± SERVICE SPECIFICATIONSBODY ELECTRICAL
SS±61
217 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)Standard indication (mph)
Allowable range (mph)
2018 ± 24
4038 ± 44
6056 ± 66
8078 ± 88
10098 ± 110
120118 ± 132
CANADA:
Standard indication (km/h)Allowable range (km/h)
2017 ± 24
4038 ± 46
6057.5 ± 67
8077 ± 88
10096 ± 109
120115 ± 130
160134 ± 151.5
SpeedometerResistance (W)
A ± B140 ± 185 W
C ± D130 ± 175 W
TACHOMETER (ON±VEHICLE)/ DC 13.5 V 25 °C at (77 °F)
Standard indicationAllowable range
700630 ± 770
1,000900 ± 1,100
2,0001,850 ± 2,150
3,0002,800 ± 3,200
4,0003,800 ± 4,200
5,0004,800 ± 5,200
6,0005,750 ± 6,250
7,0006,700 ± 7,300
TachometerResistance (W)
A ± B140 ± 185 W
C ± D130 ± 175 W
FUEL RECEIVER GAUGEResistance (W)
A ± B140 ± 185 W
C ± D130 ± 175 W
FUEL MAIN SENDER GAUGE
Float position mm (in.)Resistance (W)
F: Approx. 34.6 (1.36) ± 3 (0.12)Approx. 2.0 ± 1.0
1/2: Approx. 52.4 (2.06) ± 3 (0.12)Approx. 26.1 ± 3.0
E: Approx. 134.9 (5.31) ± 3 (0.12)Approx. 48..7 ± 1.0
FUEL SUB SENDER GAUGE
Float position mm (in.)Resistance (W)
F: Approx. 9.5 (0.37) ± 3 (0.12)Approx. 2.0 ± 1.0
1/2: Approx. 110.5 (4.35) ± 3 (0.12)Approx. 33.0 ± 3.0
E: Approx. 206.5 (8.13) ± 3 (0.12)Approx. 61.3 ± 1.0
ENGINE COOLANT TEMPERATURE RECEIVER GAUGE (Resistance)Resistance (W)
SS±62
± SERVICE SPECIFICATIONSBODY ELECTRICAL
218 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)A ± B
140 ± 185 W
C ± D130 ± 175 W
ENGINE COOLANT TEMPERATURE SENDER GAUGE (Resistance)
Temperature °C (°F)Resistance (W)
50 (122.0)160 ± 240
120 (248.0)17.1 ± 21.2
DEFOGGER SWITCH (wire harness side)
A2 ± Ground (Ignition switch position LOCK or ACC)No voltage
A2 ± Ground (Ignition switch position ON)Battery positive voltage
WIRELESS DOOR LOCK CONTROL RECEIVER
(Connector disconnected)
7 ± Ground (Constant)Battery positive voltage
(Connector connected)
3 ± Ground (Ignition switch position OFF, Key removed,
Transmitter OFF " ON)4.5 ± 5.5 V " below 1 V
3 ± Ground (Ignition switch position OFF, Key removed,
Transmitter OFF " ON)4.5 ± 5.5 V " below 1 V
4 ± Ground (Ignition switch position OFF, Key removed,
Transmitter OFF)10 ± 14 V
CD AUTO CHANGER
(Except Nakamichi made)
5 ± Ground (Constant)Battery positive voltage
12 ± Ground (Ignition switch position LOCK)No voltage
12 ± Ground (Ignition switch position ACC or ON)Battery positive voltage
POWER AMPLIFIER
(Except Nakamichi made)
B4 ± Ground (Constant)Battery positive voltage
C12 ± Ground (Ignition switch position LOCK)No voltage
C12 ± Ground (Ignition switch position ACC or ON)Battery positive voltage
RADIO RECEIVER
(Except Nakamichi made)
A4 ± Ground (Constant)Battery positive voltage
A1 ± Ground (Ignition switch position ACC or ON)Battery positive voltage
A1 ± Ground (Ignition switch position LOCK)No voltage
CD AUTO CHANGER
(Nakamichi made)
5 ± Ground (Constant)Battery positive voltage
4 ± Ground (Ignition switch position LOCK)No voltage
4 ± Ground (Ignition switch position ACC or ON)Battery positive voltage
POWER AMPLIFIER
(Nakamichi made)
A2 ± Ground (Constant)Battery positive voltage
A5 ± Ground (Constant)Battery positive voltage
A6 ± Ground (Ignition switch position OFF)Battery positive voltage
A6 ± Ground (Ignition switch position ACC or ON)Battery positive voltage
RADIO RECEIVER
SF0O6±01
B01944
SST
Z02917
Ohmmeter
Acceptable
RESISTANCE KW
TEMPERATURE °C (°F)
± SFI (2JZ±GE)ENGINE COOLANT TEMPERATURE (ECT) SENSOR
SF±59
1525 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
INSPECTION
1. DRAIN ENGINE COOLANT
2. REMOVE ECT SENSOR
(a) Disconnect the ECT sensor connector.
(b) Using SST, remove the ECT sensor and gasket.
SST 09205±76030
3. INSPECT ECT SENSOR
Using an ohmmeter, measure the resistance between the ter-
minals.
Resistance: Refer to the graph
If the resistance is not as specified, replace the ECT sensor.
4. REINSTALL ECT SENSOR
(a) Install a new gasket to the ECT sensor.
(b) Using SST, install the ECT sensor.
SST 09205±76030
Torque: 19.6 N´m (200 kgf´cm, 14 ft´lbf)
(c) Connect the ECT sensor connector.
5. REFILL WITH ENGINE COOLANT
