F08080
Front:
Rear:SA1DP±03
Z03382
± SUSPENSION AND AXLEFRONT WHEEL ALIGNMENT
SA±1
508 Author: Date:
FRONT WHEEL ALIGNMENT
INSPECTION
1. MEASURE VEHICLE HEIGHT
Vehicle height:
Tire sizeFront*1 mm (in.)Rear*2 mm (in.)
205/65R15218 (8.58)270 (10.63)
*1: Front measuring point
Measure the distance from the ground to the center of the front
side lower suspension arm mounting bolt.
*
2: Rear measuring point
Measure the distance from the ground to the center of the front
side strut rod mounting bolt.
NOTICE:
Before inspecting the wheel alignment, adjust the vehicle
height to the specified value.
If the vehicle height is not the specified value, try to adjust it by
pushing down on or lifting the body.
2. INSTALL CAMBER±CASTER±KINGPIN GAUGE OR
POSITION VEHICLE ON WHEEL ALIGNMENT TES-
TER
Follow the specific instructions of the equipment manufacturer.
3. INSPECT CAMBER, CASTER AND STEERING AXIS
INCLINATION
Camber, caster and steering axis inclination:
Camber
Right±left error±0°36' ± 45' (±0.6° ± 0.75°)
45' (0.75°) or less
Caster
Right±left error2°10' ± 45' (2.17° ± 0.75°)
45' (0.75°) or less
Steering axis inclination
Right±left error13°01' ± 45' (13.02° ± 0.75°)
45' (0.75°) or less
If the caster and steering axis inclination are not within the spe-
cified values, after the camber has been correctly adjusted, re-
check the suspension parts for damaged and/or worn out parts.
4. ADJUST CAMBER
NOTICE:
After the camber has been adjusted, inspect the toe±in.
(a) Remove the front wheel and ABS speed sensor clamp.
Toyota Supports ASE CertificationPage 1 of 2
SS002±99Title:
1999 SPECIAL SERVICE TOOLS
Models:
All '98 & '99 Models
Technical Service
BULLETIN
July 9, 1999
This TSB contains information regarding Special Service Tools (SSTs) distributed or
added to the SST program during 1999 model year. Both the Essential and Available
SSTs are listed by tool number, tool name, and model application.
Special Service Tools can be ordered through the Toyota SST Program by calling
1±800±933±8335.
All 1998 and 1999 MY Toyota Vehicles.
1999 ESSENTIAL SPECIAL SERVICE TOOLS
TOOL NUMBERTOOL NAMEAPPLICATION
09521±25021±1Rear Axle Shaft Puller AttachmentLand Cruiser
09631±12090Seal Ring ToolLand Cruiser
09710±28012±01Front Suspension Bushing Tool SetLand Cruiser
02002±02XXXHaweka Flange Plate
Note: XXX is Spindle Shaft Size
Land Cruiser
09950±60030±01Replacer Set #3Land Cruiser
09999±00310Toyota Spare Tire Lock KitLand Cruiser,
T100, Tacoma
09999±00305
Part of Kit #
09999±00310Spare Tire Lock Adapter
(Toyota/Lexus Dual Dealers)T100
09268±21010±01Fuel Hose PullerCorolla ('99)
SPECIAL SERVICE TOOLS
Introduction
Applicable
Vehicles
1999 Essential
Special Service
Tools
