1995 NISSAN ALMERA N15 coolant reservoir

SEC.214

10

~ :N.m (kg-m, in-Ib)
ENGINE
COOLING SYSTEM
Radiator

~~ 3.7.5.0(0.38-0.51, 33.0•44.3)
~~ 3.8.4.5 (0.39 •0.46, 33.9.39.9)

. I
L!
\[jj
3.'-4.5 (0.39 -0.45,3>' -39.')

~,,~ 'fl
'~~WI- 1

I
--
5'\

,
),

"~

" It, -~ ~,.../ "---./"-- ~~
n.- /

i ~
r~ ~ ~'".~

i
@
'0)"
I

I
Jl~J)
1~~
6.86 •

~ "" <>!.
0
(0.70,60.7)

",,~~@
SLC991AB

G)
Reservoir tank

@
Reservoir tankbracket

@
Radiator cap

@
Mounting bracket

@
Upper hose
@

Washer

(J)
Drain plug

@
Mounting rubber

@
Oilcooler hose(AfTmodels)
@l

Radiator

@
Lower hose

@
Cooling fan

@
Cooling fanmotor

Cooling fancontrol system

• Cooling fansarecontrolled bythe ECM. Fordetails, referto
EC section ("Cooling FanControl", "TROUBLE DIAG-
NOSES").

Refilling enginecoolant

• For details onrefilling enginecoolant, refertoMA section
("REFILLING ENGINECOOLANT", "ChangingEngine
Coolant").

LC-16

SEC.214

10
ENGINE
COOLING SYSTEM
Radiator
SLC039BA
•

CD
Reservoir tank

@
Reservoir tankbracket

@
Radiator cap

@
Mounting bracket

CID
Upper hose
@

Washer

(J)
Drain plug

CID
Mounting rubber

@
Oilcooler hose
(AfT
models)
@)

Radiator

@
Lower hose

@
Cooling fan

@
Cooling fanmotor

Cooling fancontrol system

• Cooling fansarecontrolled bythe ECM. Fordetails, referto
EC section ("Cooling FanControl", "TROUBLE
DIAGNOSES").

Refilling enginecoolant

• For details onrefilling enginecoolant, refertoMA section
("REFILLING ENGINECOOLANT", "ChangingEngine
Coolant").

LC-25

PRE-DELIVERYINSPECTIONITEMS
Shown belowarePre-delivery InspectionItemsrequired forthe new vehicle. Itis recommended that
necessary itemsotherthanthose listedherebeadded, payingdueregard tothe conditions ineach
country.

Perform applicable itemsoneach model. Consult textofthis section forspecifications .

UNDER HOOD-engine off

o
Radiator coolantlevelandcoolant hosecon-
nections forleaks

o
Battery fluidlevel, specific gravityandcondi-
tions ofbattery terminals

o
Drive beltstension

D
Fuel filter forwater ordusts, andfuel lines
and connections forleaks
[] Engine oillevel andoilleaks

D
Clutch andbrake reservoir fluidlevel and
fluid lines forleaks

o
Windshield andrear window washerand
headlamp cleanerreservoir fluidlevel

D
Power steering reservoir fluidlevel andhose
connections forleaks

ON INSIDE ANDOUTSIDE

D
Remove frontspring/strut spacer(Ifapplica-
ble)

D
Operation ofall instruments, gauges,lights
and accessories

o
Operation ofhorn(s), wiperandwasher
[] Steering lockforoperation
[] Check airconditioner forgas leaks

o
Front andrear seats, andseat belts foroper-
ation

n
All moldings, trimsandfittings forfitand
alignment

[J
Allwindows foroperation andalignment

n
Hood, trunklid,door panels forfitand align-
ment

[1
Latches, keysandlocks foroperation

rl
Weatherstrips foradhesion andfit

[l
Headlamp aiming
I~ Tighten wheelnuts(Inc. inner nutsifapplica-
ble)
IJ Tire pressure (Inc.spare tire)

Il
Check frontwheels fortoe-in
IJ Install clock/voltmeter/room lampfuse(If
applicable)
~ Install deodorizing filtertoair purifier (If
applicable)
~ Remove wiperbladeprotectors (Ifapplicable)
UNDER
BODY

o
Manual transmission/transaxle, transferand
differential gearoillevel

D
Brake andfuel lines andoil/fluid reservoirs
for leaks

D
Tighten boltsandnuts ofsteering linkageand
gear box,suspension, propellershaftsand
drive shafts
~ Tighten rearbody boltsandnuts (Models with
wooden bedonly)

ROAD TEST

D
Clutch operation

D
Parking brakeoperation

[J
Service brakeoperation

D
Automatic transmission/transaxle shifttiming
and kickdown
[] Steering controlandreturnability

o
Engine performance

D
Squeaks andrattles

ENGINE OPERATING ANDHOT

D
Adjust idlemixture andspeed (andignition
timing*1)

n
Automatic transmission/transaxle fluidlevel
~ Engine idlingandstop knob operation (Diesel
only)

FINAL INSPECTION

n
Install necessary parts(outside mirror,wheel
covers, seatbelts, mat,carpet ormud flaps)

[1
Inspect forinterior andexterior metaland
paint damage
[] Check forspare tire,jack, tools (wheel
chock), andliterature

n
Wash, cleaninterior andexterior

"1: Not required onmodels withadirect ignition system
~ :Not appiicable tothis model.
•

MA-5

GENERALMAINTENANCE

General maintenance includesthoseitemswhich should bechecked duringthenormal day-to-day
operation ofthe vehicle. Theyareessential ifthe vehicle isto continue operating properly.Theowners
can perform thechecks andinspections themselves orthey canhave theirNISSAN dealersdothem.

Item

OUTSIDE THEVEHICLE

The maintenance itemslistedhereshould beperformed fromtimetotime, unless oth-
erwise specified.

Tires
Check thepressure withagauge periodically whenataservice station, including
the spare, andadjust tothe specified pressureifnecessary. Checkcarefully fordamage,
cuts orexcessive wear.

Windshield wiperblades
Checkforcracks orwear ifthey donot wipe properly.

Doors andengine hood
Check thatalldoors, theengine hood,thetrunk lidand back
door operate properly. Alsoensure thatalllatches locksecurely. Lubricate hinges,
latches, rollersandlinks ifnecessary. Makesurethatthesecondary latchkeeps thehood
from opening whentheprimary latchisreleased.
When driving inareas usingroadsaltorother corrosive materials, checkforlubrication
frequently.

Tire rotation
Tiresshould berotated every
10,000
km
(6,000
miles).

INSIDE THEVEHICLE

The maintenance itemslistedhereshould bechecked onaregular basis,suchaswhen
performing periodicmaintenance, cleaningthevehicle, etc.

Lights
Makesurethattheheadlights, stoplights, taillights, turnsignal lights,andother
lights arealloperating properlyandinstalled securely. Alsocheck headlight aim.

Warning lightsandbuzzers/chimes
Makesurethatallwarning lightsandbuzzers/chimes
are operating properly.

Steering wheel
Check forchange inthe steering conditions, suchasexcessive freeplay,
hard steering orstrange noises.

Free play: Lessthan35mm (1.38 in)
Seat belts
Check thatallparts ofthe seat beltsystem (e.g.buckles, anchors, adjusters
and retractors) operateproperly andsmoothly, andareinstalled securely. Checkthebelt
webbing forcuts, fraying, wearordamage.

UNDER THEHOOD ANDVEHICLE

The maintenance itemslisted hereshould bechecked periodically e.g.each timeyou
check theengine oilorrefuel.

Windshield washerfluid
Check thatthere isadequate fluidinthe tank.

Engine coolant level
Check thecoolant levelwhen theengine iscold.

Engine oillevel
Check thelevel afterparking thevehicle onalevel spotandturning off
the engine.

Brake andclutch fluidlevels
Makesurethatthebrake andclutch fluidlevels arebetween
the "MAX" and"MIN" linesonthe reservoir.

Battery
Checkthefluid level ineach cell.Itshould bebetween the"MAX" and"MIN"
lines.

MA-6
Reference
pages
MA-51
MA-50
MA-19,38
MA-24, 33,41
MA-45,47

RECOMMENDEDLUBRICANTSANDFLUIDS
Lubricants andFluids
Capacity (Approximate)
Liter Impmeasure Recommended
lubricants
and fluids
Anti-freeze coolant
(Ethylene glycolbase)
or soft water

5-1/4

qt

5-5/8
qt

5-3/8
qt

5-7/8
qt

4-7/8
qt

5-3/8
qt

5-1/8
qt

5-1/2
qt

3.2

2-7/8
qt For
Europe:
3.4 3qt API
SGorSH*1
Except forEurope:
2.8
2-1/2
qt
APISE,SF,SGorSH*1
3.2
2-718
qt
5.1
4-1/2
qt API
CD*1
4.6 4qt
5.9

6.4

6.1

6.6

5.6
6.1
5.8

6.3

GA
SR20DE GA
SR20DE
GA series
(M/T)

GA series
(A/T)

SR series
(M/T)

SR series
(A/T)

GA series
(M/T)

GA series
(A/T)

SR series
(M/T)

SR series (AfT)
Without
heater
Without
oilfilter
Engine
oil(Refill)
Gasoline With oilfilter
Diesel With oilfilter CD20
Without oilfilter CD20
Cooling system
(With reservoir tank)
Gasoline With heater
Diesel With heater
Without heater CD20
CD20 5.2

4.9
4-5/8

qt

4-3/8
qt

Manual transaxle gearoil
RS5F30A
RS5F31A
RS5F32A
Automatic transaxlefluid
RL4F03A
Power steering fluid
Brake
&
clutch fluid
Multi-purpose grease
2.8
-3.0

2.9 -3.2
3,7 -3.9

7.0
4-7/8
-5-1/4
pt

5-1/8 -5-5/8
ptAPIGL-4*1

6-1/2 -6-7/8
pt

Genuine NISSANATForequiv-

6-1/8
qt alent*2
Type DEXRON™
For Europe:

0013
orDOT4 (USFMVSS
NO. 116)*3
Except forEurope:
DOT3 (USFMVSS NO.116)
NLGI NO.2 (Lithium soapbase)
*1: For further details, see"SAE Viscosity Number". _
*2: For morainformation regardingsuitablefluids,contact aNISSAN dealership forcorrect brandofDEXRON
'P:
liE or
DEXRON:
A
III.
*3: Never mixdifferent typesoffluids (DOT3 and
0014).

MA-14

ENGINEMAINTENANCE
AMA054 Changing
EngineCoolant
WARNING:
To avoid being scalded, neverchange thecoolant whenthe
engine ishot.

-DRAINING ENGINECOOlANT-

1. Move heater "TEMP" controlleverallthe way to"HOT".

• Make surethatblower switchis"OFF".
•

Front
Fronl
'*'

LOOSEN

'--

Radialor

DI1211M
2.
Open radiator drainplugatthe bottom ofradiator, and
remove radiator cap.
3. Remove reservoir tank,drain coolant, thenclean reservoir
tank. Install ittemporarily.

• Becareful nottoallow coolant tocontact drivebelts.

4. Remove cylinder blockdrain plugandairrelief plug.

-FLUSHING COOLINGSYSTEM-

S. Install radiator drainplug,cylinder blockdrain plugandair
relief plug
CID
securely.
6. Fill radiator withwater untilwater spillsfromtheairrelief
plug @hole, theninstall airrelief plug@.
Fill radiator andreservoir tankwithwater andinstall radi-
ator cap.

Air relief plug:

~ :7 -
8 N'm (0.7-0.8 kg-m, 61-69 in-Ib)
MA-19

MAX,

MIN.
ENGINE
MAINTENANCE [QK]
Changing EngineCoolant (Cont'd)

7. Warm upengine untilcooling fanoperates, thenrace
engine 2or 3times under no-load.
8. Stop engine andwait until itcools down.
9. Drain water.
10. Repeat steps2through 9until clear water begins todrain
from radiator.

-REFILLING ENGINECOOLANT-

11. Install reservoir tank,radiator drainplug,cylinder block
drain plugandairrelief plug
@.

• Apply sealant tothe thread ofcylinder blockdrainplug.

toJ:
34-44 N.m (3.5-4.5 kg-m, 25-33 ft-Ib)
12. Fill radiator withcoolant untilcoolant spillsfromtheair
relief plug
@
hole, theninstall airrelief plug
@.

13. Fill radiator andreservoir tankwithcoolant uptospecified
level andinstall radiator cap.
Air relief plug:
~: 7-8 N.m (0.7-0.8 kg-m, 61-69 in-Ib)
For coolant mixture ratio,refertoMA-16.
Coolant capacity (Withreservoir tank):

Unit:f(Imp qt)
With heater
Withoutheater
M/T 5.9(5-1/4) 5.6(4-7/8)
AIT 6.4(5-5/8) 6.1(5-3/8)

Reservoir tankcapacity (forMAX level):

o.n
(5/8Impqt)
Pour coolant through coolantfillerneckslowly toallow airin
system toescape.
14. Warm upengine tonormal operating temperature.
15. Run engine at2,500 rpmfor10seconds andreturn toidle
speed.
• Repeat 2or 3times.
Watch coolant temperature gaugesoas not tooverheat the
engine.

SMA4128
MA-20

SLC053B
Water
inlet
Wateroutlet ENGINE
MAINTENANCE
@KJ

Changing EngineCoolant (Cont'd)

16. Stop engine andcool itdown.
• Cool down usingafan toreduce thetime.
17. Remove theradiator fillercapand check coolant level.

• If
necessary, refillradiator uptofiller neckwithcoolant. •
18. Refill reservoir tanktoMax linewith coolant. •
19. Repeat step14through step18two ormore times.
20. Warm upengine, andcheck forsound ofcoolant flowwhile
running enginefromidleupto4,000 rpmwith heater tem-
perature controlsetatseveral positions betweenCOOLand

HOT.

• Sound maybenoticeable atheater watercock.
21. Ifsound isheard, bleedairfrom cooling systembyrepeat-
ing steps 14through 18until coolant levelnolonger drops.

• Clean excess coolant fromengine.
CAUTION:
When heater unitisremoved orreplaced, refillengine coolant
as shown, removing heaterhoseatfeeding connector on
engine.
Checking CoolingSystem
CHECKING HOSES

Check hosesforimproper attachment andforleaks, cracks,
damage, looseconnections, chafinganddeterioration.

CHECKING RADIATORCAP

Apply pressure toradiator capwith captester tosee if
it
is sat-
isfactory.
Radiator caprelief pressure:
Standard 78 -98 kPa
(0.78 •0.98 bar,0.8-1.0 kg/cm
2,
11.14 psi)
Limit
59 -98 kPa
(0.59 -0.98 bar,0.6-1.0 kg/cm
2,
9-14 psi)
SLC613-A
MA-21