2019 MAZDA MODEL 2 Owners Manual (in English)

 /LIWWKHERQQHWJUDVSWKHSDGGHGDUHD
RQWKHVXSSRUWURGDQGVHFXUHWKH
VXSSRUWURGLQWKHFOLS9HULI\WKDWWKH
VXSSRUWURGLVVHFXUHGLQWKHFOLS
EHIRUHFORVLQJWKHERQQHW

Clip
ClipClip
 /RZHUWKHERQQHWVORZO\WRDKHLJKWRI
DERXWFPLQDERYHLWVFORVHG
SRVLWLRQDQGWKHQOHWLWGURS
&$87,21
When closing the bonnet, do not push it
excessively such as by applying your
weight. Otherwise, the bonnet could be
deformed.
0DLQWHQDQFHDQG&DUH
2ZQHU0DLQWHQDQFH


(QJLQH&RPSDUWPHQW2YHUYLHZ
Windscreen washer fluid reservoir Brake/Clutch fluid reservoir
Engine oil dipstick Battery
Fuse block
Cooling system capEngine coolant reservoirEngine oil-filler cap SKYACTIV-G 1.3 and SKYACTIV-G 1.5
0DLQWHQDQFHDQG&DUH
2ZQHU0DLQWHQDQFH


Windscreen washer fluid reservoir
Brake fluid reservoirEngine oil-dipstick
BatteryFuse block
Cooling system cap
Engine coolant reservoirEngine oil-filler cap SKYACTIV-D 1.5
0DLQWHQDQFHDQG&DUH
2ZQHU0DLQWHQDQFH


(QJLQH2LO
NOTE
Changing the engine oil should be done by an expert repairer (we recommend an
Authorised Mazda Repairer).
▼5HFRPPHQGHG2LO
,QRUGHUWRNHHSWKHPDLQWHQDQFHLQWHUYDOSDJHDQGWRSURWHFWWKHHQJLQHIURPGDPDJH
FDXVHGE\SRRUOXEULFDWLRQLWLVYLWDOO\LPSRUWDQWWRPDNHXVHRIHQJLQHRLOZLWKWKHFRUUHFW
VSHFLILFDWLRQ'RQRWXVHRLOVZKLFKGRQRWPHHWWKHIROORZLQJVSHFLILFDWLRQVRU
UHTXLUHPHQWV8VHRIXQVXLWDEOHRLOPD\OHDGWRHQJLQHGDPDJHZKLFKLVQRWFRYHUHGE\WKH
0D]GD:DUUDQW\

Temperature Range SAE Viscosity Numbers
Mazda Original Oil Ultra 5W-30
API SN or ACEA A5/B5 Mazda Original Oil Supra 0W-20
Alternative Oil QualityRecommended oils
–30 –20 –10 0
1020 30
40
–200
2040
60
80100
–40
–40
Grade
5W-30 0W-20
Europe and Taiwan
*1 Use API SM/SN in Kazakhstan.
*1
0DLQWHQDQFHDQG&DUH
2ZQHU0DLQWHQDQFH


Grade
API SG/SH/SJ/SL/SM/SN or
ILSAC GF-II/GF-III/GF-IV/GF-V
(SKYACTIV-G 1.3 and SKYACTIV-G 1.5)
Temperature Range SAE Viscosity Numbers
–30 –20 –10 0
1020 30
40
–200
2040
60
80100
–40
–40
Except Europe and Taiwan
GradeTemperature Range SAE Viscosity Numbers
ACEA C3
–30 –20 –10 0
1020 30
40
–200
2040
60
80100
–40
–40
(SKYACTIV-D 1.5)
(QJLQHRLOYLVFRVLW\RUWKLFNQHVVKDVDQHIIHFWRQIXHOHFRQRP\DQGFROGZHDWKHURSHUDWLRQ
VWDUWLQJDQGRLOIORZ
/RZYLVFRVLW\HQJLQHRLOVFDQSURYLGHLPSURYHGIXHOHFRQRP\DQGFROGZHDWKHU
SHUIRUPDQFH

:KHQFKRRVLQJDQRLOFRQVLGHUWKHWHPSHUDWXUHUDQJH\RXUYHKLFOHZLOORSHUDWHLQEHIRUH
WKHQH[WRLOFKDQJH
7KHQVHOHFWWKHUHFRPPHQGHGYLVFRVLW\IURPWKHFKDUW
0DLQWHQDQFHDQG&DUH
2ZQHU0DLQWHQDQFH


&$87,21
¾Using oils of viscosity besides those recommended for
specific temperature ranges could
result in engine damage.
¾(SKYACTIV-D 1.5)
SKYACTIV-D 1.5 uses specified oil. Please confirm the specification in owner's manual. If
engine oil other than the
specified oil is used, the Diesel Particulate Filter
effective period of
use will be shortened or the Diesel Particulate Filter may be damaged.
NOTE
(SKYACTIV-G 1.3 and SKYACTIV-G 1.5)
xIt is normal for all engines to consume engine oil under normal driving conditions.
Engine oil consumption may be as high as 0.8 L/1,000 km (1 L/800 miles). This may be as
a result of evaporation, internal ventilation or burning of the lubricating oil in the
working engine. Oil consumption may be higher when the engine is new due to the
running-in process. Oil consumption is also dependant on engine speed and engine load.
Under extreme driving conditions, oil consumption may be higher.
(SKYACTIV-D 1.5)
xInspect the engine oil level periodically. When inspecting the engine oil, if the engine oil
level is exceeds the “X” mark on the dipstick, replace the engine oil. This should be done
by an expert repairer (we recommend an Authorised Mazda Repairer). When replacing
the engine oil, inspect the oil level using the oil dipstick and refill so that the engine oil
level is within the range between MIN and MAX as shown in the figure.

X Mark MAX MIN
xWhenever the engine oil is replaced, the vehicles engine control unit needs to be reset as
soon as possible. Otherwise the wrench indicator light or engine oil warning light may
turn on. To reset the engine control unit, consult an expert repairer (we recommend an
Authorised Mazda Repairer) or refer to the vehicle engine control unit reset procedure on
page 6-27.
0DLQWHQDQFHDQG&DUH
2ZQHU0DLQWHQDQFH


▼9HKLFOH(QJLQH&RQWURO8QLW5HVHW3URFHGXUH
NOTE
This procedure is intended for vehicles with SKYACTIV-D 1.5 and vehicles with
SKYACTIV-G 1.3 or SKYACTIV-G 1.5 which the engine oil flexible maintenance setting is
selected.
$IWHUUHSODFLQJWKHHQJLQHRLOKDYHDUHSDLUVKRSVXFKDVDQ$XWKRULVHG0D]GD5HSDLUHU
SHUIRUPWKHLQLWLDOL]DWLRQHQJLQHRLOGDWDUHVHWWLQJRIWKHUHFRUGHGYDOXH,IWKHYDOXH
UHFRUGHGE\WKHFRPSXWHULVQRWLQLWLDOL]HGWKHZUHQFKLQGLFDWRUOLJKWPD\QRWWXUQRIIRULW
PD\WXUQRQHDUOLHUWKDQQRUPDO
NOTE
The initialization (engine oil data resetting) of the recorded value can be performed using
the following procedure:
1. Switch the ignition OFF.
2. Switch the ignition ON with the selector pressed and continue pressing the selector for
about 5 seconds until the master warning light
flashes.

Selector
3. After the master warning light flashes for several seconds, the initialization is
completed.
0DLQWHQDQFHDQG&DUH
2ZQHU0DLQWHQDQFH


▼,QVSHFWLQJ(QJLQH2LO/HYHO
 %HVXUHWKHYHKLFOHLVRQDOHYHO
VXUIDFH
 :DUPXSWKHHQJLQHWRQRUPDO
RSHUDWLQJWHPSHUDWXUH
 7XUQLWRIIDQGZDLWDWOHDVWPLQXWHV
IRUWKHRLOWRUHWXUQWRWKHVXPS
 3XOORXWWKHGLSVWLFNZLSHLWFOHDQDQG
UHLQVHUWLWIXOO\
6.<$&7,9*DQG
6.<$&7,9*

MAX
MINOK
6.<$&7,9'

MAX
OK
MIN X Mark
NOTE
(SKYACTIV-D 1.5)
When inspecting the engine oil level,
pull out the dipstick straight without
twisting. In addition, when inserting
the dipstick, always insert it without
twisting so that the “X” mark faces the
front of the vehicle.
 3XOOLWRXWDJDLQDQGH[DPLQHWKHOHYHO
7KHOHYHOLVQRUPDOLILWLVEHWZHHQWKH
0,1DQG0$;PDUNV
,ILWLVQHDURUEHORZ0,1DGGHQRXJK
RLOWREULQJWKHOHYHOWR0$;
&$87,21
Do not overfill the engine oil. This may
cause engine damage.
 0DNHVXUHWKH2ULQJRQWKHGLSVWLFNLV
SRVLWLRQHGSURSHUO\EHIRUHUHLQVHUWLQJ
WKHGLSVWLFN
 5HLQVHUWWKHGLSVWLFNIXOO\
0DLQWHQDQFHDQG&DUH
2ZQHU0DLQWHQDQFH