2017 TOYOTA AURIS Owners Manual (in English)

4657-3. Do-it-yourself maintenance
UK AURIS_HB_EE (OM12K97E)
7
Maintenance and care
■1ND-TV engine
Washer fluid tank
(P. 480)
Engine coolant reservoir
(P. 474)
Engine oil filler cap
(P. 470)
Engine oil level dipstick
(P. 467)Fuel filter (P. 481)
Battery (P. 477)
Fuse box (P. 508)
Radiator (P. 476)
Electric cooling fan
Condenser (P. 476)
Intercooler (P. 476)1
2
3
4
5
6
7
8
9
10
11
UK AURIS_HB_OM_Europe_OM12K97E.book 465 ページ ２０１６年６月２７日　月曜日　午後５時４２分

4667-3. Do-it-yourself maintenance
UK AURIS_HB_EE (OM12K97E)■
1WW engine
Washer fluid tank
(P. 480)
Engine coolant reservoir
(P. 474)
Engine oil filler cap
(P. 470)
Engine oil level dipstick
(P. 467)Fuel filter (P. 482)
Fuse box (P. 508)
Battery (P. 477)
Condenser (P. 476)
Electric cooling fans
Intercooler (P. 476)
Radiator (P. 476)1
2
3
4
5
6
7
8
9
10
11
UK AURIS_HB_OM_Europe_OM12K97E.book 466 ページ ２０１６年６月２７日　月曜日　午後５時４２分

4677-3. Do-it-yourself maintenance
UK AURIS_HB_EE (OM12K97E)
7
Maintenance and care
With the engine at operating temperature and turned off, check the oil
level on the dipstick.
■Checking the engine oil
Gasoline engine: Park the vehicle on level ground. After turning
off the engine, wait more than 5 minutes for the oil to drain back
into the bottom of the engine.
Diesel engine: Park the vehicle on level ground. After warming
up the engine and turning it off, wait more than 5 minutes for the
oil to drain back into the bottom of the engine.
Engine oil
1
UK AURIS_HB_OM_Europe_OM12K97E.book 467 ページ ２０１６年６月２７日　月曜日　午後５時４２分

4687-3. Do-it-yourself maintenance
UK AURIS_HB_EE (OM12K97E)
Holding a rag under the end, pull the dipstick out.2
1NR-FE engine1ZR-FAE engine
8NR-FTS engine1ND-TV engine
1WW engine
UK AURIS_HB_OM_Europe_OM12K97E.book 468 ページ ２０１６年６月２７日　月曜日　午後５時４２分

4697-3. Do-it-yourself maintenance
UK AURIS_HB_EE (OM12K97E)
7
Maintenance and care
Wipe the dipstick clean.
Reinsert the dipstick fully.
Holding a rag under the end, pull the dipstick out and check the
oil level.
Low
Normal
Excessive
The shape of the dipstick may differ depending on the type of
vehicle or engine.
Wipe the dipstick and reinsert it fully.3
4
5
1
2
3
Flat dipstickNon-flat dipstick type A
Non-flat dipstick type B
6
UK AURIS_HB_OM_Europe_OM12K97E.book 469 ページ ２０１６年６月２７日　月曜日　午後５時４２分

4707-3. Do-it-yourself maintenance
UK AURIS_HB_EE (OM12K97E)■
Adding engine oil
If the oil level is below or near the low level mark, add engine oil of
the same type as that already in the engine.
Make sure to check the oil type and prepare the items needed
before adding oil.
1NR-FE engine1ZR-FAE engine
8NR-FTS engine1ND-TV engine
1WW engine
UK AURIS_HB_OM_Europe_OM12K97E.book 470 ページ ２０１６年６月２７日　月曜日　午後５時４２分

4717-3. Do-it-yourself maintenance
UK AURIS_HB_EE (OM12K97E)
7
Maintenance and care
Remove the oil filler cap by turning it counterclockwise.
Add engine oil slowly, checking the dipstick.
Install the oil filler cap by turning it clockwise.
Engine oil selectionP. 615
Oil quantity
(Low  Full)
Gasoline engine
1.5 L (1.6 qt., 1.3 Imp. qt.)
Diesel engine
1.3 L (1.4 qt., 1.1 Imp. qt.)
Items Clean funnel
1
2
3
UK AURIS_HB_OM_Europe_OM12K97E.book 471 ページ ２０１６年６月２７日　月曜日　午後５時４２分

4727-3. Do-it-yourself maintenance
UK AURIS_HB_EE (OM12K97E)
■Engine oil consumption
A certain amount of engine oil will be consumed while driving. In the following
situations, oil consumption may increase, and engine oil may need to be
refilled in between oil maintenance intervals.
●When the engine is new, for example directly after purchasing the vehicle or
after replacing the engine
●If low quality oil or oil of an inappropriate viscosity is used
●When driving at high engine speeds or with a heavy load, when towing, or
when driving while accelerating or decelerating frequently
●When leaving the engine idling for a long time, or when driving frequently
through heavy traffic
■After changing the engine oil (8NR-FTS, 1ND-TV and 1WW engines only)
The engine oil maintenance data should be reset. Perform the following pro-
cedures:
Vehicles with a 3-ring meter
Switch the display to the trip meter “A” when the engine is running.
(P. 102)
Turn the engine switch off.
Vehicles without a smart entry & start system:
While pressing the display change switch or the “DISP” switch (P. 102),
turn the engine switch to the “ON” position (do not start the engine because
reset mode will be canceled). Continue to press and hold the switch until
the trip meter displays “000000”.
Vehicles with a smart entry & start system:
While pressing the display change switch or the “DISP” switch (P. 102),
turn the engine switch to the IGNITION ON mode (do not start the engine
because otherwise the reset mode will be canceled). Continue to press and
hold the switch until the trip meter displays “000000”.
Vehicles with a 2-ring meter
Switch the display to the trip meter “A” when the engine is running.
(P. 109)
Turn the engine switch off.
Vehicles without a smart entry & start system:
While pressing the “TRIP” switch (P. 109), turn the engine switch to the
“ON” position (do not start the engine because reset mode will be
canceled). Continue to press and hold the switch until the trip meter dis-
plays “00000”.
Vehicles with a smart entry & start system:
While pressing the “TRIP” switch (P. 109), turn the engine switch to the
IGNITION ON mode (do not start the engine because otherwise the reset
mode will be canceled). Continue to press and hold the switch until the trip
meter displays “00000”.
1
2
3
1
2
3
UK AURIS_HB_OM_Europe_OM12K97E.book 472 ページ ２０１６年６月２７日　月曜日　午後５時４２分