Heater Uni t
Replacemen t
SRS component s ar e locate d i n thi s area . Revie w th e
SR S componen t locations , precautions , an d procedure s
i n th e SR S ( sectio n 24 ) befor e performin g repair s o r ser -
vice .
1 . Disconnec t th e negativ e cabl e fro m th e battery .
2 . Whe n th e engin e i s cool , drai n th e engin e coolan t
fro m th e radiato r (se e sectio n 10 ).
D o no t remov e th e radiato r ca p whe n
th e engin e i s hot ; th e engin e coolan t i s unde r pres -
sur e an d coul d severel y scal d you .
3 . Remov e th e mountin g nu t an d th e heate r valve ,
the n disconnec t th e heate r hose s fro m th e heate r
unit.
CAUTION : Engin e coolan t wil l damag e paint .
Quickl y rins e an y spille d engin e coolan t fro m paint -
e d surfaces .
NOTE : Engin e coolan t wil l ru n ou t whe n th e hose s
ar e disconnected ; drai n i t int o a clea n dri p pan .
HEATE R HOS E
(OUTLE T SIDE ) HEATE
R HOS E
(INLE T SIDE )
CLAMP S
HEATE R VALV E
6 x 1. 0 m m9.8 N- m (1. 0 kgf-m ,
7. 2 Ibf-ft )
4. Remov e th e dashboar d (se e sectio n 20 ). 5
. Remov e th e seve n mountin g bolt s an d th e steerin g
hange r beam .
8 x 1.2 5 mm22 N- m (2. 2 kgf-m , 1 6 Ibf-ft )
8 x 1.2 5 mm22 N- m (2. 2 kgf-m , 1 6 Ibf-ft ) STEERIN
G HANGE R BEA M
6. Remov e th e wir e harnes s clips , th e thre e self-tap -
pin g screw s an d th e pip e cover .
PIPE COVE R WIR
E HARNES S CLIP S
ProCarManuals.com
