
The trouble code is indicated, as shown in the illustration at
left (Diagnostic trouble code º42º is
shown as an example).
HINT: When 2 or more trouble codes are stored in memory,
the lower±numbered code is displayed first. If no diagnostic
trouble code is output, or if a diagnostic trouble code is output
even though no diagnostic trouble code output operation is
performed,  check the TE 1 terminal circuit on page AT1±93.
DIAGNOSTIC TROUBLE CODE CHECK
BY USING TOYOTA HAND±HELD
TESTER
1.  Hook up the TOYOTA hand±held tester to the DLC2.
2.  Read the diagnostic trouble codes by following the prompts
on the tester screen.
Please refer to the TOYOTA hand±held tester operator's
manual for further details.
CANCELING DIAGNOSTIC TROUBLE
CODE
After repair of the trouble area, the diagnostic trouble code
retained  in the ECM memory must be canceled out by remov-
ing the EFI fuse for 10 seconds or more, with the ignition
switch OFF.
Check that the normal code is output after connecting the
fuse.
ECM TERMINALS STANDARD VALUE
ECM TERMINAL VALUES
MEASUREMENT BY USING TOYOTA BREAK±OUT ±BOX
AND TOYOTA HAND±HELD TESTER
1.  Hook up the TOYOTA break±out±box and TOYOTA
hand±held  tester to the vehicle.
2.  Read the ECM input/output values by following the prompts
on the tester screen.
HINT: TOYOTA  hand±held tester has a ºSnapshotº function.
This records the measured values and is effective in the diag-
nosis of intermittent problems.
Please refer to the TOYOTA hand±held tester / TOYOTA
break±out  box operator's manual for further details.
± AT340E (2JZ±GE) AUTOMATIC TRANSMISSIONTROUBLESHOOTINGAT1±35 

The trouble code is indicated as shown in the illustration at
left (Diagnostic trouble code º42º is shown as an example).
HINT: When 2 or more trouble codes are stored in memory,
the lower±numbered code is displayed first.
If no diagnostic trouble code is output, or if a diagnostic
trouble code is output even though no diagnostic trouble
code output operation is performed, check the TE1 terminal
circuit on page AT2±113
ECM DATA MONITOR USING TOYOTA
HAND±HELD TESTER
1.  Hook up the TOYOTA hand±held tester to the DLC2.
2.  Monitor the ECM data by following the prompts on the tester
screen.
HINT: TOYOTA hand±held tester has a ºSnapshotº function
which records the monitored data.
Please refer to the TOYOTA hand±held tester operator's
manual.
CANCELING DIAGNOSTIC TROUBLE
CODE
After repair of the trouble area, the diagnostic trouble code
retained  in the ECM memory must be canceled out by remov-
ing the EFI No.1 fuse for 10 seconds or more, with the ignition
switch OFF.
Check that the normal code is output after connecting the
fuse.
ECM TERMINALS STANDARD VALUE
ECM TERMINAL VALUES
MEASUREMENT BY USING TOYOTA BREAK±OUT ±BOX
AND TOYOTA HAND±HELD TESTER
1.  Hook up the TOYOTA break±out±box and TOYOTA
hand±held  tester to the vehicle.
2.  Read the ECM input/output values by following the prompts
on the tester screen.
HINT: TOYOTA hand±held tester has ºSnapshotº function.
This record the measured values and is effective in the diag-
nosis of intermittent problems.
Please refer to the TOYOTA  hand±held  tester/ TOYOTA
break±out±box  operator's manual for further details.
± A340E (2JZÐGTE) AUTOMATIC TRANSMISSIONTROUBLESHOOTINGAT2±35 

ECU DATA MONITOR USING TOYOTA
HAND±HELD TESTER
1.  Hook up the TOYOTA hand±held tester to the DLC2.
2.  Monitor the ECU data by following the prompts on the scan
tool screen.
HINT: TOYOTA hand±held tester has a ºSnapshotº function
which records the monitored data.
Please refer to the TOYOTA hand±held tester operator's
manual for further details.
DIAGNOSTIC TROUBLE CODE
CLEARANCE
1.  Using SST, connect terminals Tc and E1 of DLC2 or DLC1.
SST 09843±18020
2.  IG switch ON.
3.  Clear the diagnostic trouble codes stored in ECU by
depressing  the brake pedal 8 or more times within 3 seconds.
4.  Check that the warning light shows the normal code.
5.  Remove the SST from the terminals of DLC2 or DLC1.
6.  Connect the Short Pin to DLC1.
HINT: Cancellation can also be done by removing the ECU±B
fuse, but in this case, other memory systems will also be can-
celled out.
ECU TERMINAL VALUES
MEASUREMENT USING TOYOTA
BREAK±OUT±BOX AND TOYOTA
HAND±HELD TESTER
1.  Hook up the TOYOTA hand±held tester and TOYOTA
break±out±box  to the vehicle.
2.  Read the ECU input/output values by following the prompts
on the tester screen.
HINT: TOYOTA  hand±held tester has a ºSnapshotº function.
This records the measured values and is effective in the diag-
nosis of intermittent problems.
Please refer to the TOYOTA  hand±held  tester/TOYOTA
break±out±box  operators manual for further details.
± BRAKE SYSTEMANTI±LOCK BRAKE SYSTEM (ABS)BR±55 

DIAGNOSTIC TROUBLE CODE CHECK
USING TOYOTA HAND±HELD TESTER
1.  Hook up the TOYOTA hand±held tester to the DLC2.
2.  Read the diagnostic trouble codes by following the prompts
on the tester screen.
Please refer to the TOYOTA hand±held tester operation's
manual for further details.
DIAGNOSTIC TROUBLE CODE CLEARANCE
1.  After repair of the trouble areas, the diagnostic trouble code
retained in the ECM memory must be cleared out by
removing the EFI No.1 fuse (30A) from R/B No.2 for 10
seconds  or more, with the ignition switch OFF.
HINT:
wCancellation  can also be done by removing the negative
(±) terminal cable from the battery, but in this case, other
memory systems (clock, etc.) will also be cancelled out.
wIf it is necessary to work on engine components
requiring removal of the negative (±) terminal cable from
the battery, a check must first be made to see if a
diagnostic  trouble code has been recorded.
2. After cancellation, road test the vehicle to check that a normal
code is now read on the malfunction indicator lamp.
If the same diagnostic trouble code appears, it indicates that
the trouble area has not been repaired thoroughly.
ECM DATA MONITOR USING TOYOTA
HAND±HELD TESTER
1.  Hook up the TOYOTA hand±held tester to the DLC2.
2.  Monitor the ECM data by following the prompts on the tester
screen.
HINT: TOYOTA hand±held tester has a ºSnapshotº function which
records the monitored data.
Please refer to TOYOTA hand±held tester operator's manual for
further details.
ECM TERMINAL VALUES MEASUREMENT
USING TOYOTA BREAK±OUT±BOX AND
TOYOTA HAND±HELD TESTER
1.  Hook up the TOYOTA break±out±box and TOYOTA
handheld  tester to the vehicle.
2.  Read the ECM input/output values by following the prompts
on the tester screen.
HINT: TOYOTA hand±held tester has a ºSnapshotº function. This
records the measured values and is effective in the diagnosis of
intermittent problems.
Please refer to TOYOTA  hand±held  tester/TOYOTA  break±out
box operator's manual for further details.
± ENGINE2JZ±GE ENGINE TROUBLESHOOTINGEG±387 

DIAGNOSTIC TROUBLE CODE CHECK
USING TOYOTA HAND±HELD TESTER
1.  Hook up the TOYOTA hand±held tester to the DLC2.
2.  Read the diagnostic trouble codes by following the prompts
on the tester screen.
Please refer to the TOYOTA hand±held tester operation's manual
for further details.
DIAGNOSTIC TROUBLE CODE
CLEARANCE
1.  After repair of the trouble areas, the diagnostic trouble code
retained in the ECM memory must be cleared out by
removing the EFI No.1 fuse (30A) from R/B No.2 for 10
seconds  or more, with the ignition switch OFF.
HINT:
wCancellation  can also be done by removing the negative
(±) terminal cable from the battery, but in this case, other
memory systems (clock, etc.) will also be cancelled out.
wIf it is necessary to work on engine components
requiring removal of the negative (±) terminal cable from
the battery, a check must first be made to see if a
diagnostic  trouble code has been recorded.
2. After cancellation, road test the vehicle to check that a normal
code is now read on the malfunction indicator lamp.
If the same diagnostic trouble code appears, it indicates that
the trouble area has not been repaired thoroughly.
ECM DATA MONITOR USING TOYOTA
HAND±HELD TESTER
1.  Hook up the TOYOTA hand±held tester to the DLC2.
2.  Monitor the ECM data by following the prompts on the tester
screen.
HINT: TOYOTA hand±held tester has a ºSnapshotº function which
records the monitored data.
Please refer to TOYOTA hand±held tester operator's manual for
further details.
ECM TERMINAL VALUES
MEASUREMENT USING TOYOTA
BREAK±OUT±BOX AND TOYOTA
HAND±HELD TESTER
1.  Hook up the TOYOTA break±out±box and TOYOTA
handheld  tester to the vehicle.
2.  Read the ECM input/output values by following the prompts
on the tester screen.
HINT: TOYOTA hand±held tester has a ºSnapshotº function. This
records the measured values and is effective in the diagnosis of
intermittent problems.
Please refer to TOYOTA  hand±held tester/TOYOTA  break±out±
box operator's manual for further details.
± ENGINE2JZ±GTE ENGINE TROUBLESHOOTINGEG±493