Page 602 of 2543

TORQUE SPECIFICATIONS
Part tightened NVm kgfVcm ftVlbf
No.1 vehicle speed sensor 16 160 12
No.2 vehicle speed sensor 5.4 55 48 in.Vlbf
O/D direct clutch speed sensor 5.4 55 48 in.Vlbf
A/T fluid temp. sensor 15 150 11 Valve body 10 100 7 Oil strainer 10 100 7
Oil pan
7.4
75
65 in.Vlbf
Starter 37 380 27
Rear support X Body 25 260 19
Torque converter X Drive plate 34 340 25
Oil cooler union nut 34 350 25
Oil cooler pipe bracket 10 100 7
Propeller shaft X Transmission 56 570 41 Propeller shaft X Differential 79 805 58
Propeller shaft center support
49
500
36
Propeller shaft adjusting nut 53 540 39
Oil pan drain plug 17 175 13
Drive plate X Torque converter 33 340 25
Drive plate X Crankshaft 64 650 47
Transmission X Engine block 14 mm bolt
17 mm bolt
37
72
380
730
27
53
Park/neutral position switch X Transmission case 16 160 12
Transmission output flange 123 1,250 90
Shift control rod X Shift lever 13 130 9 Shift control rod X Park/neutral position switch 16 160 12
Exhaust pipe bracket X Transmission housing
37
380
27
No.2 exhaust pipe X Center exhaust pipe 58 590 43
Rear center floor crossmember brace X Body 13 130 9
Heat insulator X Body 5.4 55 48 in.Vlbf
AT2±118± A340E (2JZÐGTE) AUTOMATIC TRANSMISSIONSERVICE SPECIFICATIONS
Page 1204 of 2543
ABBREVIATIONS USED IN THIS
MANUAL
ABS Anti±Lock Brake System
ALR Automatic Locking Retractor
APPROX. Approximately
A/T, ATM Automatic Transmission
AT F Automatic Transmission Fluid
BTDC Before Top Dead Center
CB Circuit Breaker
CD Compact Disc CRS Child Restraint System DOHC Double Over Head Cam
DP
Dash Pot
ECU Electronic Control Unit
ELR Emergency Locking Retractor
ESA Electronic Spark Advance
ETR Electronic Turning Radio
EX Exhaust
FIPG Formed in Place Gasket
FL Fusible Link
Fr Front H±Fuse High Current Fuse
IG
Ignition
IN Intake
JB Junction Block
LED Light Emitting Diode
LH Left±Hand
LSD Limited Slip Differential
Max. Maximum
MP Multipurpose
M/T Manual Transmission O/D Overdrive O/S Oversize
P & BV
Proportioning and By±pass Valve
PCV Positive Crankcase Ventilation
PPS Progressive Power Steering
PS Power Steering
± INTRODUCTIONABBREVIATIONS USED IN THIS MANUALIN±37
Page 1238 of 2543

PREPARATION
RECOMMENDED TOOLS
09200±00010 Engine Adjust Kit.
EQUIPMENT
Dial indicator Brake disc
Micrometer Brake disc
Mirror Brake hose
Thermometer
Torque wrench
Vernier calipers Parking brake drum
COOLANT
Item Capacity Classification
Engine coolant 2JZ±GE M/T
(w/ Heater) A/T7.3 liters (7.7 US qts, 6.4 lmp. qts)
8.3 liters (8.8 US qts, 7.3 lmp. qts)Ethylene±glycol base
()
2JZ±GTE M/T
A/T
(q q)
9.5 liters (10.0 US qts, 8.4 lmp. qts)
9.4 liters (9.9 US qts, 8.3 lmp. qts)
LUBRICANT
Item Capacity Classification
Engine oil (Drain and refill) (2JZ±GE)
w/ Oil filter change
w/o Oil filter change
5.3 liters (5.6 US qts, 4.7 lmp. qts)
4 9 liters (5 2 US qts 4 3 lmpqts)
API grade SH, Energy±Conserving II
multigrade engine oil or ILSAC multi-
grade engine oil and recommended
w/o Oil filter change4.9 liters (5.2 US qts, 4.3 lmp. qts)grade engine oil and recommended
viscosity oil, with SAE 5W±30 being
preferred engine oil
Engine oil (Drain and refill) (2JZ±GTE)
w/ Oil filter change
5.0 liters (5.3 US qts, 4.4 lmp. qts)
API grade SH, Energy±Conserving II
mutigrade engine oil or ILSAC multi-
g
w/o Oil filter change
(q q)
4.7 liters (5.0 US qts, 4.1 lmp. qts)
gg
grade engine oil and recommended
viscosity oil
Manual transmission oil 2JZ±GE2.6 liters (2.7 US qts, 2.3 lmp. qts)API GL±5 SAE 75W±90
2JZ±GTE
(q, q)
1.8 liters (1.9 US qts, 1.6 lmp. qts)Castle gear oil V160
Automatic transmission 2JZ±GE1.6 liters (1.7 US qts, 1.4 lmp. qts)ATF DEXRON® II
fluid (Drain and refill) 2JZ±GTE
(q, q)
1.9 liters (2.0 US qts, 1.7 lmp. qts)ATF TYPE T±II
Differential oil1.35 liters (1.43 US qts, 1.19 lmp. qts)API GL±5
Above±185 C (05 F)
SAE 90
SAE 90
Below±185 C (05 F)
SAE 80W±90 or 80W
± MAINTENANCEPREPARATIONMA±5
Page 1247 of 2543

21. REPLACE TRANSMISSION OIL (FLUID) AND
DIFFERENTIAL OIL
A. Replace manual transmission oil
(a) Remove the filler and drain plugs, and drain the oil.
(b) Reinstall the drain plug securely.
(c) Add fresh oil untill it begins to run out of the filler hole.
Transmission oil:
2JZ±GE
Oil grade
API GL±5
Viscosity
SAE 75W±90
Capacity
2.6 liters (2.7 US qts, 2.3 lmp. qts)
2JZ±GTE
Oil
Castle gear oil V160
Capacity
1.8 liters (1.9 US qts, 1.6 lmp. qts)
B. Replace automatic transmission fluid
(a) Remove the drain plug, and drain the fluid.
(b) Clean the drain plug.
(c) Reinstall the drain plug securely.
(d) With the engine OFF, add new fluid through the dip±stick
tube.
Transmission fluid:
2JZ±GE
Fluid type
ATF DEXRON® II or equivalent
Drain and refill capacity
1.6 liters (1.7 US qts, 1.4 lmp. qts)
2JZ±GTE
Fluid type
ATF type T±II or equivalent
Drain and refill capacity
1.9 liters (2.0 US qts, 1.7 lmp. qts)
(e) Start the engine and shift the selector into all positions from
ºPº through ºLº, and then shift into ºPº position.
(f) With the engine idling, check the fluid level. Add fluid up the
ºCOOLº range on the dipstick. MA±14
± MAINTENANCEMAINTENANCE OPERATIONS
Page 1251 of 2543

18. BRAKE PEDAL
(a) Check that pedal for smooth operation.
(b) Check that the pedal has the proper reserve
distance and freeplay.
(c) Check the brake booster function.
19. BRAKES
At a safe place, check that the brakes do not
pull to one side when applied.
20. PARKING BRAKE
(a) Check that the pedal has the proper travel.
(b) On a safe incline, check that the vehicle is
held securely with only the parking brake
applied.
21. AUTOMATIC TRANSMISSION PARK
MECHANISM
(a) Check the lock release button of the selector
lever for proper and smooth operation.
(b) On a safe incline, check that the vehicle is
held securely with the selector lever in the ºPº
position and all brakes released.
UNDER HOOD
22. WINDSHIELD WASHER FLUID
Check that there is sufficient fluid in the tank.
23. ENGINE COOLANT LEVEL
Check that the coolant level is between the
LEVEL lines on the see±through reservoir at
normal temperature (20°C (68°F)).
24. RADIATOR AND HOSES
(a) Check that the front of the radiator is clean
and not blocked with leaves, dirt or bugs.
(b) Check the hoses for cracks, kinks, rot or
loose connections.
25. BATTERY ELECTROLYTE LEVEL
Check the indicator.
When the indicator color is blue, the condition
is satisfactory. A red color indicates that dis-
tilled water must be added, and white indi-
cates that charging is necessary.
26. BRAKE FLUID LEVEL
Check that the brake fluid level is near the up-
per level line on the see±through reservoir.27. ENGINE DRIVE BELT
Check drive belt for fraying, cracks, wear or
oil contamination.
28. ENGINE OIL LEVEL
Check that level on the dipstick with the en-
gine turned off.
29. POWER STEERING FLUID LEVEL
Check the level on the dipstick.
The level should be in the ºHOTº or ºCOLDº
range depending on the fluid temperature.
30. A U TO M AT I C TRANSMISSION FLUID
LEVEL
(a) Park the vehicle on a level surface.
(b) With the engine idling and the parking and
foot brake applied, shift the selector into all
positions from ºPº to ºLº, and then shift into ºPº
position.
(c) Turn and pull out the dipstick and wipe off the
fluid with a clean rag.
Re±insert the dipstick fully and check that the
fluid level is in the ºHOTº range.
(d) Perform this check with the fluid at normal
driving temperature (70±80°C (158±176°F)).
If the level is at the low side, add fluid.
NOTICE: Do not overfill.
HINT: Wait about 30 minutes before checking
the fluid level after extended driving at high
speeds in hot weather, driving in heavy traffic
or with a trailer.
31. EXHAUST SYSTEM
Visually inspect for cracks, holes or loose
supports.
If any change in the sound of the exhaust or
smell of the exhaust fumes is noticed, have
the cause located and correted. MA±18
± MAINTENANCEGENERAL MAINTENANCE