GM – CAMARO 1982-1992 – Repair Guide (Checked by WxMax) 870
Fig. 2: Steering pump removal; V6
Fig. 3: Steering pump removal; V8
1. Remove the hoses at the pump and tape the openings shut to prevent
contamination. Position the disconnec ted lines in a raised position to
prevent leakage.
2. Remove the pump belt. Remove the pump pulley, as required
3. Loosen the retaining bolts and any braces, and remove the pump.
To install: 4. Install the pump on the engine with the retaining bolt handtight.
5. Connect and tighten the hose fittings.