2000 TOYOTA CAMRY rear suspension

8
MAJOR COMPONENTS
The basic components of the new and previous Camry are as follows:
Model
NEWPREVIOUSItemNEWPREVIOUS
Drive SystemFF (Front Engine Wheel Drive)u
Type5S±FE: In±Line 4, 2.2±Literu
Displacement cm3 (cu. in.)2164 (132.0)u
Valve Mechanism16 Valves, DOHCu
eFuel SystemSFIu
n±Line
Engine
Max. Output [SAE±NET]
kW @ rpm (HP @ rpm)99 @ 5200 (133 @ 5200)
97 @ 5200 (130 @ 5200)*93 @ 5400 (125 @ 5400)
In± 4
E
Max. Torque [SAE±NET]
N
.m @ rpm (ft.lbf @ rpm)
199 @ 4400 (147 @ 4400)
197 @ 4400 (145 @ 4400)*197 @ 4400 (145 @ 4400)
Type1MZ±FE: V6, 3.0±Literu
Displacement cm3 (cu. in.)2995 (182.7)u
Valve Mechanism24 Valves, DOHCu
Fuel SystemSFIu
Engine
Max. Output [SAE±NET]
kW @ rpm (HP @ rpm)145 @ 5200 (194 @ 5200)140 @ 5200 (188 @ 5200)
V6
E
Max. Torque [SAE±NET]
N
.m @ rpm (ft.lbf @ rpm)283 @ 4400 (209 @ 4400)275 @ 4400 (203 @ 4400)
ClutchDry Type Single Plateu
Transaxle
Manual S51: 5±Speed (For 5S±FE)
E153: 5±Speed (For 1MZ±FE) S51: 5±Speed (For 5S±FE)
AutomaticA140E: 4±Speed (For 5S±FE)
A541E: 4±Speed (For 1MZ±FE)u
FrontVentilated Discu
BrakesRearSXV20 Series : Leading Trailing Drum
MCV20 Series : Solid Disc
SXV10 Series without ABS:
Leading Trailing Drum
SXV10 Series with ABS
and MCV10 Series: Solid Disc
Suspension4±Wheel MacPherson Strutu
SteeringGear TypeRack and PinionuSteeringPower SteeringEngine Revolution Sensing Typeu
*: California Specification Model

120APPENDIX
MAJOR TECHNICAL SPECIFICATIONS
Item AreaU.S.A..
.Body Type4±Door SedanVehicle GradeCELEXLEModel CodeSXV20L±CEMDKASXV20L±CEPDKASXV20L±A(C)EPNKASXV20L±A(C)EPGKALength mm (in.)4785(188.4)uuu
OverallWidth mm (in.)1780(70.1)uuuOverallHeight* mm (in.)1415 (55.7)uuuWheel Base mm (in.)2670(105.1)uuu
TreadFront mm (in.)1545 (60.8)uuuTreadRear mm (in.)1520 (59.8)uuu
Effective Head RoomFront mm (in.)1105 (43.5)uuuEffective Head RoomRear mm (in.)902 (35.5)uuu
sEffective Leg RoomFront mm (in.)980 (38.6)uuu
ghtsEffective Leg RoomRear mm (in.)940 (37.0)uuu
Weig
h
Shoulder RoomFront mm (in.)1427 (56.2)uuu
icle WShoulder RoomRear mm (in.)1425 (56.1)uuu
VehicOverhangFront mm (in.)970 (38.2)uuu
s & VeOverhangRear mm (in.)1140 (44.9)uuu
sions
&Min.. Running Ground Clearance mm (in.)145 (5.7)uuu
mensioAngle of Approach degrees175uuu
DimeAngle of Departure degrees175uuu
ajor DFront kg (lb)820 (1808)840 (11852)860 (1896)*1, 865 (1970)*2865 (1907)*1, 870 (1918)*2
MajoCurb WeightRear kg (lb)530 (1168)u530 (1168)*1, 535 (1179)*2
530 (1168)*1, 535 (1179)*2
MCurb WeightTotal kg (lb)1350 (2976)1370 (3020)1390 (3064)*1, 1400 (3086)*2
1395 (3075)*1, 1405 (3097)*2
Front kg (lb)980 (2161)uuuGross Vehicle WeightRear kg (lb)870 (1918)uuuGross Vehicle WeightTotal kg (lb)1850 (4079)uuuFuel Tank Capacityl (U.S. gal., Imp. gal.)70 (18.5, 15.4)uuuLuggage Compartment Capacity m3 (cu. ft.)0.399 (14.1)uuuMax. Speed km/h (mph)180 (112)uuuMax. Cruising Speed km/h (mph)ÐÐÐÐ
Acceleration0 to 100 km/h sec.ÐÐÐÐ
ceAcceleration0 to 400 m sec.ÐÐÐÐ
mance1st Gear km/h (mph)52 (32)69 (43)uu
rform
a
Max Permissible Speed2nd Gear km/h (mph)93 (58)125 (78)uuPerfoMax. Permissible Speed3rd Gear km/h (mph)147 (91)ÐÐÐP4the Gear km/h (mph)ÐÐÐÐTurning DiameterWall to Wall m (ft.)11.5 (37.7)uuuTurning Diameter(Outside Front)Curb to Curb m (ft.)11.0 (36.1)uuuEngine Type5S±FEuuuValve Mechanism16±Valve, DOHCuuuBore x Stroke mm (in.)87.0x91.0(3.43x3.58)uuu
eDisplacement cm3 (cu. in..)2164 (132.0)uuu
ngineCompression Ratio9.5 : 1uuuEngCarburetor TypeSFIuuuResearch Octane No. RON91uuuMax. Output (SAE±NET) kW/rpm (HP @ rpm)99/5200(133@5200),97/5200(130@5200)*3uuuMax. Torque (SAE±NET) N.m/rpm (lb±ft @ rpm)199/4400(147@4400,197/4400(145@44003uuu
alBattery Capacity (5HR) Voltage & Amp. hr.12±52, 12±48*4uuu
ginectric a lGenerator Output Watts960uuuEnginElectrStarter Output kW1.4uuuClutch TypeDry, Single PlateÐÐÐTransmission TypeS51A140Euu
uIn First3.5382.810uuIn Second1.9601.549uu
Transmission Gear RatioIn Third1.2501.000uuTransmission Gear RatioIn Fourth0.9450.706uuIn Fifth0.731ÐÐÐIn Reverse3.1532.296uuCounter Gear RatioÐ0.945uuDifferential Gear Ratio (Final)3.944uuu
ssisBrake TypeFrontVentilated Discuuu
ChassiBrake TypeRearL.T. DrumuuuChParking Brake TypeDrumuuuBrake Booster Type and Style in.Tandem 8º + 9ºuTandem 8.5º + 8.5º*1,
8º
+
9º*2uProportioning Valve TypeDual±P Valveuuu
Suspension TypeFrontMacPherson StrutuuuSuspension TypeRearMacPherson Strutuuu
Stabilizer BarFrontSTDuuuStabilizer BarRearSTDuuuSteering Gear TypeRack & PinionuuuSteering Gear Ratio (Overall)17.4 : 1uuuPower Steering TypeIntegral Typeuuu
* : Unladen Vehicle, *1 : Produced by TCM, *2 : Produced by TMM, *3 : California Specification Model, *4
: Without Cold Area Specification Model

122APPENDIX
Item AreaCanadaBody Type4±Door SedanVehicle GradeLECELEModel CodeSXV20L±CEPNKKMCV20L±CEPDKKMCV20L±CEPNKKLength mm (in.)4785 (188.4)uu
OverallWidth mm (in.)1780 (70.1)uuOverallHeight* mm (in.)1415 (55.7)1420 (55.9)uWheel Base mm (in.)2670 (105.1)uu
TreadFront mm (in.)1545 (60.8)uuTreadRear mm (in.)1520 (59.8)uu
Effective Head RoomFront mm (in.)1105 (43.5)uuEffective Head RoomRear mm (in.)902 (35.5)uu
sEffective Leg RoomFront mm (in.)980 (38.6)uu
ghtsEffective Leg RoomRear mm (in.)940 (37.0)uu
Weig
h
Shoulder RoomFront mm (in.)1427 (56.2)uu
icle WShoulder RoomRear mm (in.)1425 (56.1)uu
VehicOverhangFront mm (in.)970 (38.2)uu
s & VeOverhangRear mm (in.)1140 (44.9)uu
sions
&Min.. Running Ground Clearance mm (in.)145 (5.7)148 (5.8)u
mensioAngle of Approach degrees175uu
DimeAngle of Departure degrees175uu
ajor DFront kg (lb)865 (1907)890 (1962)920 (2028)MajoCurb WeightRear kg (lb)535 (1179)540 (1191)uMCurb WeightTotal kg (lb)1400 (3086)1430 (3153)1460 (3219)Front kg (lb)980 (2161)1035 (2282)uGross Vehicle WeightRear kg (lb)870 (1918)875 (1929)uGross Vehicle WeightTotal kg (lb)1850 (4079)1910 (4211)uFuel Tank Capacityl (U.S. gal., Imp. gal.)70 (18.5, 15.4)uuLuggage Compartment Capacity m3 (cu. ft.)0.399 (14.1)uuMax. Speed km/h (mph)180 (112)210 (130)uMax. Cruising Speed km/h (mph)ÐÐu
Acceleration0 to 100 km/h sec.ÐÐÐ
ceAcceleration0 to 400 m sec.ÐÐÐ
mance1st Gear km/h (mph)69 (43)70 (43)u
rform
a
Max Permissible Speed2nd Gear km/h (mph)125 (78)127 (79)uPerfoMax. Permissible Speed3rd Gear km/h (mph)ÐÐÐP4th Gear km/h (mph)ÐÐÐTurning DiameterWall to Wall m (ft.)11.5 (37.7)11.9 (39.0)uTurning Diameter(Outside Front)Curb to Curb m (ft.)11.0 (36.1)11.4 (37.4)uEngine Type5S±FE1MZ±FEuValve Mechanism16±Valve, DOHC24±Valve, DOHCuBore x Stroke mm (in.)87.0x91.0 (3.43x3.58)87.5x83.0 (3.44x3.27)u
eDisplacement cm3 (cu. in..)2164 (132.0)2995 (182.7)u
ngineCompression Ratio9.5 : 110.5:1uEngCarburetor TypeSFIuuResearch Octane No. RON9191 or higheruMax. Output (SAE±NET) kW/rpm (HP @ rpm)99/5200(133@5200)145/5200 (194@5200)uMax. Torque (SAE±NET) N.m/rpm (lb±ft @ rpm)199/4400(147@4400)283/4400 (209@4400)u
alBattery Capacity (5HR) Voltage & Amp. hr.12±52uu
ginectric a lGenerator Output Watts960uuEnginElectrStarter Output kW1.4uuClutch TypeÐÐÐTransmission TypeA140EA541EuIn First2.810uuIn Second1.549uu
Transmission Gear RatioIn Third1.000uuTransmission Gear RatioIn Fourth0.7060.375uIn FifthÐÐÐIn Reverse2.296uuCounter Gear Ratio0.945uuDifferential Gear Ratio (Final)3.9443.933u
ssisBrake TypeFrontVentilated Discuu
ChassiBrake TypeRearL.T. DrumSolid DiscuChParking Brake TypeDrumuuBrake Booster Type and Style in.Tandem 8º + 9ºuuProportioning Valve TypeDual±P Valveuu
Suspension TypeFrontMacPherson StrutuuSuspension TypeRearMacPherson Strutuu
Stabilizer BarFrontSTDuuStabilizer BarRearSTDuuSteering Gear TypeRack & PinionuuSteering Gear Ratio (Overall)17.4 : 1uuPower Steering TypeIntegral Typeuu
* : Unladen Vehicle

Component to be alignedSection of repair manual
for relevant model year
Front Wheels
Suspension and Axle (SA) section
Rear Wheels
Suspension and Axle (SA) section

Before repairing the body, remove the SRS parts if, during repair, shocks are likely to be applied to
the sensors due to vibrations of the body or direct tapping with tools or other parts.

Do not expose the SRS parts directly to hot air or flames
NOTICE:
1) The maximum ambient temperature tolerance is 120
°C (248°F) for the front airbag sensor,
105
°C (221°F) for the center airbag sensor assembly and 93°C (200°F) for the steering wheel
pad, and front passenger airbag assembly. If it is possible that the ambient temperature may
reach or exceed the temperature limit, remove the sensors and the steering wheel pad from the
vehicle or protect them with a hot insulation material before staring work.
2) Prior to welding, remove adjacent, SRS parts form tire vehicle or protect them with fire±proof
covers.

If the vehicle is damaged, visually inspect for damage to the steering wheel pad using the inspection
procedures described in section RS of the repair manual for the relevant model year.

When removing or handling the steering wheel pad, and front passenger airbag assembly keep the
pad upper surface facing upward. Also, lock the lock lever of the twin lock type connector at the rear
of the pad and take care not to damage the connector.
(Storing the pad or front passenger airbag assembly with its metallic surface up may lead to a seri-
ous accident if the airbag inflates for some reason.)

Store the steering wheel pad and the front passenger airbag assembly where the ambient tempera-
ture remains below 93°C (200°F), without high humidity and away from electrical noise.

Be careful not to let painting materials contact the SRS parts.

Information labels are attached to the periphery of the SRS components. Follow the NOTICES.

Store the airbag assembly where the ambient temperature remains below 93°C (200°F), without
high humidity and away from electrical noise.
2. BRAKE SYSTEM
The brake system is one of the most important safety components. Always follow the directions and
notes given in section BR of the repair manual for the relevant model year when handling brake sys-
tem parts.
NOTICE: When repairing the brake master cylinder or TRAC system, bleed the air out of the TRAC
system.
3. DRIVE TRAIN AND CHASSIS
The drive train and chassis are components that can have great effects on the running performance
and vibration resistance of the vehicle. After installing components in the sections listed in the table
below, perform alignments to ensure correct mounting angles and dimensions. Particularly accurate
repair of the body must also be done to ensure correct alignment.
HINT: Correct procedures and special tools are required for alignment. Always follow the directions
given in the repair manual for the relevant model year during alignment and section DI of this manual.
INTRODUCTIONIN-7

GENERAL INFORMATION
1. BASIC DIMENSIONS
(a) There are two types of dimensions in the diagram.
(Three±dimensional distance)

Straight±line distance between the centers of two
measuring points.
(Two±dimensional distance)

Horizontal distance in forward/rearward between
the centers of two measuring points.

The height from an imaginary standard line.
(b) In cases in which only one dimension is given, left
and right are symmetrical.
(c) The dimensions in the following drawing indicate
actual distance. Therefore, please use the dimen-
sions as a reference.
2. MEASURING
(a) Basically, all measurements are to be done with a
tracking gauge. For portions where it is not possible
to use a tracking gauge, a tape measure should be
used.
(b) Use only a tracking gauge that has no looseness in
the body, measuring plate, or pointers.
HINT:
1. The height of the left and right pointers must be equal.
2. Always calibrate the tracking gauge before measuring or
after adjusting the pointer height.
3. Take care not to drop the tracking gauge or otherwise
shock it.
4. Confirm that the pointers are securely in the holes.
(c) When using a tape measure, avoid twists and
bends in the tape.
(d) When tracking a diagonal measurement from the
front spring support inner hole to the suspension
member upper rear installation hole, measure
along the front spring support panel surface.
Center±to±center
straight±line
distance Three±dimensional
distance
Front Spring Support Inner Hole
Tape Measure
Along Body
Surface
Front Suspension Member Rear Side
Upper Installation HoleMaster Gauge PointerPointer LoosenessBody LoosenessPlate Looseness Two±dimensional
distanceCenter±to±center
Horizontal distance in
forward/rearward
Vertical distance
in lower surface Vertical distance
in center
Imaginary Standard Line
WrongCorrect
Pointer
BODY DIMENSIONSDI-2

(Three±Dimensional Distance)
mm (in.)
Hole dia.
15 (0.59)
12 (0.47)
18 (0.71)
12 (0.47) nut
18 (0.71)
18 (0.71) Name
Front floor under reinforcement standard hole
Strut bar installation hole ± inner
Rear floor side member standard hole
Rear suspension member installation nut
Rear floor side member standard hole
Rear floor side member standard hole Symbol
G, g
H, h
I, i
J
K, k
L, l Hole dia.
15 (0.59)
14 (0.55) nut
18 (0.71)
14 (0.55) nut
18 (0.71)
15 (0.59) Name
Front crossmember standard hole
Front frame installation nut
Front side member standard hole
Front frame installation nut
Front side member standard hole
Front side member working hole Symbol
A, a
B, b
C, c
D, d
E, e
F, f
UNDER BODY
BODY DIMENSIONSDI-7

Wheel base
2,670 (105.12)
Imaginary
Standard
Line
(Two±Dimensional Distance)
mm (in.)
Hole dia.
15 (0.59)
12 (0.47)
18 (0.71)
12 (0.47) nut
9.5 (0.374)
18 (0.71)
18 (0.71) Name
Front floor under reinforcement standard hole
Strut bar installation hole±inner
Rear floor side member standard hole
Rear suspension member installation nut
Rear spring support hole±outer
Rear floor side member standard hole
Rear floor side member standard hole Symbol
H, h
I, i
J, j
K, k
L, l
M, m
N, n Hole dia.
15 (0.59)
14 (0.55) nut
18 (0.71)
11 (0.43)
14 (0.55) nut
18 (0.71)
15 (0.59) Name
Front crossmember standard hole
Front frame installation nut
Front side member standard hole
Front spring support hole outer ± front
Front frame installation nut
Front side member standard hole
Front side member working hole Symbol
A, a
B, b
C, c
D, d
E, e
F, f
G, g
UNDER BODY (Cont'd)
BODY DIMENSIONSDI-8

APPENDIX ± CAMRY
ItemArea
Body Type
Vehicle Grade
Model Code
OverallLength mm (in.)
Width mm (in.)
Height* mm (in.)
Wheel Base mm (in.)
TreadFront mm (in.)
Rear mm (in.)
Effective Head RoomFront mm (in.)
Rear mm (in.)
Front mm (in.)
Rear mm (in.)
Front mm (in.)
Rear mm (in.)
Front mm (in.)
Rear mm (in.) Effective Leg Room
Shoulder Room
Overhang
Min. Running Ground Clearance mm (in.)
Angle of Approach degrees
Angle of Departure degrees
Curb Weight
Gross Vehicle WeightFront kg (lb)
Rear kg (lb)
Total kg (lb)
Front kg (lb)
Rear kg (lb)
Total kg (lb)
Fuel Tank Capacity (US.gal., Imp.gal)
Luggage Compartment Capacity m
3 (cu.ft.)
Max. Speed km / h (mph)
Max. Cruising Speed km / h (mph)
Acceleration
Max. Permissible
Speed
Turning Diameter
(Outside Front)0 to 100 km / h sec.
0 to 400 m sec.
1st Gear km / h (mph)
2nd Gear km / h (mph)
3rd Gear km / h (mph)
4th Gear km / h (mph)
Wall to Wall m (ft.)
Curb to Curb m (ft.)
Engine Type
Valve Mechanism
Bore x Stroke mm (in.)
Displacement cm
3 (cu.in.)
Compression Ratio
Carburetor Type
Research Octane No. RON
Max. Output (SAE-NET) kW / rpm (HP@rpm)
Max. Torque (SAE-NET) N
.m / rpm (lb-ft@rpm)
Battery Capacity (5HR) Voltage & Amp. hr.
Generator Output Watts
Starter Output kW
Clutch Type
Transaxle Type
Transmission Gear
Ratio
Counter Gear Ratio
Differential Gear Ratio (Final)
Brake Type
Parking Brake Type
Brake Booster Type and Size in.
Proportioning Valve Type
Suspension Type
Stabilizer Bar
Steering Gear Type
Steering Gear Ratio (Overall)
Power Steering TypeIn First
In Second
In Third
In Fourth
In Fifth
In Reverse
Front
Rear
Front
Rear
Front
Rear
5
10
15
20
25
30
35
40
45
50
55
60
65
70
Major Dimensions & Vehicle Weights Performance Engine Engine
Chassis
Electrical
U.S.A.
CE
LE 4-Door Sedan
XLE
148

CAMRY
SXV20L-CEMDKA SXV20L-CEPDKA SXV20L-A(C)EPNKA SXV20L-A(C)EPGKA
4785 (188.4)



1780 (70.1)



1415 (55.7)



2670 (105.1)



1545 (60.8)



1520 (59.8)



980 (38.6), 950 (37.4)*
1



940 (37.0), 914 (36.0)*1



1102 (43.4)



901 (35.5)



1427 (56.2)



1425 (56.1)



970 (38.2)



1140 (44.9)



130 (5.1)



16



16



810 (1786) 835 (1841) 865 (1907)*
2, 870 (1918)*3

550 (1213) 545 (1202) 535 (1179)*2, 545 (1202)*3540 (1191)*2, 550 (1213)*3
1360 (2999) 1380 (3043) 1400 (3086)*2, 1415 (3120)*31405 (3098)*2, 1420 (3131)*3
995 (2195)



900 (1985)



1895 (4180)



70 (18.5, 15.4)



0.399 (14.1)



180 (112)



ÐÐÐÐ
ÐÐÐÐ
ÐÐÐÐ
52 (32) 69 (43)


93 (58) 125 (78)


147 (91) Ð Ð Ð
ÐÐÐÐ
115 (37.7)



11.0 (36.1)



5S-FE



16-Valve, DOHC



87.0 x 91.0 (3.43 x 3.58)



2164 (132.0)



9.5 : 1



SFI



91



99 / 5200(133@5200),97 / 5200(130@5200)*4


199 / 4400(147@4400),197 / 4400(145@4400)*4



12 ± 55, 12 ± 48*5



960



1.4



Dry, Single Plate Ð Ð Ð
S51 A140E


3.538 2.810


1.960 1.549


1.250 1.000


0.945 0.706


0.731 Ð Ð Ð
3.153 2.296


Ð 0.945


3.944



Ventilated Disc



L.T. Drum



Drum



Tandem 8º + 9º
Tandem 8.5º + 8.5º*
2, 8º + 9º*3

Dual-P Valve



MacPherson Strut



MacPherson Strut



STD



STD



Rack and Pinion



17.4 : 1



Integral Type



*: Unladed Vehicle *
3: Produced by TMMK
*1: With Moor Roof *4: California Specification Model
*2: Produced by TMC *5: Without Cold Area Specification Model