Page 537 of 632
5377-2. Steps to take in an emergency
LX570_OM_OM60R07U_(U) 7
When trouble arises Remove the cover.
Unhook the rubber band and take
out the jack.
Loosen
Tighten
Loosen and remove the jack.
Remove the cover.
Take out the tool box.Taking out the jack 1
2
1
2
Taking out the tool box 1
2
Page 538 of 632
538 7-2. Steps to take in an emergency
LX570_OM_OM60R07U_(U) Assembling the jack handle. Remove the jack handle and the jack extens ion bar from the tool box and assemble by
following these steps.
Loosen the screw using a screw-
driver.
Assemble the jack handle and the
jack handle extension bar and
tighten the screw. Check that the screw is firmly tight-
ened.
Open the cover.
Insert the jack handle extension into
the lowering screw.
Lower
Raise Place a rag under the jack handle
extension to protect the back door.Taking out the spare tire 1
1
2
2
3
1
2
Page 539 of 632
5397-2. Steps to take in an emergency
LX570_OM_OM60R07U_(U) 7
When trouble arises Lower the spare tire completely to
the ground.
Pull out the spare tire and remove
the holding bracket and spare wheel
cover.
Chock the tires. 4
5
Replacing a flat tire 1
Flat tire Wheel chock positions
Front Left-hand side Behind the rear right-hand side tire
Right-hand side Behind the rear left-hand side tire
Rear Left-hand side In front of the front right-hand side tire
Right-hand side In front of the front left-hand side tire
Page 540 of 632
540 7-2. Steps to take in an emergency
LX570_OM_OM60R07U_(U) 21-inch tires: Pry off the wheel orna-
ment, using the beveled end of the
wheel ornament remover as shown.
Slightly loosen the wheel nuts (one
turn).
Assembling the jack handle. Remove the jack handle, jack extension bar and jack handle bar from the tool box and
assemble by following these steps.
Loosen the bolts and the screw
using either the jack handle or a
screwdriver.
Assemble the jack handle exten-
sion bar and the jack handle bar
and tighten the bolts. Check that the bolts are firmly tight-
ened. 2
3
4
1
2
Page 541 of 632
5417-2. Steps to take in an emergency
LX570_OM_OM60R07U_(U) 7
When trouble arises Assemble the jack handle exten-
sion bar and the jack handle and
tighten the screw. Check that the screw is firmly tight-
ened.
Position the jack at the jack points as
shown.
Front
Under the chassis frame side rail
Rear
Under the rear axle housing
Raise the vehicle until the tire is
slightly raised off the ground. 3
5
1
2
6
Page 542 of 632

542 7-2. Steps to take in an emergency
LX570_OM_OM60R07U_(U) Remove all the wheel nuts and the
tire. When resting the tire on the ground,
place the tire so that the wheel design
faces up to avoid scratching the wheel
surface. 7
WARNING ■
Replacing a flat tire ●
Observe the following precautions.
Failure to do so may result in serious injury:
• Lower the spare tire completely to the ground before removing it from under the
vehicle.
• Do not try to remove the wheel ornament by hand. Take due care in handling the
ornament to avoid unexpected personal injury.
• Do not touch the disc wheels or the area around the brakes immediately after the
vehicle has been driven.
After the vehicle has been driven the disc wheels and the area around the brakes
will be extremely hot. Touching these areas with hands, feet or other body parts
while changing a tire, etc. may result in burns.
• Turn off the vehicle height control.
The vehicle height may change due to th e automatic leveling function and you may
catch part of your body in the ve hicle, resulting in an accident. ( P. 301)●
Failure to follow these precautions could cau se the wheel nuts to loosen and the tire
to fall off, resulting in death or serious injury.
• Never use oil or grease on the wheel bolts or wheel nuts.
Oil and grease may cause the wheel nuts to be excessively tightened, leading to
bolt or disc wheel damage. In addition, the oil or grease can cause the wheel nuts
to loosen and the wheel may fall off, causing a serious accident. Remove any oil or
grease from the wheel bolts or wheel nuts.
• Have the wheel nuts tightened with a torque wrench to 97 ft
• lbf (131 N
• m, 13.4
kgf
• m) as soon as possible after changing wheels.
• When installing a tire, only use wheel nuts that have been specifically designed for
that wheel.
• If there are any cracks or deformations in the bolt screws, nut threads or bolt holes
of the wheel, have the vehicle inspected by your Lexus dealer.
• Do not attach a heavily damaged wheel or nament, as it may fly off the wheel while
the vehicle is moving.■
Replacing a flat tire for vehicles with power back door
In cases such as when replacing tires, make sure to turn off the power back door main
switch ( P. 130). Failure to do so may cause th e back door to operate unintentionally
if the power back door switch is accidental ly touched, resulting in hands and fingers
being caught and injured.
Page 543 of 632
5437-2. Steps to take in an emergency
LX570_OM_OM60R07U_(U) 7
When trouble arises Remove any dirt or foreign matter
from the wheel contact surface. If foreign matter is on the wheel contact
surface, the wheel nuts may loosen
while the vehicle is in motion, and the
tire may come off the vehicle.
Install the spare tire and loosely
tighten each nut by hand to approxi-
mately the same amount. Turn the nut washers until they come
into contact with the disc wheel.
Lower the vehicle.
Firmly tighten each nut two or three
times in the order shown in the illus-
tration. Tightening torque:
97 ft•lbf (131 N•m, 13.4 kgf•m)Installing the spare tire 1
Disc wheel Washer2
3
4
Page 544 of 632
544 7-2. Steps to take in an emergency
LX570_OM_OM60R07U_(U) Reinstall the wheel ornament. 5
20-inch tires
21-inch tires
Remove the center wheel ornament
from the flat tire by pushing from the
reverse side, and reinstall it. Make sure to push the center part of
the wheel ornament.