Illustration
Part No. Part Name
Note
09031 - 00030
Pin Punch
Part Name
Note
Feeler gauge
Check major clearance.
Vernier caliper with depth gauge
Check length of second coast brake piston rod.
Dial indicator with magnetic base
Check piston stroke and end play of the output shaft.
Dial indicator Check inside diameter of major bushing.
Straight edge Check side clearance of oil pump.
Torque wrenchPart Name Part No. Use etc.
Seal packing 1281,
Three bond 1281 or equivalent08826 - 00090Transfer right case y Transfer left case (A540H)
Transfer inspection hole cover (A540H)
Transfer case y Differential carrier cover
Differential LH bearing retainer (A540E, A540H)
Differential RH retainer (A540E)
Transaxle y Transfer assembly (A540H)
Adhesive 1324,
Three bond 1324 or equivalent08833 - 00070Differential LH bearing retainer set bolt
Differential carrier cover set bolt
Torque converter mounting bolt
Differential RH retainer set bolt (A540E)
Transfer set bolt (A540H)
SSM (SPECIAL SERVICE MATERIALS)
RECOMMENDED TOOL
EQUIPMENT
AT-12- AUTOMATIC TRANSAXLEPreparation
Oil pump x Cover
Ring gear x Differential case
Ring bearing retainer x Transmission case
Transmission case x Transaxfe case
Oil pump assembly x Transaxle case
Shift fork x Shaft
Oil pipe X Housing
Transmission case x Transmission case cover
Shift and select lever shaft assembly x
Transmission case
Belicrank x Transmission case
Back±up light switch X Transmission case
Driven pinion x Bearing cage
Ring gear x Ring gear mounting case
Driven pinion cage x Transfer case
Transfer left case x Transfer right case
Transfer left case x Inspection hole cover
Differential lock sleeve x Shift fork
Transfer right case x Transfer case cover
Driven pinion cage x Extension housing
Extension housing x Dynamic damper
Transaxle assembly x Transfer assembly
Differential lock indicator switch X Transfer left case
Output shaft assembly x Lock nut
Transfer left case x Plug (Large)
Transfer left case x Plug (Small)
Transmission case x Plug
Transfer left case X Drain plug
Reverse idler gear retaining bolt
Oil cooler pipe elbow X Transaxle
Oil cooler pipe x Elbow
Specifications (Cont'd)
Adjusting shim thickness (cont'd)
For tooth contact
Torque Specifications
Part tightened
± SERVICE SPECIFICATIONSManual Transaxie (E56F5)A±10
