Page 281 of 818

2793-5. Opening and closing the windows
3
Operation of each component
C-HR_HV_OM_Europe_OM10720E
■ When the side window cannot be opened or closed
When the jam protection function or catch protection function o perates
unusually and the side window cannot be opened or closed, perfo rm the fol-
lowing operations with the power window switch of that door.
● Stop the vehicle. With the power switch in ON mode, within 4 seconds of the
jam protection function or catch protection function activating , continuously
operate the power window switch in the one-touch closing direct ion or one-
touch opening direction so that the side window can be opened a nd closed.
● If the side window cannot be opened and closed even when performing the
above operations, perform the following procedure for function initialization.
Turn the power switch to ON mode.
Pull and hold the power window switch in the one-touch closing direction
and completely close the side window.
Release the power window switch for a moment, resume pulling th e
switch in the one-touch closing direction, and hold it there fo r approxi-
mately 6 seconds or more.
Press and hold the power window switch in the one-touch opening direc-
tion. After the side window is completely opened, continue hold ing the
switch for an additional 1 second or more.
Release the power window switch for a moment, resume pushing th e
switch in the one-touch opening direction, and hold it there fo r approxi-
mately 4 seconds or more.
Pull and hold the power window switch in the one-touch closing direction
again. After the side window is completely closed, continue hol ding the
switch for a further 1 second or more.
If you release the switch while the window is moving, start aga in from the
beginning. If the window reverses and cannot be fully closed or opened,
have the vehicle inspected by any authorized Toyota retailer or Toyota
authorized repairer, or any reliable repairer.
1
2
3
4
5
6
Page 282 of 818
2803-5. Opening and closing the windows
C-HR_HV_OM_Europe_OM10720E
■ Door lock linked window operation
● The power windows can be opened and closed using the mechanical key.*
(P. 746)
● The power windows can be opened and closed using the wireless remote
control.* ( P. 194)
*: These settings must be customized at any authorized Toyota retailer or
Toyota authorized repairer, or any reliable repairer.
■ Power window open reminder function
The buzzer sounds and a message is shown on the multi-informati on display
in the instrument cluster when the power switch is turned off a nd the driver’s
door is opened with the power windows open.
■ Customization
Some functions can be changed. ( P. 781)
Page 283 of 818

2813-5. Opening and closing the windows
3
Operation of each component
C-HR_HV_OM_Europe_OM10720E
WARNING
Observe the following precautions.
Failure to do so may result in death or serious injury.
■ Closing the windows
● The driver is responsible for all the power window operations, including the
operation for the passengers. In order to prevent accidental op eration,
especially by a child, do not let a child operate the power win dows. It is
possible for children and other passengers to have body parts c aught in
the power window. Also, when riding with a child, it is recomme nded to use
the window lock switch. ( P. 277)
● When using the wireless remote control or mechanical key (P. 188) and
operating the power windows, operate the power window after che cking to
make sure that there is no possibility of any passenger having any of their
body parts caught in the side window. Also do not let a child o perate side
window by the wireless remote control or mechanical key. It is possible for
children and other passengers to get caught in the power window .
● When exiting the vehicle, turn the power switch off, carry the key and exit
the vehicle along with the child. There may be accidental opera tion, due to
mischief, etc., that may possibly lead to an accident.
● Check to make sure that all passengers
do not have any part of their body in a
position where it could be caught when
a side window is being operated.
Page 284 of 818
2823-5. Opening and closing the windows
C-HR_HV_OM_Europe_OM10720E
WARNING
Observe the following precautions.
Failure to do so may result in death or serious injury.
■ Jam protection function
● Never use any part of your body to intentionally activate the jam protection
function.
● The jam protection function may not work if something gets jammed just
before the side window is fully closed. Be careful not to get a ny part of
your body jammed in the side window.
■ Catch protection function
● Never use any part of your body or clothing to intentionally activate the
catch protection function.
● The catch protection function may not work if something gets caught just
before the side window is fully opened. Be careful not to get a ny part of
your body or clothing caught in the side window.
Page 285 of 818

283
4Driving
C-HR_HV_OM_Europe_OM10720E
4-1. Before driving
Driving the vehicle ............. 284
Cargo and luggage ............ 295
Trailer towing ..................... 296
4-2. Driving procedures
Power (ignition) switch ....... 305
EV drive mode ................... 312
Hybrid transmission
(2ZR-FXE engine) ........... 315
Hybrid transmission
(M20A-FXS engine) ......... 319
Turn signal lever ................ 324
Parking brake .................... 325
Brake Hold ......................... 330
4-3. Operating the
lights and wipers
Headlight switch ................ 333
Automatic High Beam ........ 338
Fog light switch .................. 343
Windshield wipers and
washer ............................. 345
Rear window wiper and
washer ............................. 348
4-4. Refueling
Opening the
fuel tank cap .................... 350
4-5. Using the driving support
systems
Toyota Safety Sense ......... 355
PCS
(Pre-Collision System) ..... 369
LTA
(Lane Tracing Assist)....... 387
RSA (Road Sign Assist)..... 402
Dynamic radar cruise
control with
full-speed range ............... 410
Cruise control..................... 427
Driving mode select ........... 432
Speed limiter ...................... 434
BSM
(Blind Spot Monitor) ......... 437
Toyota parking
assist-sensor ................... 456
RCTA (Rear Crossing
Traffic Alert) ..................... 469
PKSB (Parking Support
Brake) .............................. 477
Parking Support Brake
function (static objects) .... 485
Parking Support Brake
function
(rear-crossing vehicles) ... 489
S-IPA (Simple Intelligent
Parking Assist System).... 492
GPF (Gasoline Particulate
Filter) system .................. 531
Driving assist systems ....... 532
4-6. Driving tips
Hybrid Electric Vehicle
driving tips ....................... 540
Winter driving tips .............. 543
Page 286 of 818
2844-1. Before driving
C-HR_HV_OM_Europe_OM10720E
Driving the vehicle
P. 3 0 5
With the brake pedal depressed, shift the shift lever to D. ( P. 315,
319)
Release the parking brake. ( P. 326)
If the parking brake is in automatic mode, the parking brake is released
automatically when shifting the shift lever to any position oth er than P.
( P. 325)
Gradually release the brake pedal and gently depress the accelera-
tor pedal to accelerate the vehicle.
With the shift lever in D, depress the brake pedal.
If necessary, set the parking brake.
If the vehicle is to be stopped for an extended period of time, shift the shift
lever to P or N. ( P. 315, 319)
The following procedures should be observed to ensure safe
driving:
Starting the hybrid system
Driving
Stopping
1
2
3
1
2
Page 287 of 818
2854-1. Before driving
4
Driving
C-HR_HV_OM_Europe_OM10720E
With the shift lever in D. depress the brake pedal.
Set the parking brake ( P. 326), and shift the shift lever to P
( P. 315, 319).
If parking on a hill, block the wheels as needed.
Press the power switch to stop the hybrid system.
Lock the door, making sure that you have the electronic key on your
person.
With the brake pedal depressed, shift the shift lever to D.
Pull the parking brake switch and parking brake is set manually .
(P. 326)
Release the brake pedal and gently depress the accelerator peda l
to accelerate the vehicle.
Press the parking brake switch and parking brake is released ma n-
ually. (P. 326)
Parking the vehicle
Starting off on a steep uphill
1
2
3
4
1
2
3
4
Page 288 of 818

2864-1. Before driving
C-HR_HV_OM_Europe_OM10720E
■When starting off on a uphill
The hill-start assist control will activate. ( P. 533)
■ For fuel-efficient driving
Keep in mind that Hybrid Electric Vehicles are similar to conve ntional vehi-
cles, and it is necessary to refrain from activities such as su dden accelera-
tion. ( P. 540)
■ Driving in the rain
● Drive carefully when it is raining, because visibility will be reduced, the win-
dows may become fogged-up, and the road will be slippery.
● Drive carefully when it starts to rain, because the road surface will be espe-
cially slippery.
● Refrain from high speeds when driving on an expressway in the rain,
because there may be a layer of water between the tires and the road sur-
face, preventing the steering and brakes from operating properl y.
■ Restraining hybrid system output (Brake Override System)
● When the accelerator and brake pedals are depressed at the same time, the
hybrid system output may be restrained.
● A warning message is displayed on the multi-information display while the
system is operating.
■ Restraining sudden start (Drive-Start Control)
● When the following unusual operation is performed, the hybrid system out-
put may be restrained.
• When the shift lever is shifted from R to D/B, D/B to R, N to R, P to D/B,
or P to R with the accelerator pedal depressed, a warning messa ge
appears on the multi-information display. If a warning message is shown
on the multi-information display, read the message and follow t he instruc-
tion.
• When the accelerator pedal is depressed too much while the veh icle is in
reverse.
●While Drive-Start Control is being activated, your vehicle may have trouble
escaping from the mud or fresh snow. In such case, deactivate T RC (P. 534)
to cancel Drive-Start Control so that the vehicle may become ab le to escape
from the mud or fresh snow.