1999 NISSAN PICK-UP tire size

VA
Note
CHECK TIRE.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Check for inflation pressure, wear and
size of each tire.
OK
cNGNote
Adjust tire pressure or
replace tire(s).
Note
CHECK WHEEL BEARING.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Check wheel bearing axial end play.
OK
Note
CHECK SENSOR ROTOR.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Check sensor rotor for teeth damage.
OK
cNGNote
Replace sensor rotor.
CHECK HARNESS CONNECTOR.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Check ABS actuator and electric unit pin
terminals for damage or the connection of
ABS actuator and electric unit harness
connector. Reconnect ABS actuator and
electric unit harness connector. Then
retest.
Note: Wheel position should be distinguished by code
numbers except code No. 18 (sensor rotor).
.
.
.
.
TROUBLE DIAGNOSES FOR SELF-DIAGNOSTIC ITEMS
Diagnostic Procedure 1 (Wheel sensor or
rotor) (Cont'd)
BR-2020

SRS - See Supplemental Restraint
System ..................................................RS-2004
Start signal ................................................EC-2014
START - Wiring diagram ...........................EL-2012
Starting system ..........................................EL-2012
Steering wheel and column.......................ST-2002
Stop lamp ..................................................EL-2034
STOP/L - Wiring diagram ..........................EL-2034
Striking rod (M/T) ......................................MT-2006
Sub-gear (M/T) .........................................MT-2003
Sunload sensor .........................................HA-2084
Supplemental Restraint System ...............RS-2004
Supplemental restraint system - Wiring
diagram .................................................RS-2020
Swirl control valve control solenoid
valve ......................................................EC-2017
SWL/V - Wiring diagram ...........................EC-2017
Synchronizer (M/T) ...................................MT-2003
T
Tail lamp ....................................................EL-2030
TAIL/L - Wiring diagram ............................EL-2030
Thermal protector......................................HA-2021
Thermo control amp .......................HA-2022, 2073
Thermo switch ................................HA-2022, 2074Tire size......................................................GI-2007
Transmission case (M/T) ................MT-2002, 2005
Tread-FR&RR (Dimensions) ......................GI-2007
Trim ...........................................................BT-2007
Triple pressure switch.....................HA-2022, 2073
Turn signal lamp ........................................EL-2038
V
Vehicle identification number .....................GI-2006
Vehicle speed sensor (VSS).....................EC-2009
VSS - Wiring diagram ...............................EC-2009
W
Warning lamps...........................................EL-2072
Washer, front .............................................EL-2086
Wheel size..................................................GI-2007
Wheelbase (Dimensions) ...........................GI-2007
Width (Dimensions) ....................................GI-2007
WINDOW - Wiring diagram .......................EL-2109
WIPER - Wiring diagram ...........................EL-2086
Wiring diagram (cell code) list ...................EL-2171
ALPHABETICAL INDEX
IDX-2004

Precautions for SRS ``AIR BAG'' and ``SEAT
BELT PRE-TENSIONER'' Service
lDo not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
lBefore servicing the SRS, turn ignition switch ``OFF'', disconnect both battery cables and wait at least
3 minutes.
For approximately 3 minutes after the cables are removed, it is still possible for the air bag to deploy.
Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
lDiagnosis sensor unit must always be installed with their arrow marks ``S'' pointing towards the front of
the vehicle for proper operation. Also check diagnosis sensor unit for cracks, deformities or rust before
installation and replace as required.
lThe spiral cable must be aligned with the neutral position since its rotations are limited. Do not attempt
to turn steering wheel or column after removal of steering gear.
lHandle air bag module carefully. Always place driver and passenger air bag modules with the pad side
facing upward.
lConduct self-diagnosis to check entire SRS for proper function after replacing any components.
lAfter air bag inflates, the front instrument panel assembly should be replaced if damaged.
Special Service Tools
Tool number
Tool nameDescription
KV99106400
Deployment tool
NT357
Disposing of air bag module
KV99105300
Air bag module bracket
NT354
Anchoring air bag module
HT61961000 and
HT62152000 combined
*Special torx bit
NT361
Use for special bolts
[TAMPER RESISTANT TORX (Size T50)]
a: 3.5 (0.138) dia.
b: 8.5 - 8.6 (0.335 - 0.339) dia.
c: approx. 10 (0.39) sq.
Unit: mm (in)
KV99108300
Deployment tool adapters for
passenger air bag
NT776
*: Special tool or commercial equivalent
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
RS-2004