Page 257 of 472
AIR CONDITIONING AND AUDIO
237
20E034±1
Push the ºDISCº button to select the disc number.
Push the button several times until the desired disc
number appears on the display. When you release the
button, the player will start playing the selected disc from
the first track. (d) Searching for a desired track
20E026±1
Page 258 of 472
AIR CONDITIONING AND AUDIO
238Push the ºSCANº button briefly.
ºSCANº will appear on the display. The compact disc
player will play the next track for 10 seconds, then scan
again. To select a track, push the ºSCANº button a
second time. If the player reaches the end of the disc,
it will continue scanning at track 1.
After
all the tracks are scanned in one pass, normal play
resumes. (e) Searching for a desired disc
Page 259 of 472
AIR CONDITIONING AND AUDIO
239
20E036±2
Push the ºSCANº button until you hear a beep.
With ºD.SCANº on the display, the program at the
beginning of each disc will be played for 10 seconds. To
continue listening to the program of your choice, push
the ºSCANº button a second time.
After all the discs in the magazine are scanned in one
pass, the scan function is cancelled.(f) Selecting a desired track
Page 260 of 472
AIR CONDITIONING AND AUDIO
240
20E037±2
ºTRACKº button: Use for direct access to a desired
track.
Push either side of the ºTRACKº button several times
until the desired track number appears on the display.
As you release the button, the player will start playing the
selected track from the beginning.
ºFast forwardº button.
Push the º º button and hold it to fast forward the disc.
When you release the button, the compact disc player
will resume playing from that position.
ºReverseº button.
Push the º º button and hold it to reverse the disc.
When you release the button, the compact disc player
will resume playing. (g) Other compact disc player functions
Page 261 of 472

AIR CONDITIONING AND AUDIO
241
20E038±2
ºRPTº button: Use it for automatic repeat of the track
you are currently listening to.
Push the button while the track is playing. When the
track is finished, the player will automatically go back to
the beginning of the track and play the track again. To
cancel it, push the button once again.
ºRANDº button: Use it for automatic track selection
and play by the system.
When the button is pushed, the system selects a track
in the discs which are set and plays it. To cancel it, push
the button once again.
When a track is skipped or the system is inoperative,
push the button to reset.(h) If the player malfunctions
If ºWAITº appears on the display, audio signals of the
disc
cannot be read or the system has trouble. Push the
ºCDº button once again.
If the player does not operate, check that the disc
surface is not soiled or damaged. If the disc is O.K., the
following cause is possible.
The temperature of the player's internal mechanism
is raised because of high external temperature.
Remove the magazine from the player to cool it.
If the player still does not operate, take it to your Lexus
dealer.
Page 262 of 472

AIR CONDITIONING AND AUDIO
242
Car audio system operating hints
NOTICE
To ensure the correct audio system operation:
Be careful not to spill beverages over the audiosystem.
Do not put anything other than a cassette tapeor CD magazine into the cassette tape slot or
CD changer.
The use of cellular phone inside or near thevehicle may cause a noise from the speakers of
the audio system which you are listening to. However, this does not indicate a malfunction.
Radio reception
Usually, the problem with radio reception does not mean
there is a problem with your radio ± it is just the normal
result of conditions outside the vehicle.
For example, nearby buildings and terrain can interfere
with FM reception. Power lines or telephone wires can
interfere with AM signals. And of course, radio signals
have a limited range, and the farther you are from a
station, the weaker its signal will be. In addition,
reception conditions change constantly as your vehicle
moves.
Here are some common reception problems that
probably do not indicate a problem with your radio:
FM
Fading and drifting stations ± Generally, the effective
range of FM is about 40 km (25 miles). Once outside this
range, you may notice fading and drifting, which
increase with the distance from the radio transmitter.
They are often accompanied by distortion.
Multi±path ± FM signals are reflective, making it
possible for two signals to reach your antenna at the
same time. If this happens, the signals will cancel each
other out, causing a momentary flutter or loss of
reception.
Static and fluttering ± These occur when signals are
blocked by buildings, trees, or other large objects.
Increasing the bass level may reduce static and
Page 263 of 472

AIR CONDITIONING AND AUDIO
243
fluttering.
Station swapping ± If the FM signal you are listening to
is interrupted or weakened, and there is another strong
station nearby on the FM band, your radio may tune in
the second station until the original signal can be picked
up again.
AM
Fading ± AM broadcasts are reflected by the upper
atmosphere ± especially at night. These reflected
signals can interfere with those received directly from
the radio station, causing the radio station to sound
alternately strong and weak.
Station interference ± When a reflected signal and a
signal received directly from a radio station are very
nearly the same frequency, they can interfere with each
other, making it difficult to hear the broadcast.
Static ± AM is easily affected by external sources of
electrical noise, such as high tension power lines,
lightening, or electrical motors. This results in static.
Caring for your cassette player and tapes
For high performance from your cassette player and
tapes:
Clean the tape head and other parts regularly.
A dirty tape head or tape path can decrease sound
quality and tangle your cassette tapes. The easiest
way to clean them is by using a cleaning tape. (A wet
type is recommended.)
Page 264 of 472
AIR CONDITIONING AND AUDIO
244Use high±quality cassettes:
Low±quality cassette tapes can cause many
problems, including poor sound, inconsistent playing
speed, and constant auto±reversing. They can also
get stuck or tangled in the cassette player.
Do not use a cassette if it has been damaged or
tangled or if its label is peeling off.
Do not leave a cassette in the player if you are not
listening to it, especially if it is hot outside.
Store cassettes in their cases and out of direct
sunlight.
Avoid using cassettes with a total playing time longer
than 100 minutes (50 minutes per side). The tape
used in these cassette is thin and could get stuck or
tangled in the cassette player. Caring for your compact disc player and discs
20L037