DIAGNOSTIC PROCEDURE 8 (Continued from
DIAGNOSTIC PROCEDURE 3) (
without
CONSULT-II)
Inspecting SRS malfunctioning record
Is it the first time for maintenance of
SRS?
Yes
cNo
Diagnosis results (previ-
ously stored in the
memory) might not be
erased after repair.
Go to DIAGNOSTIC PRO-
CEDURE 7, step 5 (RS-
1048).
GO TO DIAGNOSTIC PROCEDURE 5
(RS-1040).Further inspection cannot be
performed without CONSULT-II.
Trouble Diagnoses for Air Bag Warning
Lamp
DIAGNOSTIC PROCEDURE 9
SYMPTOM:ªAIR BAGº warning lamp does not turn off.
Is air bag module deployed?
No
cYes
Replace air bag module
and diagnosis sensor unit.
Refer to COLLISION
DIAGNOSIS, (RS-1052).
Is SRS ªAIR BAGº fuse OK?
Yes
cNo
Replace fuse and turn igni-
tion switch ON. If SRS ªAIR
BAGº fuse is blown again,
repair related harness.
Connect CONSULT-II and touch
ªSTARTº.
+Is ªAIRBAGº displayed on
CONSULT-II?
Yes
cNo
Replace diagnosis sensor
unit.
Is harness connection between warning
lamp and diagnosis sensor unit OK?
Yes
cNo
Connect warning lamp and
diagnosis sensor unit con-
nector properly. If warning
lamp still does not go off,
replace harness.
Replace diagnosis sensor unit.
SRS307
SRS771
.
.
.
.
.
TROUBLE DIAGNOSES Ð Supplemental Restraint System (SRS)
Self-diagnosis (Cont'd)
RS-1050
