2000 FORD EXPEDITION Rear Seat Entertainment System Manual

VCP PROTECTION CIRCUITS
Dew sensor circuit
²Under high moisture (dewed) conditions, the VCP will not operate.
²When the vehicle's cabin temperature is very low and then is heated
quickly, or the humidity is very high within the vehicle, the inside of
the windows most likely will be fogged. Under these conditions, the
inside of the VCP most likely is dewed.
²When a dewed condition exists, the dew sensor circuit stops machine
operation and the DEW indicator lamp on the VCP flashes. The lamp
will remain flashing until the system is dry enough to operate safely.
Description
7

VIDEO CASSETTE PLAYER (VCP) CONTROLS
1.POWERbutton
Press to turn the VCP ON or OFF.
2.REMOTE CONTROL(Remote Sensor)
To operate the VCP with the remote control unit, aim the remote control
toward the pod control panel or the VCP.
3.INDICATOR LAMPS
Each lamp is ON when its related function is operating.
CST INThe cassette is in the player.
DEW(Red) Flashes when dew is present in the VCP
AUTO REPEATThe LED is on when the auto repeat function is
engaged.
4.PLAYbutton (Auto repeat)
Press to playback a videocassette tape.
If the auto repeat feature is included, press and hold for two seconds to
engage the auto repeat function. When the tape reaches the end, it will
rewind and play again. Other buttons will not operate in Auto Repeat
mode. To release the Auto Repeat mode, press the play button for two
seconds again.
REMOTE
SENSOR
CST INDEW
AUTO
REPEATPOWER
REW
FFPLAY STOP/
EJECT
23156473
Description
8

5.STOP/EJECTbutton
Press to stop playback operation.
Press twice to eject the videocassette tape from the VCP.
6.REW(Rewind) button
Press to rewind the tape.
7.FF(Fast Forward) button
Press to fast-forward the tape.
Description
9

VIDEO DISPLAY UNIT
The roof-mounted Video Display Unit is the most visible component of
your RSES. In essence, it is the ªnerve centerº of your system. In
addition to containing the flip-down LCD video screen, it contains many
of the system's main control buttons, important indicator lights, and
facilities to support both the wireless and optional wired headphones.
1.POWERbutton
Press this button to turn the RSES system On and Off alternately.
2.REMOTE CONTROL SENSOR
To operate the VCP with the remote control, aim it toward this location.
3.VOLUMEbuttons
Press (+) or (þ) button to decrease or increase audio volume through
thewiredheadphones.
Wired headphones are not supplied. Any headphones for portable
cassette and compact disc units can be used.
4.SELECTbutton
Press to select between AV1 and AV2.
POWER
BRIGHTNESS VOLUMESENSORSELECT
FREQUENCY
OFF 1 2AV 1 AV 2
54321
876
Description
10

5.INDICATOR LAMPS
AV 1(VCP) illuminates when select button selects video play.
AV 2(Auxiliary) illuminates when select button selects auxiliary (game)
mode.
6.BRIGHTNESSbuttons
The up arrow increases screen brightness.
The down arrow decreases screen brightness.
7.SCREEN RELEASE
Slide in the direction of arrow to release the flip-down LCD screen.
8.FREQUENCY OFF/1/2Switch
To access this switch, release the flip-down LCD screen.
Slide to activate/deactivate audio over vehicle speakers. Slide to 1, and
set the radio to 88.7 MHz. Slide to 2 and set the radio to 89.1 MHZ.
9.INFRARED EMITTER ARRAY
for wireless headphones.
The audio signal which operates the
wireless headphones is sent from
this black lens area. If you block or
cover this lens, the wireless infrared
headphones will not operate.
10.HEADPHONEterminals
Standard 1/8º stereo headphone
jacks. You can connect wired stereo
headphones to these two headphone
jacks.
11.AUXinput jacks
You can connect a camcorder or
video game to these jacks.
YELLOW: Video
WHITE: Left Audio
RED: Right Audio
11
9
1010
Description
11

REMOTE CONTROL
1.REW(Rewind) button
Press to rewind videotape.
2.PLAYbutton
Press to playback a tape.
3.FWD(Fast-Forward) button
Press to fast-forward tape.
4.STOPbutton
Press to stop tape playback.
5.REPLAYbutton
Press to rewind tape and play again.
6.POWERButton
Press to turn the pod on or off.
7.VIDEO or GAME
Press to choose between playing the
videocassette player or playing a
game.
8.WIRED HEADPHONE VOLUME CONTROL
Press + (plus) to increase the volume and press - (minus) to decrease
the volume. This does not affect the wireless headphones.
POWER
REW
FWD
PLAYSTOP
WIRED HEADPHONE
VOLUME CONTROL
REPLAY VIDEO
or GAME
+
–
56
1
2
8
7
3
4
Description
12

BATTERY REPLACEMENT
Slide battery cover off as shown on
remote control to access the
batteries.
The remote control unit uses two
AAA batteries.
The need for battery replacement is
usually indicated if the remote
control only functions at extremely
close distances to the entertainment
center or not at all.
When replacing batteries, use two
new batteries (alkaline
recommended) and install with
correct orientation (+ and þ
polarities).
Description
13

FLIP-DOWN SCREEN
The screen rotates down to view
and up into housing to store when
not in use. Be sure the screen is
latched into the housing when being
stored. For the best viewing angle,
move the screen all the way back
and adjust the brightness.
1. 6.8º (diagonal) color liquid crystal
display (LCD) screen.
2. Screen housing.
2
1
Description
14