Page 155 of 681
Action Message
Displays when you disable the hill descent control mode to cool the brake system. Hill Descent Control Off System Cooling
Displays when hill descent control mode is ready. Hill Descent Control Ready
Displays when you activate the hill descent control mode. Hill Descent Control Active
Hill Start Assist
Action Message
Hill start assist is not available. Have the system checked as soon as possible. See Hill Start
Assist (page 274). Hill Start Assist Not Available
Keys and Intelligent Access
Action Message
A reminder to press the brake while starting your vehicle. To START Press Brake
The key is not detected by the system. No Key Detected
The start stop button is pressed to shut off the engine and an intelligent access key is not
detected inside your vehicle. Restart Now or Key is Needed
Your vehicle is in the accessory ignition state. Full Accessory Power Active
152
Information Displays
Page 156 of 681
Action Message
There is a problem with your vehicle’s starting system. Have the system checked as soon as
possible. Starting System Fault
Displays when you successfully program an intelligent access key to the system. Key Program Successful
Displays when you successfully program the maximum number of intelligent access key to
the system. Max Number of Keys Learned
Displays during spare key programming when intelligent access key programming fails. Key Program Failure
Displays during spare key programming when you have not programmed enough keys. Not Enough Keys Learned
Displays when the key battery is low. Change the battery as soon as possible. Key Battery Low Replace Soon
Displays when you switch the vehicle off. Vehicle Switched Off
153
Information Displays
Page 157 of 681

Lane Keeping System
Action Message
Displays when the system requires service. Have the system checked as soon as possible. Lane Keeping Sys. Malfunction Service
Required
Check to make sure there are no objects or debris blocking the camera. Have the system
checked if this condition persists. Front Camera Temporarily Not Available
Clean the windshield to improve visibility and allow the camera to properly operate. Front Camera Low Visibility Clean Screen
Displays when the system requires service. Have the system checked as soon as possible. Front Camera Malfunction Service Required
The system requests that you keep your hands on the steering wheel. Keep Hands on Steering Wheel
Maintenance
Action Message
Stop your vehicle as soon as safely possible and turn off the engine. Check the oil level. If
this message stays on or continues to come on with your engine running, have the system
checked as soon as possible. Low Engine Oil Pressure
The engine oil life is low and needs to be changed soon. See General Maintenance
Information (page 579). Change Engine Oil Soon
The engine oil life is low and needs to be changed immediately. See General Maintenance
Information (page 579). Oil Change Required
154
Information Displays
Page 158 of 681

Action Message
The brake fluid level is low. Have the system checked immediately. See Brake Fluid Check
(page 409). Brake Fluid Level Low
The brake system needs servicing. Stop the vehicle in a safe place. Have the system checked
as soon as possible. Check Brake System
The engine coolant temperature is excessively high. Have the system checked immediately. Engine Coolant Over Temperature
The washer fluid is low and needs to be refilled. Washer Fluid Level Low
Indicates that your vehicle is still in Transport mode. This may not allow some features to
properly operate. Have the system checked as soon as possible. Transport Mode Contact Dealer
Indicates that your vehicle is still in Factory mode. This may not allow some features to
properly operate. Have the system checked as soon as possible. Factory Mode Contact Dealer
Informs the driver that the powertrain needs service due to a powertrain concern. Have the
system checked as soon as possible. See Manual
The engine has reduced power to help reduce high engine temperature. Power Reduced to Lower Engine Temp
The brake system has reduced stopping power. Brake Applied Power Reduced
The motor electronics are overheating. Stop your vehicle as soon as safely possible, turn off
your vehicle and let it cool. If the warning stays on or continues to come on, have the system
checked as soon as possible. Motor Coolant Over Temperature
EV functionality is disabled and the engine is running to maintain oil quality. See Plug-In
Hybrid Vehicle Operation (page 219). Engine ON Due to Low Use Normal Operation
155
Information Displays
Page 159 of 681
MyKey
Action Message
You cannot program a MyKey. MyKey not Created
MyKey is active. MyKey Active Drive Safely
When switching on your vehicle and MyKey is in use, displays that the MyKey speed limit is
on. Speed Limited to XX MPH/km/h
MyKey is in use and the MyKey speed limit is on and the vehicle speed is approaching 80 mph
(130 km/h). Near Vehicle Top Speed
You have reached the speed limit set for your MyKey. Vehicle at Top Speed of MyKey Setting
You have an active MyKey with a programmed set speed limit. Check Speed Drive Safely
Belt-Minder turns on with a MyKey in use. Buckle Up to Unmute Audio
With a MyKey in use, AdvanceTrac turns on. AdvanceTrac On - MyKey Setting
With a MyKey in use, traction control turns on. Traction Control On - MyKey Setting
With a MyKey in use, park aid is always on. MyKey Park Aid Cannot be Deactivated
With a MyKey in use, lane keeping alert turns on. Lane Keeping Alert On MyKey Setting
156
Information Displays
Page 160 of 681

Park Aid
Action Message
The system requires service. Have the system checked as soon as possible. Check Front Park Aid
The system requires service. Have the system checked as soon as possible. Check Rear Park Aid
The radar is blocked due to inclement weather, ice, mud or water in front of radar. You can
typically clean the sensor to resolve. See Rear Parking Aid (page 286). Rear Park Aid Not Available Sensor Blocked
See Manual
The radar is blocked due to inclement weather, ice, mud or water in front of radar. You can
typically clean the sensor to resolve. See Front Parking Aid (page 288). Front Park Aid Not Available Sensor Blocked
See Manual
The radar is blocked due to inclement weather, ice, mud or water in front of radar. You can
typically clean the sensor to resolve. See Principle of Operation (page 286). Park Aid Not Available Sensor Blocked See
Manual
Displays the park aid status. Front Park Aid On Off
Displays the park aid status. Rear Park Aid On Off
157
Information Displays
Page 161 of 681

Park Brake
Action Message
The parking brake is set, the engine is running and you drive your vehicle more than 3 mph
(5 km/h). If the warning stays on after the parking brake is released, have the system checked
as soon as possible. Park Brake Engaged
The electric parking brake is set and a manual release is attempted without the brake pedal
being pressed. To Release: Press Brake and Switch
The electric parking brake is set and an automatic release is attempted but cannot be
performed. Perform a manual release. Park Brake Use Switch to Release
The electric parking brake is set and your vehicle speed exceeds 3 mph (5 km/h). Release
park brake before continued driving. Release Park Brake
The electric parking brake is not fully applied. Park Brake Not Applied
The electric parking brake is not fully released. Park Brake Not Released
The electric parking brake system has been put into a special mode to allow service of the
rear brakes. Have the system checked as soon as possible. Park Brake Maintenance Mode
158
Information Displays
Page 162 of 681

Action Message
The electric park brake system has detected a condition that requires service. Some function-
ality may still be available. Have the system checked as soon as possible. Park Brake Limited Function Service Required
The electric parking brake system has detected a condition that requires service. Have the
system checked as soon as possible. Park Brake Malfunction Service Now
Applying the electric parking brake numerous times has overheated the system. Wait two
minutes before attempting to apply again. Park Brake System Overheated
Power Steering
Action Message
The power steering system has detected a condition that requires service. Have the system
checked as soon as possible. Steering Fault Service Now
The power steering system is not working. Stop your vehicle in a safe place. Have the system
checked as soon as possible. Steering Loss Stop Safely
The power steering system has detected a condition within the power steering system or
passive entry or passive start system that requires service. Have the system checked as soon
as possible. Steering Assist Fault Service Required
The steering lock system has detected a condition that requires service. Have the system
checked as soon as possible. Steering Lock Malfunction Service Now
159
Information Displays