1999 Lexus ES300 Owner's Manuals (in English)

ELECTRICAL COMPONENTS
437
64E021
Light BulbsBulb No. W T
ype
1 Headlights (high beam) 9005 65
A
2 Headlights H7 55
B
(low and high beam)
3 Front turn signal and 1157NA 27/8
D
parking lights
4 Fog lights H3 55
C

ELECTRICAL COMPONENTS
438
64E022±3
Light BulbsBulb No. W T
ype
5 High mounted stoplight ±±± 21
E
6 Rear side marker lights ±±± 5
E
7 Tail and stop lights ±±± 21/5
E
8 Tail lights ±±± 5
E
9 License plate lights ±±± 5
E
10 Back±up lights ±±± 21
E
11 Rear turn signal lights ±±± 21
E

ELECTRICAL COMPONENTS
439
64E023±2
Light BulbsBulb No. W T
ype
12 Personal light ±±± 10
F
13 Vanity lights ±±± 1.5
F
14 Interior light ±±± 8
F
15 Door courtesy light ±±± 3.8
E
16 Glovebox light ±±± 1.2
E

ELECTRICAL COMPONENTS
440
64E024±4
Light BulbsBulb No. W T
ype17 Trunk light 194 2.8
F
A: HB3 halogen
bulbs
B: H7 halogen
bulbs
C: H3 halogen
bulbs
D: Single end
bulbs
E: Wedge base
bulbs
F: Double end
bulbs

ELECTRICAL COMPONENTS
441

SECTION 6 ± 5
442
SERVICE PROCEDURES AND
SPECIFICATIONS
Body
Specifications443
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Protecting your vehicle from corrosion 444
. . . . . . . . . . .
Washing and waxing 446
. . . . . . . . . . . . . . . . . . . . . . . . . .
Cleaning the interior 447
. . . . . . . . . . . . . . . . . . . . . . . . . . .

BODY
443
SPECIFICATIONS
± DIMENSIONS AND WEIGHTOverall length
Overall width
Overall height
Wheelbase
Tread ± Front ± Rear
Vehicle capacity weight (occupants + luggage)
4830 mm (190.2 in.)
1790 mm (70.5 in.)
1395 mm (54.9 in.)*
2670 mm (105.1 in.)
1545 mm (60.8 in.)
1520 mm (59.8 in.)
410 kg (900 lb.)
*: Unladen vehicle
± FUEL TANK
Capacity
70 L (18.5 gal., 15.4 lmp.gal.)

BODY
444
PROTECTING YOUR VEHICLEFROM CORROSION
Proper care of your Lexus can help ensure long±term
corrosion prevention.
The most common causes of corrosion to your
vehicle are:

The accumulation of road salt, dirt and moisture in
hard±to±reach areas under the vehicle.

Chipping of paint or undercoating caused by minor
accidents or by stones and gravel.
The following conditions will cause or accelerate
corrosion of your vehicle, so it is important to keep
your vehicle, particularly the underside, as clean as
possible and to repair any damage to paint or
protective coatings as soon as possible.

The presence of road salt or dust control chemicals,
salt in the air near the sea coast, industrial air
pollution.

High humidity, especially at temperatures just above
freezing point.

Certain parts of your vehicle are wet or damp for an
extended period of time, even though other parts of
the vehicle are dry.

Components of the vehicle which are prevented from
quick±drying due to lack of proper ventilation are exposed to high temperature.