Page 353 of 457
Ve
hicle identi/cation plate (e xample:Kuwa it)
1 Vehicle manu facturer
2 Place of manufacture
3 Manu facturing date
4 Vehicle model
5 VIN Ve
hicle identi/cation plate (e xample: all other
countries)
1 Vehicle manu facturer
2 EUgeneral ope rating permit number (only for
cer tain countries)
3 VIN (vehicle identi/cation number)
4 Maximum permissible gross vehicle weight
(kg) 5
Maximum permissible gross weight of vehicle
combination (kg) (only for speci/c countries)
6 Maximum permissible front axle load (kg)
7 Maximum permissible rear axle load (kg)
8 Paint code
% The data shown in the illust ration is example
data.
VIN in t
VIN in t he engine com
he engine com par
partment
tment
The VIN can be found on the crossmember in the
engine compartment. Further information can be
obtained at a quali/ed specialist workshop. 350
350
Te
ch nical data
Page 354 of 457

VIN at t
VIN at t
he low
he lower edg
er edg e of t
e of the windscr
he windscr een
een 1
VIN (vehicle identi/cation number) as label
The VIN as a label at the lo wer edge of the wind-
screen is only available in some countries.
Mot
Mot or number
or number
Fu rther information on mo tor numbers can be
obtained at a quali/ed specialist workshop. Oper
Oper
ating
ating 0uids
0uids N
No
ot
tes on oper
es on oper ating
ating0uids
0uids &
W
WARNING
ARNING Risk of injury from operating
0uids harmful toyour health
Operating 0uids may be poisonous and harm-
ful toyour health. #
Obser vethete xt on the original contain-
ers when using, storing or disposing of
operating 0uids. #
Always store operating 0uids sealed in
th eir original containers. #
Alwayske ep children away from operat-
ing 0uids. +
ENVIR ENVIR
ONMENT
ONMENT AL NO
AL NOTE
TEPollution of the
environment due toirre sponsible disposal
of operating 0uids Incor
rect disposal of operating 0uids can
cause considerable damage tothe environ-
ment. #
Dispose of operating 0uids in an environ-
mentally responsible manner. Operating 0uids include
thefo llowing:
R lubricants
R coolant
R brake 0uid
R windscreen washer 0uid
R climate cont rol system refrigerant
Only use products appro vedby Mercedes-Benz.
Damage caused bythe use of products that ha ve
not been app rove d is not co veredby the
Mercedes-Benz warranty or goodwill gestu res.
Yo u can identify operating 0uids appr ovedby
Mercedes-Benz bythefo llowing inscriptions on
th e container:
R MB-F reigabe (e.g. MB-F reigabe 229.51)
R MB-Appr oval (e.g. MB -Appr oval 229.51) Te
ch nical data
351 351
Page 355 of 457

Fu
rther information on appr oved operating 0uids
is available at thefo llowing locations:
R inthe Mercedes-Benz Speci/cations for Oper-
ating Fluids byentering the designation
- at https://be vo.mercedes-benz.com
- inthe Mercedes-Benz BeVo App
R at a quali/ed specialist workshop N
No
ot
tes on br
es on br ak
ake
e0uid
0uid No
tethe inst ructions about operating 0uids
(/ page 351). &
W
WARNING
ARNING Risk of an accident due to
va pour poc kets form ing in the brake sys-
tem
The brake 0uid constantly absorbs moisture
from the air. This lo wersthe boiling point of
th e brake 0uid. If the boiling point is too lo w,
va pour poc kets may form inthe brake system
when the brakes are applied hard.
This impairs the braking e.ect. #
Have the brake 0uid rene we d at the
speci/ed inter vals. Ha
ve the brake 0uid regula rly re placed at a quali-
/ed specialist workshop.
Only use a brake 0uid appr ovedby Mercedes-
Benz according toMB-F reigabe or MB-Appr oval
331.0. Coolant
Coolant
N
No
ot
tes on coolant
es on coolant
Obser vethe no tes on operating 0uids
(/ page 351). &
W
WARNING
ARNING Risk of /re‑ and injury from
antif reeze
If antifreeze comes into contact with hot com-
ponent parts in the engine compartment, it
may ignite. #
Allow the drive system tocool down
before youto p up the antifreeze. #
Make sure that no antif reeze spills out
next tothe /ller opening. #
Thoroughly clean the antifreeze from
component parts before starting the
ve hicle. *
N
NOOTE
TE Damage caused byincor rect cool-
ant #
Only use coolant that has been premixed
with there qu ired antifreeze pr otection.
Information on coolant is available at thefo l-
lowing locations:
R Inthe Mercedes-Benz Speci/cation for
Operating Fluids 320.1
- Athttps://be vo.mercedes-benz.com
- Inthe Mercedes-Benz BeVo App
R Ataqu ali/ed specialist workshop *
N NOOTE
TE Overheating at high outside temp er-
atures If an inappropriate coolant is used,
the engine
cooling system is not su1ciently pr otected
against overheating and cor rosion at high out-
side temp eratures. 352
352
Te
ch nical data
Page 356 of 457

#
Only use coolant appr ovedby Mercedes-
Benz. #
Obser vethe inst ructions in the
Mercedes-Benz Speci/cations for Oper-
ating Fluids 320.1. Ha
ve the coolant regula rly re placed at a quali/ed
specialist workshop.
Proportion of antif reeze concentrate in the engine
cooling system:
R A minimum of 50% (antifreeze pr otection down
to about -37°C)
R A maximum of 55% (antif reeze pr otection
down to-45°C) N
No ot
tes on windscr
es on windscr een w
een washer
asher 0uid
0uid Obser
vethe no tes on operating 0uids
(/ page 351). &
W
WARNING
ARNING Risk of /re and injury from
windscreen washer concent rate
Wi ndsc reen washer concent rate is highly 0am-
mable. If it comes into contact with hot com-
ponents, it may ignite. #
Make sure that windscreen washer con-
cent rate is not spilled near tothe /ller
opening. *
N NOOTE
TE Damage totheex terior lighting due
to unsuitable windscreen washer 0uid Unsuitable windscreen
washer 0uids may
damage the plastic sur face of theex terior
lighting. #
Only use windscreen washer 0uids which
are also suitable for use on plastic sur fa-
ces, e.g. MB SummerFit or MB WinterFit. *
N
NOOTE
TE Bloc ked spr aynozzles caused by
mixing windscreen washer 0uids #
Do not mix MB SummerFit and MB Win-
te rFit with other windscreen washer 0u-
ids. Do not use distilled or de-ionised
water. Other-
wise, the /ll le vel sensor may be triggered er rone-
ous ly.
Re commended windscreen washer 0uid:
R abo vefreezing point: e.g. MB SummerFit
R below freezing point: e.g. MB WinterFit
Fo rth e cor rect mixing ratio, referto the informa-
tion on the antifreeze container.
Mix washer 0uid with windscreen washer 0uid all
ye ar round. Te
ch nical data
353
353
Page 357 of 457

V
V
ehicle data
ehicle data V
V
ehicle dimensions
ehicle dimensions The heights speci/ed may
vary as a result of the
fo llowing factors:
R tyres
R load
R condition of the suspension
R optional equipment Height when opened and headr
Height when opened and headr
oom
oom Model
Model
1
1
Height
Height when
when
opened
opened 2
2
Head-
Head-
r
r oom
oom
All models 2134 mm 1917 mm V V
ehicle dimensions ehicle dimensions All models All models
Ve
hicle lengt h4 463 mm
Ve hicle width including
outside mir rors 2020 mm
Ve hicle width exclud-
ing outside mir rors 1834 mm
Ve hicle height 1624 mm
Wheelbase 2729 mm W W
eights and loads
eights and loads Please obser
vethefo llowing no tesfo rth e speci-
/ed vehicle data:
R Items of optional equipment increase the unla-
den weight and reduce the pa yload.
R Vehicle-speci/c weight information can be
fo und on theve hicle identi/cation plate
(/ page 349).
R
R oof load
oof load Model
Model
Maximum r
Maximum roof load
oof load
All model s7 5 kg High-v
High-v
olt
oltag
age batt
e batt ery
ery N
No
ot
tes on t
es on t he pow
he pow er suppl
er suppl y f
y for v
or v ehicles wit
ehicles wit h a
h a
high-v
high-v olt
oltag
age batt
e batt ery
ery
In accordance with European standard EN
17186:2019, vehicle identi/ers are located on the
ve hicle in thefo llowing places:
R Onthe inside of the soc ket 0ap
R Onthech arging cable connector 354 354
Te
ch nical data
Page 358 of 457

Charging stations in European countries are also
equipped with energy supply identi/ers.
You can
re ch arge your vehicle at charging stations where
th ech arging station identi/er cor responds tothe
ve hicle identi/er.
Fo r fur ther information on charging the high-volt-
age batter y,referto the "Charging the high-volt-
age battery" section (/ page 163).1
Supply type: AC
St andard: EN 62196-2
St yle: type 2
Plug type: charging cable soc ket and vehicle
plug
Vo ltage range: 480 V RMS 2
Supply type: DC
Standard: EN 62196-3
St yle: FF
Plug type: charging cable soc ket and vehicle
plug
Vo ltage range: 50 V to500 V
3 Supply type: DC
Standard: EN 62196-3
St yle: FF
Plug type: charging cable soc ket and vehicle
plug
Vo ltage range: 200 V to920 V
Missing values werenot available at the time of
going topress.
Ener
Ener gy cont gy cont ent and c
ent and c har
harging time (EQA 250+)
ging time (EQA 250+) EQA 250+
EQA 250+
Ty
pe Lithium-ion
Usable energy content 70.5 kWh
Ra nge EQA 250+ EQA 250+
Cha
rge time – mode 4
with appr ox. 100 kW charging
capacity App
rox. 30
min
Char getime – mode 3
with 11 kW charging capacity
(depending on the condition of
th eve hicle body) App
rox. 5 h
45 min
Char getime – mode 2
with 3.7 kW charging capacity App
rox. 18 h
15 min
Char getime – mode 2
with 2.3 kW charging capacity App
rox. 30 h Ener Ener
gy cont
gy cont ent and c
ent and c har
harging time (all ot
ging time (all other mod-
her mod-
els)
els) All
ot
All other models
her models
Ty pe Lithium-ion
Usable energy content 66.5 kWh
Ra nge Te
ch nical data
355
355
Page 359 of 457

All
ot
All other models
her models
Char getime – mode 4
with app rox. 100 kW charging
capacity App
rox. 30
min
Char getime – mode 3
with 11 kW charging capacity
(depending on the condition of
th eve hicle body) App
rox. 5 h
45 min
Char getime – mode 2
with 3.7 kW charging capacity App
rox. 18 h
15 min
Char getime – mode 2
with 2.3 kW charging capacity App
rox. 30 h Charging times – modes 2 and 3 apply
toAC
ch arging from 10% to100% of the usable energy
content.
Charging time – mode 4 applies toDC charging
from 10% to80% of the usable energy content.
The time take nto charge the battery depends on
th ech arge status of the batter y,the ambient tem-
perature and thech arging capacity of the batter y.The
charging capacit y,in turn, depends on the
supply voltage, the cur rent intensity and the type
of po wer suppl y.
The nominal voltage range foryo ur vehicle can be
fo und on the information label in the soc ket co ver
( / page 163). T T
r
railer hitch
ailer hitch Gener
Gener
al not
al notes on t
es on t he tr
he trailer hitch
ailer hitch Modi/cations
tothe engine cooling system may
be necessar y,depending on theve hicle model.
The retro/tting of a trailer hitch is on lypermissi-
ble if a towing capacity is speci/ed in your vehicle
documents.
Fu rther information can be obtained at a quali/ed
specialist workshop. Mounting dimensions of t Mounting dimensions of t
he tr
he tr ailer hitch
ailer hitch 1
Fastening points
2 Overhang dimension
3 Rear axle cent reline 356
356
Te
ch nical data
Page 360 of 457

The
overhang dimension and fastening points are
va lid for a trailer hitch installed at thefa ctor y.
Ov
Ov er
erhang dimension leng th
hang dimension length Model Model
2 2Ov
Over
erhang
hang
dimension
dimension
All model s9 45 mmT
T
o
o wing capacity
wing capacity %
The tongue weight is not included in theto w-
ing capacity.
The values forth e trtrailer load, br ailer load, br ak
aked
ed apply
with a minimum start-o. gradeability of 12%.
To
To wing capacity
wing capacity , br
, brak
aked
ed Model
Model
All model
s1 800 kgT T
o
o wing capacity
wing capacity , unbr
, unbrak
aked
ed Model
Model
All models
750 kg Maximum t Maximum t
ongue w
ongue w eight and load capacity
eight and load capacity *
N
NOOTE
TE Damage caused bythe trailer com-
ing loose If
th eto ngue weight used is too lo w,the trailer
may come loose. #
The tongue weight must not be below
50 kg. #
Use a tongue weight that is as close as
possible tothe maximum permissible
to ngue weight. *
N
NOOTE
TE Damage caused bythe bicycle rack
coming loose When using a bicycle
rack , bo th th e maximal
to ngue weight and the maximal load capacity
should be obser ved. #
Do not exceed the permissible load
capacity. Obser
vethe additional no tes on load capacity
(/ page 241). T
T
ongue w
ongue w eight
eight Model
Model
Maximum t
Maximum tongue
ongue
w
w eight
eight
All model s8 0 kg Load capacity
Load capacity
All models
All models
Maximum load
Maximum load
When attaching the
bicycle rack tothe ball
head 75 kg
When attaching the
bicycle rack tothe ball
head and additionally
to the guide pin 100 kg P P
er
er missible r
missible r ear axle load (tr
ear axle load (tr ailer oper
ailer operation)
ation) T
T
r
railer oper
ailer oper ation axle load
ation axle load Model
Model
Axle load
Axle load
All models 1465 kg Te
ch nical data
357
357