1993 BUICK PARK AVENUE Owners Manual

Top Strap Vehicles first sold in Canada have child restraint anchor
bracket hardware in the glove box, along with
instructions for installing it. This should be used only
with a child restraint, and only to secure
a child restraint
at the center rear seating position. Additional anchor
brackets for child restraints at one or both
of the rear
outside seating positions are available at Buick
dealerships in Canada.
If your child restraint has a top strap, it should be
anchored.
If you need to have an anchor installed, you can ask
your Buick dealer to put it in for
YOU. If you want to
install an anchor yourself, your dealer can tell
you how
to do it.
Securing a Child Restraint in a Rear
Outside Position
You’ll be using the lap-shoulder belt. See the earlier
section about the top strap if the child restraint has one.
1. Put the restraint on the seat. Follow the instructions
for the child restraint.
47
ProCarManuals.com

2. Secure the child in the child restraint as the
instructions say.
3. Pull out the vehicle’s safety belt and run the lap part
through or around the restraint. The child restraint
instructions will show you how.
See
if the shoulder belt would go in front of the
child’s face
or neck. If so, put it behind the child
restraint.
4. Buckle the belt. Make sure the release button faces
upward
or outward, so you’ll be able to unbuckle it
quickly
if you ever need to.
ProCarManuals.com

5. Pull the rest of the lap belt all the way out of the
retractor to set the lock.
?
6. To tighten the belt, feed the lap belt into the retractor
while
you push down on the child restraint.
'5. '?
ProCarManuals.com

To remove the child restraint, just unbuckle the vehicle’s
safety belt and let
it go back all the way. The safety belt
will move freely again and be ready to work for an adult
or larger child passenger.
Securing a Child Restraint in a Center Seat
Position
When you secure a child restraint in a center seating
position, you’ll be using the lap belt.
7. Push and pull the child restraint in different
directions
to be sure it is secure.
ProCarManuals.com

See the earlier section about the top strap if the child
restraint has one.
1. Make the belt as long as possible by tilting the latch
plate and pulling it along the belt.
2. Put the restraint on the seat. Follow the instructions
for the child restraint.
3. Secure the child in the child restraint as the
instructions say.
4. Run the vehicle’s safety belt through or around the
restraint. The child restraint instructions will show
you how.
5. Buckle the belt. Make sure the release button faces
upward
or outward, so you’ll be able to unbuckle it
quickly if you ever need to.
6. To tighten the belt, pull its free end while you push
down on the child restraint.
51
ProCarManuals.com

7. Push and pull the child restraint in different
directions
to be sure it is secure. If the child restraint
isn’t secure, turn the latch plate over and buckle it
again. Then see if it is secure. If
it isn’t, secure the
restraint in a different place in the vehicle and
contact the child restraint maker for their advice.
To remove the child restraint, just unbuckle the vehicle’s
safety belt.
It will be ready to work for an adult or larger
child passenger.
Securing a Child Restraint in the Right
Front Seat
n
u
You’ll be using the lap-shoulder belt. See the earlier
section about the top strap if the child restraint has one.
1. Put the restraint on the seat. Follow the instructions
for the child restraint.
!. Secure the child in the child restraint as the
instructions say.
3. Pull out the vehicle’s safety belt and run the lap part
through or around
the restraint. The child restraint
instructions will show
you how.
See if the shoulder belt would go
in front of the
child’s face or neck.
If so, put it behind the child
restraint.
52
ProCarManuals.com

4. Buckle the belt.
Make sure the release button faces upward or
outward,
so you’ll be able to unbuckle it quickly if
you ever need to.
5. Pull the rest of the lap belt all the way out of the
retractor to set the lock.
6. To tighten the belt, feed the lap belt back into the
retractor while
you push down on the child restraint.
ProCarManuals.com

A
1
I
7. Push and pull the child restraint in different
A
directions to be sure it is secure.
Children who have outgrown child restraints should
To remove the child restraint, just unbuckle the vehicle's wear the safety belts.
safety belt and let it
go back all the way. -
The safety belt will move freely again and be ready to
work for an adult or larger child passenger. If you
have the choice, a child should sit next to a
window so the child can wear a lap-shoulder belt and
get the additional restraint a shoulder belt can provide.
ProCarManuals.com