2017 CITROEN C-ELYSÉE Owners Manual

223
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
FREqUENTLY ASKED q UESTIONS
qUESTION ANSWER SOLUTION
The
 
CD   is   ejected  
automatically

  or   is   not  
played

  by   the   player. The
  CD   is   inserted   upside   down,   is   unplayable,   does   not   contain   any  
audio

  data   or   contains   an   audio   format   which   the   player   cannot   play.
The
  CD   is   protected   by   an   anti-pirating   protection   system   which   is   not  
recognised

  by   the   audio   equipment. -
 
Check
  that   the   CD   is   inserted   in   the   player   the  
right

  way   up.
-
 
Check
  the   condition   of   the   CD:   the   CD   cannot  
be

  played   if   it   is   too   damaged.
-
 
Check
  the   content   in   the   case   of   a   recorded  
CD:

  consult   the   advice   in   the   "Audio"   section.
-
 
The
  audio   equipment's   CD   player   does   not  
play

  DVDs.
-
 
Due
  to   their   quality   level,   certain   writeable  
CDs

  will   not   be   played   by   the   audio   system.
The
 
CD   player   sound   is  
poor

. The
  CD   used   is   scratched   or   of   poor   quality.Insert
  good   quality   CDs   and   store   them   in   suitable  
conditions.
The

  audio   settings   (bass,   treble,   ambience)   are   unsuitable.Set
  the   treble   or   bass   level   to   0,   without   selecting  
an

  ambience.
I
 
am
 
unable   to   connect  
my

 
Bluetooth   telephone. It
  is   possible   that   Bluetooth   is   switched   off   on   the   telephone   or   that   the  
telephone

  has   not   been   made   not   visible.-
 
Check
  that   your   telephone   has   Bluetooth  
switched

  on.
-
 
Check
  in   the   telephone's   settings   that   it   is  
"V

isible   to   all".
The
  Bluetooth   telephone   is   not   compatible   with   the   system.You
  can   check   the   compatibility   of   your   telephone  
on

  www.citroen.co.uk   (services).
The
 
Bluetooth   connection  
is

 
cut. The
  battery   of   the   peripheral   may   not   be   sufficiently   charged.Recharge
  the   battery   of   the   peripheral   device.

224
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
FREqUENTLY ASKED q UESTIONS
qUESTION ANSWER SOLUTION
The
 
message   "USB  
peripheral error"
or "Peripheral not
recognised"

  is   displayed  
in

 
the
 
screen. The
  USB   memory   stick   is   not   recognised.
The
  memory   stick   may   be   corrupt. Reformat
  the   memory   stick   (FAT32).
A telephone connects
automatically,
 
disconnecting

  another  
telephone. Automatic

  connection   overrides   manual   connection.Modify
  the   telephone   settings   to   remove   automatic  
connection.
The Apple
® player is
not
 
recognised   when  
connecting

  to   the   USB  
port. The Apple
® player is of a generation that is not compatible with a USB connection.
Connect
the Apple® player to the AUX  Jack   socket  using
 
a
 
suitable
 
cable   (not   supplied).
The
 
hard
 
disk
 
or
 
device
 
is

 
not
 
recognised
 
when
 
connecting

 
to
 
the
 
USB
 
port. Some

 
hard
 
disks
 
and
 
devices
 
need
 
a
 
power
 
supply
 
greater
 
than
 
is
 
provided

 
by
 
the
 
audio
 
system. Connect
 
the
 
device
  to   the   230   V   socket,   the   12   V  
socket

 
or
 
an
 
external   power   supply.
Caution:
 
ensure
 
that   the   device   does   not   transmit  
a

 
voltage
 
greater
 
than   5   V   (risk   of   destruction   of  
the

 
system).
When
 
streaming,
 
the
 
sound

 
cuts
 
momentarily. Some
 
telephones
 
prioritise
 
connection
 
of
 
the
 
"hands-free"
 
profile. Delete
 
the
 
"hands-free"   connection   profile   to  
improve

 
streaming.
In
 
"Random
 
all"
 
play,
 
not

 
all
 
of
 
the
 
tracks
 
are
 
played. In

 
"Random
 
all"
 
play,
 
the
 
system
 
can
 
only
 
take
 
into
 
account
 
up
 
to
 
999 tracks.

225
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016
qUESTIONANSWER SOLUTION
With
 
the   engine   off,   the  
audio

 
system   switches  
of

f
 
after   a   few   minutes  
of

 
use. When
  the   engine   is   switched   off,   the   audio   system   operating   time  
depends

  on   the   battery   charge.
The
  switch-off   is   normal:   the   audio   system   switches   to   economy   mode  
and

  switches   off   to   prevent   discharging   the   vehicle's   battery.Start
  the   vehicle's   engine   to   increase   the   battery  
charge.
The

 
message   "the   audio  
system

  is   overheated"  
appears

  on   the   display. In
  order   to   protect   the   installation   if   the   surrounding   temperature   is   too  
high,

  the   audio   system   switches   to   an   automatic   thermal   protection   mode  
leading

  to   a   reduction   of   the   volume   or   stopping   of   the   playing   of   the   CD.Switch
  the   audio   system   off   for   a   few   minutes   to  
allow

  the   system   to   cool.
FREqUENTLY ASKED q UESTIONS

226
C-elysee_en_Chap12a_RD5(RD45)_ed01-2016

227
C-elysee_en_Chap12b_RDE1_ed01-2016
Audio system
01 First steps
For safety reasons, the driver must only carry out operations  which   require   prolonged   attention   while   the  
vehicle

  is   stationary.
When
  the   engine   is   switched   off   and   to   prevent  
discharging

  of   the   battery,   the   system   switches   off   after  
activation

  of   economy   mode.
CONTENTS
02
Audio
system
03

Audio
settings
04

Screen
menu map(s)
Frequently asked questions p.
p.
p.
p.
p.
228
229
237
238
239

01
C-elysee_en_Chap12b_RDE1_ed01-2016
FIRST STEPS
228Selection   of   source:
FM1,   FM2,  
AM,
  CD,  
AUX.
Adjust
  audio   settings:
sound   ambience,   treble,   bass,  
loudness,

  left/right   balance,  
automatic

  volume.
Abandon   the   current  
operation.
Go

  up   one   level   (menu   or  
folder).
Automatic
  search   for   a   lower/
higher   radio   frequency.
Select   the   previous/next   CD  
track.
Navigation

  in   a   list.
Press   and   hold:   fast   forward  
or

  backward.
Eject   CD.
Manual search step by step
for   a   lower/higher   radio  
frequency

.
Select   the   previous/next  
MP3

  track.
Navigation   in   a   list.Open   the   main  
menu.
Select
  a   preset   radio   station.
Radio:   long   press:   preset   a   radio  
station.
Display
  the   list   of   stations   received,  
the

  CD/MP3   tracks   or   MP3   folders.
Long   press:   update   the   list   of  
stations

  received.
On   /   Off   and  
volume

  adjustment.

02
229
C-elysee_en_Chap12b_RDE1_ed01-2016
AUDIO
Press the SRC/BAND button several
times   in   succession   and   select   the   FM1,  
FM2

  or  
AM
  waveband.
Press a button to listen to the
corresponding
  preset   station. Press
  to   change   to   the   next   or   previous  
letter

  (e.g.  
A,
  B,   D,   F,   G,   J,   K,   ...).
Radio
Select the desired radio station then confirm  by   pressing  OK .
Selecting a station
Make  a   long   press   on  
LIST to construct
or

  update   the   list   of   stations;   the   sound  
is

  interrupted   temporarily.
The
 
external
 
environment
 
(hills,
 
buildings,
 
tunnels,
 
basement
 
car
 
parks)

 
may
 
block
 
reception,
 
including
 
in
 
RDS
 
mode.
 
This

 
is
 
a
 
normal
 
ef

fect
 
of
 
the
 
way
 
in
 
which
 
radio
 
waves
 
are
 
transmitted
 
and
 
does
 
not
 
indicate

 
any
 
failure
 
of
 
the
 
audio
 
equipment.
Selecting a preset station Make
 
a
 
long
 
press
 
on
 
a
 
button
 
to
 
preset

 
the
 
station
 
being
 
listened
 
to.
 
The

 
name

 
of
 
the
 
station
 
is
 
displayed
 
and
 
an
 
audible

 
signal
 
confirms
 
that
 
it
 
has
 
been
 
preset. Press

LIST
 to   display   the   list   of   stations  
received,

  in   alphabetical   order.

02
230
C-elysee_en_Chap12b_RDE1_ed01-2016
RDS, if displayed, enables you to continue listening to the same station  by   automatic   retuning   to   alternative   frequencies.   However,   in  
certain

  conditions,   coverage   by   an   RDS   station   may   not   be   assured  
throughout

  the   country   as   radio   stations   do   not   cover   100   %   of   the  
territory

.  
This
  explains   the   loss   of   reception   of   the   station   during   a  
journey

.
AUDIO
RDS
Press MENU.
Select "Radio"
  then   confirm   by  
pressing

 
OK
.
Select "RDS"
 

then   confirm   by  
pressing

 
OK
.
Select "On" or "Off" to switch RDS on
or
  off,   then   confirm   with   OK to save the
selection.
Receiving TA messages
The TA  (Traffic  Announcement)   function   gives   priority   to  T A  alert  messages.
 T o   operate,   this   function   needs   good   reception   of   a   radio  
station

  transmitting   this   type   of   message.   When   a   traffic   report   is  
transmitted,

  the   current   audio   source   (Radio,   CD,   ...)   is   interrupted  
automatically

  to   play   the  
T
A
 
message.   Normal   playback   of   the   audio  
source

  resumes   at   the   end   of   the   transmission   of   the   message.
Select "Radio"
  then   confirm   by  
pressing

 
OK
.
Select "Traffic TA"
  then   confirm   by  
pressing

 
OK
.
Select "On" or "Off" to switch on or off
the
  reception   of   traffic   announcements  
then

  confirm   by   pressing  
OK
to save
the
  selection.
Press MENU to switch on or off the
reception
  of   traffic   announcements.