2000 LEXUS GS400 door lock
[x] Cancel search: door lockPage 145 of 1111
BE02C±02
± BODY ELECTRICALPOWER WINDOW CONTROL SYSTEM
BE±111
2412 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
POWER WINDOW CONTROL SYSTEM
TROUBLESHOOTING
1. WINDOW DOES NOT OPERATE WITH POWER WINDOW MASTER SWITCH. (MANUAL OR AU-
TOMATIC OPERATION CAN NOT BE PERFORMED.)
TroubleSuspect Area (terminal No.)Parts name
All windows do not operate with master
switch of each window.
PWS terminal of body ECU does not output sig-
nal.
Body ECU PWS terminal (B8) output
Master Switch PW terminal (15) output
Check wire harness between PWS terminal
and PW terminal (15)
Body ECU
Master switch
Windows except driver's do not operate
with master switch of each window.
Master switch (window lock circuit) faulty
Check continuity between master switch PW
terminal (15) and W/L2 terminal (10)
Check wire harness between W/L2 terminal of
master switch (10) and PCT terminals of each
power window switch.
Master switch
Only specific window does not operate.
(Manual and automatic operation can not
be performed.)
FLOW CHART ±
Only specific window does not operate.
(Automatic operation can not be per-
formed.)When ºJam Protectionº sensor is defective, auto-
matic function as a fail±safe function might be
unable. Master switch
Power window switch
Door control ECU
Page 146 of 1111
Only specific window does not operate. (Neither manual nor automatic operation is available.)1
Diagnosis check:
Check output diagnosis trouble codes 21 ± 26 when operating the
master switch and power window switch.
(Refer to ºMultiplex Communication Systemº)If the door lock of the applicable seat operates.
Wire harness faulty or
D FR DOOR fuse faulty.
No Yes
Disconnect the driver door control ECU connector.
Ye sNo
Voltage check:
With ignition switch ON if 10 to 14 V power is
supplied to PCT (3) of power window switch.Wire harness faulty.
(Between master switch W/L2 terminal
(10) and power window switch PCT
terminal (3)
Continuity check:
Master switch faulty.
Check continuity master switch and power window switch.No (Driver side)
No (Except driver side)Ye s
No Ye s
Wire harness check:
Master switch
Master switch Driver door control ECU
AUTO (7)
DDN (18)
DUP (6)AUTO (B6)
MDN (B4)
MUP (B5)
Power window switch
Power window switch Driver door control ECU
A (5)
D (4)
U (6)AUTO (A22)
MDN (A23)
MUP (A24)
Wire harness faulty.
Continuity check:
Check continuity between UP terminal (A2) and
GND terminal (C12), DN terminal (A11) and
GND terminal (C12) of driver door control ECU .
Ye s
When replacing with the normal driver door control ECU
removed from another seat, if it operates normally.
Driver door control ECU faulty.No Yes
Driver door control ECU faulty.
No
Power window motor check:
Disconnect the motor connector.
Connect the battery positive (+) lead to terminal
UP (2) and negative (±) lead to terminal DN
(1) of wire harness side motor connector, check that
the motor operates.
Check power window motor.Ye s
No
Wire harness faulty.
Ye s
Power window motor faulty.
No
BE±112
± BODY ELECTRICALPOWER WINDOW CONTROL SYSTEM
2413 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
FLOW CHART
Page 148 of 1111
BE±114
± BODY ELECTRICALPOWER WINDOW CONTROL SYSTEM
2415 Author: Date:
2000 LEXUS GS300/GS400 (RM718U) Only AUTO DOWN operation does not
operate.
(All window (Except driver side) doors.)
Master switch ON SC3 terminal does not output.
Driver door control ECU SC3 terminal does not
input.
Master switch SC3 terminal (13)
Driver door control ECU SC3 terminal (B11)
Check wire harness between terminal SC3 (13)
and SC3 (B11)
Driver door control ECU
Master switch
Only AUTO DOWN operation does not
operate.
(Only specific window does not operate.)Master switch faulty
Check continuity of master switch.
3. THE KEY RELATED POWER WINDOW OPERATION DOES NOT OPERATE WITH DRIVER SIDE
DOOR KEY CYLINDER. (MASTER SWITCH OPERATION IS NORMAL.)
TroubleSuspect Area (terminal No.)Parts name
Door lock system does not operate with
door key.Refer to ºPOWER DOOR LOCK CONTROL
SYSTEMº.±
Door lock system does not operate with
door key.
Fail±safe mode caused by error on jam protec-
tion sensor of power window.
(Operation of power window with multi±function
transmitter is prohibited.)
HINT: DTC 31 ± 38 output
Refer to ºMultiplex Communication Systemº.
4. POWER WINDOW DOES NOT OPERATE WITH MULTI±FUNCTION TRANSMITTER. (WINDOWS
OPERATE NORMALLY WITH MASTER SWITCH.)
TroubleSuspect Area (terminal No.)Parts name
Door lock and luggage compartment
opener do not operate with multi±function
transmitter.Refer to ºWIRELESS DOOR LOCK CONTROL
SYSTEMº.±
Only luggage compartment opener oper-
ates with multi±function transmitter.Wireless door lock transmitter faulty.Check wireless door lock transmitter.
Door lock and luggage compartment
opener operate with multi±function trans-
mitter.
Fail±safe mode caused by error on jam protec-
tion sensor of power window.
(Operation of power window with multi±function
transmitter is prohibited.)
HINT: DTC 31 ± 38 output
Refer to ºMultiplex Communication Systemº.
5. WINDOW MOVES DOWN WITHOUT BEING ORDERED DURING THE UP OPERATION
TroubleSuspect Area (terminal No.)Parts name
After the window is fully closed, it starts to
move down.
Power window motor limit switch wire harness
faulty.
Power window motor reset switch is reset.
Driver door control ECU LMT terminal (B12)
Driver door control ECU
The window moves down during the up
operation.FLOW CHART ±
Page 154 of 1111
I04123
I04119
2
3
I01200
2 1
35
2 5
1 3
I05474
1
2
BE±120
± BODY ELECTRICALPOWER WINDOW CONTROL SYSTEM
2421 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
6. INSPECT POWER WINDOW SWITCH CONTINUITY
Switch positionTester connectionSpecified condition
AUTO3 ± 5Continuity
UP3 ± 6Continuity
OFF±No continuity
DOWN3 ± 4Continuity
If continuity is not as specified, replace the switch.
7. INSPECT POWER WINDOW SWITCH CIRCUIT
Passenger side: (See page DI±908)
Rear LH side: (See page DI±936)
Rear RH side: (See page DI±953)
8. INSPECT POWER WINDOW SWITCH ILLUMINATION
Connect the positive (+) lead from the battery to terminal 3 and
the negative (±) lead to terminal 2, and check that the indicator
light lights up.
If operation is not as specified, replace the switch.
9. INSPECT POWER MAIN RELAY CONTINUITY
ConditionTester connectionSpecified condition
Constant1 ± 2Continuity
Apply B+ between
terminals 1 and 2.3 ± 5Continuity
If continuity is not as specified, replace the relay.
10. INSPECT POWER MAIN RELAY CIRCUIT
(See page BE±21)
11. Driver 's door:
INSPECT POWER WINDOW MOTOR OPERATION
(a) Connect the positive (+) lead from the battery to terminal
1 and the negative (±) lead to terminal 2, and check that
the motor turns clockwise.
Page 155 of 1111
I054751
2
I05476
1
2
I054771
2
I04124
13
I04125
13
± BODY ELECTRICALPOWER WINDOW CONTROL SYSTEM
BE±121
2422 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
(b) Reverse the polarity, check that the motor turns counter-
clockwise.
If operation is not as specified, replace the motor.
12. Driver 's door:
INSPECT POWER WINDOW MOTOR CIRCUIT
(See page DI±876)
13. Front passenger's door:
INSPECT POWER WINDOW MOTOR OPERATION
(a) Connect the positive (+) lead from the battery to terminal
1 and the negative (±) lead to terminal 2, and check that
the motor turns clockwise.
(b) Reverse the polarity, check that the motor turns counter-
clockwise.
If operation is not as specified, replace the motor.
14. Front passenger's door:
INSPECT POWER WINDOW MOTOR CIRCUIT
(See page DI±910)
15. Rear left side door:
INSPECT POWER WINDOW MOTOR OPERATION
(a) Connect the positive (+) lead from the battery to terminal
3 and the negative (±) lead to terminal 1, and check that
the motor turns clockwise.
(b) Reverse the polarity, check that the motor turns counter-
clockwise.
If operation is not as specified, replace the motor.
Page 156 of 1111
I04126
13
I04127
13
I04128
within
4 to 40 seconds
21
I04129
2 within
60 seconds
1
I04130
within
4 to 40 seconds
3 1
BE±122
± BODY ELECTRICALPOWER WINDOW CONTROL SYSTEM
2423 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
16. Rear right side door:
INSPECT POWER WINDOW MOTOR OPERATION
(a) Connect the positive (+) lead from the battery to terminal
1 and the negative (±) lead to terminal 3, and check that
the motor turns clockwise.
(b) Reverse the polarity, check that the motor turns counter-
clockwise.
If operation is not as specified, replace the motor.
17. Front door:
INSPECT POWER WINDOW MOTOR PTC OPERA-
TION
(a) Disconnect the connector from the master switch.
(b) Connect the positive (+) lead from the battery to terminal
2 and the negative (±) lead to terminal 1 on the wire har-
ness side connector and raise the window to full closed
position.
(c) Continue to apply voltage, check that there is a PTC op-
eration noise within approximately 4 to 90 seconds.
(d) Reverse the polarity, check that the window begins to de-
scend within approximately 60 seconds.
If operation is not as specified, replace the motor.
18. Rear door:
INSPECT POWER WINDOW MOTOR PTC OPERA-
TION
(a) Disconnect the connector from the rear door ECU.
(b) Connect the positive (+) lead from the battery to terminal
3 and the negative (±) lead to terminal 1 on the wire har-
ness side connector, and raise the window to full closed
position.
(c) Continue to apply voltage, check that there is a PTC op-
eration noise within approximately 4 to 90 seconds.
Page 164 of 1111
BE0HQ±11
I01364
Power Window Master Switch
Door Lock Manual SwitchIgnition Switch
Door Lock Assembly
Door Lock Motor
Door Unlock Detection
Switch
Door Key Lock and
Unlock Switch
Door Lock Assembly
Door Lock Motor
Door Unlock Detection Switch
Door Key Lock and Unlock Switch
Passenger Door Lock
Control Switch
BE±130
± BODY ELECTRICALPOWER DOOR LOCK CONTROL SYSTEM
2431 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
POWER DOOR LOCK CONTROL SYSTEM
LOCATION
Page 165 of 1111
BE0HR±04
I04116
I04132
I04133
42
± BODY ELECTRICALPOWER DOOR LOCK CONTROL SYSTEM
BE±131
2432 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
INSPECTION
1. Master switch:
INSPECT DRIVER'S DOOR LOCK CONTROL SWITCH
CONTINUITY
Switch positionTester connectionSpecified condition
LOCK5 ± 16Continuity
OFF±No continuity
UNLOCK16 ± 17Continuity
If continuity is not as specified, replace the switch.
2. Master switch:
INSPECT DRIVER'S DOOR LOCK CONTROL SWITCH
CIRCUIT
(See page DI±866)
3. INSPECT PASSENGER'S DOOR LOCK CONTROL
SWITCH CONTINUITY
Switch positionTester connectionSpecified condition
LOCK2 ± 3Continuity
OFF±No continuity
UNLOCK1 ± 2Continuity
If continuity is not as specified, replace the switch.
4. INSPECT PASSENGER'S DOOR LOCK CONTROL
SWITCH CIRCUIT
(See page DI±898)
5. INSPECT PASSENGER'S DOOR LOCK CONTROL
SWITCH ILLUMINATION
Connect the positive (+) lead from the battery to terminal 4 and
the negative (±) lead to terminal 2, and check that the indicator
light lights up.
If operation is not as specified, replace the switch.