To Operate
How to Play a Video Cassette Tape
Your system audio defaults to wireless
headphones. To play the system audio over
your vehicle's speakers:
1. Slide the frequency switch from the OFF
position to position 1 (88.7 MHz) or
position 2 (89.1 MHz).
2. Turn the audio system ON and tune the
radio to 88.7 or 89.1 depending on where
you set the frequency switch in step 1.
3. Press the POWER control on the video
display unit.
4. Insert a VHS videocassette into the VCP,
and the video should start playing.
Do not force the tape into the VCP while the ignition is OFF.
To Play a Video Game
How to Use Auxiliary Inputs
Your system is capable of accepting other
auxiliary inputs such as video games or
camcorders. These may require a
12-volt DC to 120-volt AC power inverter.
²Remove the black plastic cover at the
back of the overhead video display unit.
²Connect the video line from your video
game device to the YELLOW jack on the
overhead video display unit.
²Connect the left and right audio cables
to the WHITE and RED jacks
respectively on the overhead video
display unit.
²Press the select switch on the video
display unit. The AV2 indicator will
illuminate.
²Turn on the game.
After Using your Rear Seat Entertainment system:
²To resume normal AM/FM radio operation, slide the frequency switch to the
off position. Rotate the flip-down screen up into the housing for storage when
not in use.
How To Get Going
REMOTE
SENSOR
CST INDEW
POWER
BRIGHTNESS VOLUMESENSORSELECT
FREQUENCY
OFF 1 2AV 1 AV 2
Fast-forward or rewind (no picture)
1. With the tape stopped, press the FF or REW button.
2. Fast-forwarding or rewinding stops when the tape reaches its end or
beginning, or when the play button or stop button is pressed.
Fast-forward or rewind (with picture)
1. While the tape is playing, momentarily press the FF button or REW
button.
2. The VCP starts search playback in the normal (FF button) or reverse
(REW button) direction at a speed seven times as fast as normal.
3. To play the tape normally, press the PLAY button.
Auto tracking playback
If video ªnoiseº (picture fluctuates up and down) occurs, press the PLAY
button on the remote control to switch automatic tracking on.
Tracking adjustment occasionally may be difficult with poorly recorded
videotapes.
Repeated playback
1. Press the REPLAY on the remote.
2. The tape will rewind and be played from beginning to end.
Operating Instructions
19
