2022 TOYOTA RAV4 PLUG-IN HYBRID Owners Manual

575
9 9-2. Customization
Vehicle specifications
*1: If equipped
*2: The operation buzzer that sounds when the back door begins to operate cannot
be turned off. (P.211)
*3: The open position is set by the power back door switch. (P.220)
*4: When the towing hitch is installed, Hands Free Power Back Door does not work.
QDriving position memory* (P.229)
*: If equipped
switch of the wireless
remote control operationOff
One short press
––OPush twice
Press and hold
Operation buzzer volume31–O–2
Operation buzzer while the back
door is operating
*2OffOn––O
Opening angle51 to 4–O–User setting*3
Power back door open operation
when the back door opener
switch is pressed
OnOff––O
Back door closing assistOnOff––O
Hands Free Power Back Door*1,
4OnOff–OO
FunctionDefault
settingCustomized
setting
Selection the door linking driving
position memory with door
unlock operation
Driver’s doorAll doors––O
Function to prevent contact
between the head restraint and
ceiling (while moving to memory
location)
OnOff––O
FunctionDefault
settingCustomized
settingABC
ABC

5769-2. Customization
QOutside rear view mirrors (P.245)
QPower windows and panoramic moon roof* (P.247, 250)
*: If equipped
QLights (P.288)
QAutomatic light control system (P.288)
FunctionDefault
settingCustomized
setting
Automatic folding and extend-
ing operationLinked to lock-
ing/unlocking of
the doorsOff
––OLinked to power
switch operation
FunctionDefault
settingCustomized
setting
Key linked operation (open)OffOn––O
Key linked operation (close)OffOn––O
Wireless remote control linked
operation (open)OffOn––O
Wireless remote control linked
operation (close)OffOn––O
Wireless remote control linked
operation signal (buzzer)OnOff––O
Side windows open warning
functionOnOff––O
Sliding roof open warning func-
tion OnOff––O
FunctionDefault
settingCustomized
setting
Light reminder buzzerOnOff––O
FunctionDefault
settingCustomized
setting
Light sensor sensitivityStandard–2 to 2O–O
ABC
ABC
ABC
ABC

577
9 9-2. Customization
Vehicle specifications
QRear window wiper (P.296)
QPCS (Pre-Collision System)*1 (P.311)
*1: If equipped
*2: The system is automatically enabled each time the power switch is turned to ON.
QLTA (Lane Tracing Assist)* (P.318)
*: If equipped
Time elapsed before the head-
lights turn off (Extended Head-
light Lighting)
30 seconds
60 seconds
––O90 seconds
120 seconds
FunctionDefault
settingCustomized
setting
Back door opening linked rear
window wiper stop functionOffOn––O
Washer linked rear window
wiper operationOnOff––O
Shift position linked rear window
wiper operation (P.297)Only onceOff––OContinuous
FunctionCustomized setting
PCS (Pre-Collision System)*2On, Off–O–
Adjust alert timingEarly, Middle, Late–O–
FunctionCustomized setting
Lane centering functionOn, Off–O–
Steering assist functionOn, Off–O–
Alert typeSteering wheel vibration, Buzzer–O–
Alert sensitivityHigh, Standard–O–
Vehicle sway warning functionOn, Off–O–
Vehicle sway warning sensitivityHigh, Standard, Low–O–
FunctionDefault
settingCustomized
settingABC
ABC
ABC
ABC

5789-2. Customization
QRSA (Road Sign Assist)*1 (P.328)
*1: If equipped
*2: RSA function becomes on when the power switch is turned to ON.
*3: If a Speed limit with supplemental mark is exceeded, the notification buzzer does
not operate.
*4: Vehicles with navigation system
QDynamic radar cruise control with full-speed range* (P.332)
*: If equipped
QBSM (Blind Spot Monitor)* (P.349)
FunctionCustomized setting
RSA (Road Sign Assist)*2On, Off–O–
Excess speed notification
method
*3No notification, Display only, Dis-
play and buzzer–O–
Excess speed notification level2 km/h (1 mph), 5 km/h (3 mph),
10 km/h (5 mph)–O–
No-overtaking notification
methodNo notification, Display only, Dis-
play and steering wheel vibration–O–
Other notifications method (No-
entry notification)
*4No notification, Display only, Dis-
play and buzzer–O–
FunctionCustomized setting
Dynamic Radar Cruise Control
with Road Sign Assist
*On, Off–O–
FunctionDefault
settingCustomized
setting
BSM (Blind Spot Monitor)OnOff–O–
Outside rear view mirror indica-
tor brightnessBrightDim–O–
Alert timing for presence of
approaching vehicle (sensitivity)Intermediate
Early
–O–
Late
Only when vehi-
cle detected in
blind spot
ABC
ABC
ABC

579
9 9-2. Customization
Vehicle specifications
*: If equipped
QRCTA (Rear crossing traffic alert) function*1 (P.349)
*1: If equipped
*2: This setting is linked with the buzzer volume of the Toyota parking assist-sensor.
QToyota parking assist-sensor*1 (P.371)
*1: If equipped
*2: This setting is linked with the buzzer volume of the RCTA (Rear crossing traffic
alert) function.
QPKSB (Parking Support Brake)* (P.379)
*: If equipped
QAutomatic air conditioning system (P.406)
FunctionDefault
settingCustomized
setting
RCTA (Rear crossing traffic
alert) functionOnOff–O–
Buzzer volume*2Level 2Level 1–O–Level 3
FunctionDefault
settingCustomized
setting
Toyota parking assist-sensorOnOff–OO
Buzzer volume*221–OO3
FunctionDefault
settingCustomized
setting
PKSB (Parking Support Brake)
functionOnOff–O–
FunctionDefault
settingCustomized
setting
Switching between outside air
and recirculated air mode linked
to “AUTO” switch operation
OnOffO–O
ABC
ABC
ABC
ABC

5809-2. Customization
QSeat ventilators* (P.416)
*: If equipped
QRemote Air Conditioning System (P.414)
QIllumination (P.419)
A/C Auto switch operationOnOffO–O
Switching to the outside air
mode when the vehicle is
parked
OnOff––O
FunctionDefault
settingCustomized
setting
Blower levelNormalDecrease––O
FunctionDefault
settingCustomized
setting
Operation using the “A/C” button
on the wireless remote controlPress and hold
(short)
Press once
––O
Press twice
Press and hold
(long)
Off
Stopping operation using the
“A/C” button on the wireless
remote control
Press twice
Press once
––O
Press and hold
(short)
Press and hold
(long)
Off
FunctionDefault
settingCustomized
setting
Time elapsed before the interior
lights turn off15 seconds
Off
O–O7.5 seconds
30 seconds
FunctionDefault
settingCustomized
settingABC
ABC
ABC
ABC

581
9 9-2. Customization
Vehicle specifications
*: If equipped
QVehicle customization
OWhen the speed linked door locking function and shift position linked door locking
function are both on, the door lock operates as follows.
• If the vehicle is started with all the doors locked, the speed linked door locking
function would not operate.
• If the vehicle is started with any door unlocked, the speed linked door locking func-
tion will operate.
• When shifting the shift lever to any position other than P, all the doors will be
locked.
OWhen the smart entry & start system is off, the selecting door to unlock cannot be
customized.
OWhen the doors remain closed after unlocking the doors and the automatic door
lock function is activated, the signals will be generated in accordance with the
Operation signal (emergency flashers) settings.
Operation after the power switch
is turned offOnOff––O
Operation when the doors are
unlockedOnOff––O
Operation when you approach
the vehicle with the electronic
key on your person
OnOff––O
Footwell lighting*OnOff––O
FunctionDefault
settingCustomized
settingABC

5829-3. Initialization
9- 3. In it ia li za ti on
*: If equipped
Items to initialize
The following items must be initialized for normal system operation
after such cases as the 12-volt battery being reconnected, or main-
tenance being performed on the vehicle:
List of the items to initialize
ItemWhen to initializeReference
Power back door*• After reconnecting or changing
the 12-volt battery
• After changing a fuse
P.216
Power windows• When functioning abnormallyP.247
Panoramic moon roof*P.251
Tire pressure warning system
• When rotating the tires
• When changing the tire
• After registering the ID codes
P.468
Toyota parking assist monitor*
• After reconnecting or changing
the 12-volt battery
• After changing a fuse
Refer to
“Navigation
and multime-
dia system
Owner’s
manual” or
“Multimedia
Owner’s
Manual”
Panoramic view monitor*