECU and integration relay to switch the condition from lock to
unlock or vice versa, causing the door lock motor to operate.
2. VISUAL CONFIRMATION OF LOCK OR UNLOCK
If all doors indicate that they are locked after the lock command, parking lights and taillight will flash once. If any door
indicates that it is open after the unlock command, parking lights and taillights will flash twice.
3. WIRELESS DOOR UNLOCK OPERATION
Pushing the unlock button (Transmitter) once, driver's door is unlocked. Furthermore, pushing the button again within 3
seconds, the other doors are unlocked.
4. AUTOMATIC LOCK OPERATION
With the ignition key not inserted into the ignition key cylinder (Unlock warning SW off) and all the doors completely closed,
after pushing the button (Transmitter) to unlock all the doors, if a door is not opened within 30 seconds, all the doors will be
automatically relocked.
5. WIRELESS CONTROL STOP FUNCTION
If a door is open (Door courtesy SW on), a signal is input from the door courtesy SW to the wireless door lock ECU, stopping
wireless door lock or unlock.
If the ignition key is in the ignition key cylinder (Unlock warning SW on), the unlock warning SW inputs a signal to the
wireless door lock ECU, stopping wireless door lock or unlock.
6. DOOR LOCK MOTOR PROTECTIVE FUNCTION
If the door lock or unlock condition does not change after wireless door lock or unlock operation, 2 seconds later, the
integration relay ECU sends current three times to the door lock motor. If the door lock condition still has not changed as a
result, the wireless door lock ECU stops reception and stops door lock and unlock function.
7. REMOTE PANIC OPERATION
Panic will function when doors are locked or unlocked, open or closed. When the panic button (Transmitter) is pushed once,
theft alarm sounds and headlights and taillight flash. Then, the panic or the unlock button (Transmitter) is pushed once more,
sounding and flashing will stop. Panic will not function when ignition key is in ignition key cylinder.
D12, D13, D14, D15 DOOR COURTESY SW FRONT LH, RH, REAR LH, RH
1±GROUND : Continuity with the door open
U1 UNLOCK WARNING SW
2±1 : Continuity with the ignition key in the cylinder
W6 WIRELESS DOOR LOCK ECU
8±GROUND : Always approx. 12 volts
1±GROUND : Always continuity
14±GROUND : Continuity with each of the door open
10±GROUND : Continuity with the ignition key in the cylinder
SYSTEM OUTLINE
SERVICE HINTS

WIRELESS DOOR LOCK CONTROL (TMMK MADE)
100A ALT
F 1
A 125A
DOORFROM POWER SOURCE SYSTEM (
SEE PAGE 50)
1D 1
7. 5A DOME
2J 12 32 51
1C 6
1B 4
IG1 10
A BAB
B B1W 1
1G 8
B CBC
A AA E
B DBDB EBE
A DADAD
JUNCTION
CONNECTORB J33 J34A
JUNCTION
CONNECTORB J33 J34A
JUNCTION
CONNECTORB J16 J17A
J UNCTION
CONNECTORB J33 J34A
1111IN2 8IN26A EAE
B D
JUNCTION
CONNECTORB J33 J34A
DIODE (
COURTESY) D 7
DOOR COURTESY SW
RE AR RH D15
DOOR COURTESY SW
FRONT RH D13
DOOR COURTESY SW
RE AR LH D14
DOOR COURTESY SW
FRONT LH D12
G± R
L±W
R
R±W
R±W
R
G± R
L±W
R±W
R±W
R±G
R±G R±G
B±GB±R
G±R G±R G±R
G±R
L±W
RRL±W
R L±WG± R R±W
R±G R±GR±W
R±W
R±G
R±W R±W R±W
R±W R±WR
R±W A
2 A
1
R±G
JUNCTION
CONNECTOR J 2
FUSIBLE
LINK BLOCKF F 4 F 9A TAI LL IGHT
RELAY
BATTERY FL MAIN
3. 0W10A
TAIL
1S 8 1C 9
G G±O
TO FRONT PARK ING
LIGHTS
TO TAI LL I GHTS
L±W2 1
R±Y
DIODE
(
DOME) D10
E 3
F 2
B±R
B±R
,
, ,
,
,
,

Door lock control (Lock and unlock) and panic control (Theft alarm and flash) is performed by remote control, without the
ignition key inserted in the door key cylinder, using low±power electrical waves emitted by a transmitter.
1. WIRELESS DOOR LOCK OR UNLOCK NORMAL OPERATION
With the ignition key not inserted into the ignition key cylinder (Unlock warning SW off) and all the doors completely closed,
when the lock or unlock button (Transmitter) is pushed, the wireless door lock ECU receives the electrical waves from the
transmitter, causing it to operate.
As a result, the ECU judges whether the door is locked or unlocked based on the signal from the door lock motor and door
unlock detection SW, and sends a signal to the theft deterrent ECU and integration relay to switch the condition from lock to
unlock or vice versa, causing the door lock motor to operate.
2. VISUAL CONFIRMATION OF LOCK OR UNLOCK
If all doors indicate that they are locked after the lock command, parking lights and taillight will flash once. If any door
indicates that it is open after the unlock command, parking lights and taillights will flash twice.
3. WIRELESS DOOR UNLOCK OPERATION
Pushing the unlock button (Transmitter) once, driver's door is unlocked. Furthermore, pushing the button again within 3
seconds, the other doors are unlocked.
4. AUTOMATIC LOCK OPERATION
With the ignition key not inserted into the ignition key cylinder (Unlock warning SW off) and all the doors completely closed,
after pushing the button (Transmitter) to unlock all the doors, if a door is not opened within 30 seconds, all the doors will be
automatically relocked.
5. WIRELESS CONTROL STOP FUNCTION
If a door is open (Door courtesy SW on), a signal is input from the door courtesy SW to the wireless door lock ECU, stopping
wireless door lock or unlock.
If the ignition key is in the ignition key cylinder (Unlock warning SW on), the unlock warning SW inputs a signal to the
wireless door lock ECU, stopping wireless door lock or unlock.
6. DOOR LOCK MOTOR PROTECTIVE FUNCTION
If the door lock or unlock condition does not change after wireless door lock or unlock operation, 2 seconds later, the
integration relay ECU sends current three times to the door lock motor. If the door lock condition still has not changed as a
result, the wireless door lock ECU stops reception and stops door lock and unlock function.
7. REMOTE PANIC OPERATION
Panic will function when doors are locked or unlocked, open or closed. When the panic button (Transmitter) is pushed once,
theft alarm sounds and headlights and taillight flash. Then, the panic or the unlock button (Transmitter) is pushed once more,
sounding and flashing will stop. Panic will not function when ignition key is in ignition key cylinder.
D12, D13, D14, D15 DOOR COURTESY SW FRONT LH, RH, REAR LH, RH
1±GROUND : Continuity with the door open
U1 UNLOCK WARNING SW
2±1 : Continuity with the ignition key in the cylinder
W6 WIRELESS DOOR LOCK ECU
8±GROUND : Always approx. 12 volts
1±GROUND : Always continuity
14±GROUND : Continuity with each of the door open
10±GROUND : Continuity with the ignition key in the cylinder
SYSTEM OUTLINE
SERVICE HINTS

5A
STARTER FROM POWER SOURCE SYSTEM (
SEE PAGE 50)
1J 3
IJ1 5IF2 5 IG2 5IG317 IG23
IK2 3 C 9B 2
B 5C10 A4C4C11 A3B7C3A5A12
EB 2 1 II2 11A B
B C
IG1 6
11
IG1 7
12 1
IG
R±Y
B±W
GR
B±O Y±B Y±B
O O
R±W
R±L
P±L
Y±G P±L P±L W±B
Y±G
R±W R±W R±W
R±W W±B
B±W
B±WB±W
B±O
R±W
R±W R±W
R±W PARK /NEUTRAL
POSITION SW P 1
OIL PRESSURE
SW O 1
PARKING
BRAKE SW P 3 CLUTCH START SW C 7
WASHER LEVEL
WARNING SW W 1
JUNCTION
CONNECTOR J 2
BRAKE FLUID
LEVEL WARNING SW B 2
JUNCTION
CONNECTOR J11L
LG
G± O
B5
B B6
2B B
BFROM THEFT
DETERRENT ECU SECURITY
OIL
CRUISE
SEAT BELT
ABS
WASHER LEVEL
REAR LIGHTS
BRAKE
BULB
CHECK
RELAY
TRAC OFF
SLIP
O/D OFF
(
A/T)
(
M/T) JUNCTION
CONNE CTOR J29
(
M/T) (
A/T)
P
N
(
*5)
(
*6) (
*3)
(
*4)
(
*4)PKB BRK
A
TO CRUISE
CONTROL ECU
TO INTEGRATION
RELAY
TO ABS ECU
TO ABS AND TRACTION ECU
TO ABS ACTUATOR AND ECU
TO LI GHT
FAI LURE
SENSORTO ABS AND
TRACTION
ECU
GR
(
A/T)
II2 10
GR
B±O
B±O(
*5 A/T)
(
*6 A/T)
TO O/D
MAIN SWJ 7
JUNCTION
CONNECTORB A, J 8
C 8
COMBINA TION METERB A, C 9 C, C10* 1 : 1 MZ± FE
* 2 : 5S±FE
* 3 : W/O DAYTIME RUNNING LIGHT
* 4 : W/ DAYTIME RUNNING LIGHT
* 5 : TMC MADE
* 6 : TMMK MADE
B 4(
*2) A 18(
*1)
A 8(
*1)
B 14(
*2)
B D 6 , A
DAY TIME RUNNING
LIGHT RELAY (
MAIN)

J
5
678
25 CAMRY (
Cont' d)
11
B
7
C
13
C
6
B
3
B
5
C
2
A
1
A R
R±L
Y±R
G±W
BR
BR
IJ13
IJ16
IJ12
IJ178
C
6
C
15
B Y±G
P
LR
R±L
Y± R
G±W
BR
BR
Y±G
B±O
P
L
4
A4
C2
C 11
C2
B4
B3
A7
B
IG317
IK23
2 1
EBLeft radiat or
side support IGInstrument
panel br ace
LH 2 1IG23
IG16
7IG16
A
11
A
7
A
8
A 10
A
9
A
9
C
5
A
3
C
10
B
12
A
13
B 12
B 10
C9
B8
B5
B 16
B 13
A1
C1
B 14
B 12
C L
2
D
N
R
P
SLI P
TRAC OFF
DOOR
O/D OFF See Illuminat ion
System< 10±4>
A
R±W R± W
W± B R±WW± B
R±W
R±W R±W
B±O
P± L P±L P± LB±O(
*4) R± W (
*6)
(
*7)J 2
JUNCTI ON
CONNE CT OR
Fro m Da yti me
Running Light
Re la y(
Main)
< 7±2>
B
BB
(
*6)
J11
JUNCTION
CONNECTOR
B 2
BRAKE FLUID LEVEL
WARNING SWP 3
PARKING BRAKE SW W 1
WASHER L EVEL
WARNING SW
From Day time Running
Light Relay(
Main)
< 7±2>
Fr om Park /Neutral
Pos it ion SW(
A/T)
or
Clutch Start SW(
M/T)
<1±2>GR(
*3)
See Key Reminder and Seat Belt
Warning System< 21±3> See ABS(
TMC Made)
System< 19±2>
See ABS(
TMMK Made)
System< 20±2>
See ABS and Tr act ion
Control System< 18±1>See Engine Cont rol and
Immobiliser System< 2±3> < 3±2>See Charging
System< 1±4> See Taillight
System< 11±4>
SRS CRUISE HIGH BEAMOIL
SEAT BELTABS MA LF UNCT I ON I NDI CA TOR
LAMPWASHER LEVELBULB
CHE CK
RE L AY REAR LIGHTSBRAKE
CHARGETURN RHTURN LH ILLUMINATION
TRIP METER
ODOMETER
(
*5) TACHOMETERWATER
TEMP. FUEL
FUEL
SECURI TYSee Electronically Controlled
Transmission and A/T
Indicator System
<4±4><5±4>
See ABS and
Tr act ion Contr ol
Sy st em< 18±1>
See Tur n Signal and
Hazard Warning Light
Sy st em< 8±2> < 8±3>
See Headlight
Sy st em< 6±3> < 7±3>
Se e SRS Sy st e m
< 28±4> See Theft Deterrent
System< 15±3>
See Interior Light
System< 9±4>
See Electronically Controlled
Transmiss ion and A/T Indicator
System< 4±3> < 5±3>
See Illumination Sy st em
< 10±4>
IG33
V± W V± W
V±W V±WB B
B J15
JUNCTION
CONNE CT ORFrom Cruise Control
ECU< 17±4> From Engine Contr ol
Module
< 2±7> < 3±9> < 4±3> < 5±3>
IJ15
1
See Cruise Control
System< 17±2> Y±B Y±B
IF Left kick
panel
O 1
OIL PRESSURE SWJ 5
JUNCTI ON
CONNE CTOR
W± B W± B
A A See Char ging Sys tem
< 1±4> A
B
C
D
E
F
G
H
I* 4 : TMMK Made, TMC Made USA w/ Traction Control
* 5 : Speedometer * 3 : Except * 4
W± B IG36
1
Combination M eter
B±O From Engine
Control Module
< 2±12> < 3±9>
C 8 C 9,
COMBINATION METERABC10, C* 6 : w/ Daytime Running Light
* 7 : w/o Day time Running Light
Fr om A/C Contr ol
Assembly< 29±5>V±W

N19466
ON OFF
2
1
AC2CO±01
N19484
ON
OFF
2
1 4
N19467
ON
OFF
I12282
75
I12283
75
3
± AIR CONDITIONINGAIR CONDITIONING CONTROL ASSEMBLY (Manual
A/C)AC±97
2585 Author: Date:
2001 CAMRY (RM819U)
INSPECTION
1. INSPECT A/C INDICATOR OPERATION
(a) Connect the positive (+) lead from the battery to terminal
2 and the negative (±) lead to terminal 1.
(b) Push the A/C button in and then check that the indicator
lights up.
If operation is not as specified, replace the switch.
2. INSPECT DIMMING OPERATION
(a) Connect the positive (+) lead from the battery to terminal
2 and the negative (±) lead to terminal 1 while press the
switch.
(b) Connect the positive (+) lead from battery to terminal 4
and then check that the indicator dims.
If operation is not as specified, replace the switch.
3. INSPECT A/C SWITCH CONTINUITY
Condition/ CircuitTester connectionSpecified condition
OFF±No continuity
ON2 ± 5Continuity
Illumination circuit3 ± 4Continuity
Switch continuity:
If continuity is not as specified, replace the switch.
Illumination circuit:
If continuity is not as specified, replace the bulb.
4. INSPECT REC INDICATOR OPERATION
(a) Connect the positive (+) lead from the battery to terminal
5 and the negative (±) lead to terminal 7.
(b) Push the Air Intake button and the check that the indicator
lights up.
If operation is not as specified, replace the switch.
5. INSPECT DIMMING OPERATION
(a) Connect the positive (+) lead from the battery to terminal
5 and the negative (±) lead to terminal 7.
(b) Push the Air Intake button, then the indicator lights up.
(c) Connect the positive (+) lead from the battery to terminal
3 and then check that the indicator dims.
If operation is not as specified, replace the switch.

± AIR CONDITIONINGTROUBLESHOOTING
AC±15
2497 Author: Date:
Cool air comes out only at high engine rpm
1. Refrigerant volume
2. Drive belt
3. Magnetic clutch
4. Compressor
5. Condenser
6. Condenser fan
7. Receiver
8. Expansion valve
9. Evaporator
10.Thermistor
11. Refrigerant line
12.Pressure switch
13.*
1 ECM
*2 A/C amplifier
AC±3
AC±16
AC±16
AC±39
AC±52
AC±74
AC±49
AC±59
AC±30
AC±24
AC±21
AC±67
DI±218
AC±88
No engine idle±up when A/C switch ON
1. *1 ECM
*2 A/C amplifier
2. Wire harness
DI±218
AC±88
±
Blinking of A/C indicator
1. *1 ECM
*2 A/C amplifier
2. Thermistor
3. Compressor
DI±218
AC±88
AC±24
AC±39
A/C indicator does not lights up when turn mode switch to DEF.
position
1. A/C Fuse
2. Mode switch
3. A/C switch
4. *
1 ECM
*2 A/C amplifier
5. Wire harness
±
AC±84
AC±84
DI±218
AC±88
±
No warm air comes out
1. Engine coolant volume
2. A/C control assembly
3. Heater radiator±
AC±80
AC±57
No condenser fan operation
1. CDS FAN Fuse
2. Engine main relay
3. Cooling fan relay No. 1
4. Cooling fan relay No. 2
5. Cooling fan relay No. 3
6. Condenser fan motor
7. Pressure switch
8. *
1 Engine coolant temp. switch
*2 No. 1 Engine coolant temp. switch
9. *2No. 2 Engine coolant temp. switch
10.Wire harness
±
±
AC±72
AC±72
AC±72
AC±74
AC±67
AC±92
AC±92
AC±92
±
*1: 5S±FE Engine Models
*
2: 1MZ±FE Engine Models

AC0NG±02
N19466
ON OFF
2
1
N19484
ON
OFF
2
1 4
N19467
ON
OFF
N19464
M1
M2 AC±84
± AIR CONDITIONINGAIR CONDITIONING CONTROL ASSEMBLY
2566 Author: Date:
INSPECTION
1. INSPECT A/C INDICATOR OPERATION
(a) Connect the positive (+) lead from the battery to terminal
2 and the negative (±) lead to terminal 1.
(b) Push the A/C button in and then check that the indicator
lights up.
If operation is not as specified, replace the switch.
2. INSPECT DIMMING OPERATION
(a) Connect the positive (+) lead from the battery to terminal
2 and the negative (±) lead to terminal 1 while press the
switch.
(b) Connect the positive (+) lead from battery to terminal 4
and then check that the indicator dims.
If operation is not as specified, replace the switch.
3. INSPECT A/C SWITCH CONTINUITY
Condition/ CircuitTester connectionSpecified condition
OFF±No continuity
ON2 ± 5Continuity
Illumination circuit3 ± 4Continuity

Switch continuity:
If continuity is not as specified, replace the switch.

Illumination circuit:
If continuity is not as specified, replace the bulb.
4. INSPECT BLOWER SPEED CONTROL SWITCH CON-
TINUITY
Position/ CircuitTester connectionSpecified condition
OFF±No continuity
LO1 ± 3Continuity
M11 ± 3 ± 4Continuity
M21 ± 3 ± 8Continuity
HI1 ± 3 ± 5Continuity
Illumination circuit6 ± 7Continuity
If continuity is not as specified, replace the switch.